Re: [Devmon] No SNMP data found for..

[Ken C. <kco...@ry...>]

Are you sure the leaf objects don't end with a .0 ?

>From the top of my head I'm pretty sure they do.....so tac it on and try.
On Nov 11, 2015 11:40 AM, "Steve B" <rec...@gm...> wrote:

> Hi All,
>
> I am making a template for an HP P2000 G3 and I have a nice table showing
> all the status for the sensors. They look like this:
>
> SensorHex       : .1.3.6.1.3.94.1.8.1.1 : branch
> SensorIdx       : .1.3.6.1.3.94.1.8.1.2 : branch
> SensorName      : .1.3.6.1.3.94.1.8.1.3 : branch
> SensorStatus    : .1.3.6.1.3.94.1.8.1.4 : branch
> SensorValue     : .1.3.6.1.3.94.1.8.1.6 : branch
> SensorType      : .1.3.6.1.3.94.1.8.1.7 : branch
> SensorMetric    : .1.3.6.1.3.94.1.8.1.8 : branch
>
> I am using the FCMGMT-MIB for this.
>
> Now say I want to make a new check, connectivity and start looking at:
>
> connUnitType            :       .1.3.6.1.3.94.1.6.1.3   :       leaf
> connUnitNumports        :       .1.3.6.1.3.94.1.6.1.4   :       leaf
> connUnitState           :       .1.3.6.1.3.94.1.6.1.5   :       leaf
> connUnitStatus          :       .1.3.6.1.3.94.1.6.1.6   :       leaf
> connUnitProduct         :       .1.3.6.1.3.94.1.6.1.7   :       leaf
>
> after putting these into the message file, I have 'unknown' for all the
> oids on my html page and in the devmon log file I have No SNMP data found
> for connUnitType etc  When I look at the mib info here:
>
> http://www.circitor.fr/Mibs/Html/FCMGMT-MIB.php
> or
> http://www.oidview.com/mibs/0/FCMGMT-MIB.html
>
> it looks as if this is branch info even if it's only on one line. So I
> tried using branch instead of leaf and made a table entry in message and
> then I had worldwide purple for devmon and had to restart it. Too many
> forks or similar..iirc
>
> Now I know this is a tough question but does anyone know why this is
> happening? I should still be able to use this as a leaf (the snmpwalk gives
> the value I am expecting to see) but it just won't digest my information. I
> am spefically interested in the 'No SNMP data found' and the unknown when a
> manual snmpwalk -v2c -c blabla is fine
>
> cheers
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>