From: Klomp, H. <kl...@nl...> - 2007-12-14 10:03:20
|
Dear Buchan, any help will be appriciated. I have no errors in de devmon log file. the system we are monitoring is : cisco WS-C6509 (R7000) processor (revision 3.0) with 458720K/65536K bytes= of memory. Processor board ID TBP06490026 SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset SuperLAT software (copyright 1990 by Meridian Technology Corp). X.25 software, Version 3.0.0. Bridging software. TN3270 Emulation software. 1 SSC-400 controller (1 IPSEC). 23 Virtual Ethernet/IEEE 802.3 interfaces 36 Gigabit Ethernet/IEEE 802.3 interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). Running devmon with the a host.db with only one 6509 switch in a host.db = file with the command: =2E/devmon -d test-template/hosts.db --debug -f I get no errors in de debug output, but I do see some interfaces with a c= ounterwrap. I attached a rrd file with the holes. Regards, Bert Klomp -----Original Message----- From: Buchan Milne [mailto:bg...@st...] Sent: donderdag 13 december 2007 17:44 To: dev...@li... Cc: Klomp, H. Subject: Re: [Devmon] if_load graphs are not stable On Thursday 22 November 2007 09:39:17 Klomp, H. wrote: > Hi all, > > I'm using devmon to graph de interface load of cisco switches. > However I notice that the if_load rrd informatie is not always updated. > The informatie in the web pages are correct, but when i look in the rrd > file, there is no update. Also when i look in the directory I find that= not > all the files are updated at the last devmon run. I'm not seeing this, at least I don't see any gaps in the if_load graphs = on any of the interfaces on our 6500s (some of which have about 6 48-port gi= g blades). Are you getting any errors on the hobbit size (e.g. about oversize messag= es or similar?). Can you provide a bit more detail, e.g. the HTML output from when the information is sent? Regards, Buchan |