Re: [Devmon] Template submission correction was: (no subject)

[Buchan M. <bg...@st...>]

On Tuesday 11 December 2007 17:44:02 Simeon Berkley wrote:
> Oops! After comparing the new svn repo with my templates, I just realized
> that the 3550 template that I included as mine was actually one that
> Schwimmer had written. My apologies for any confusion (though I haven't
> seen any feedback about the other ones yet).
>
> simeon berkley wrote:
> > I've tried to post these to the list using my original list subscription
> > email without success, so I've resorted to using another subscription. I
> > suspect that since we've heard nothing from Mr. Schwimmer since June(?)
> > that he's no longer maintaining devmon. I've heard nothing back from an
> > email to the list administrator's address. Anyway, attached are templates
> > for:
> >
> > Cisco Catalyst 3550
> > APC 9617 UPS
> > IBM RSA-II adaptor
> > Cisco Pix 6.3
> >
> > The APC is adapted from another of the APC UPS templates. The 3550 is an
> > adaptation of existing switch templates. The IBM RSA-II exercises what I
> > believe to be a bug in devmon's snmp querying subroutine and flaps
> > between white and green on the fans test.
> >
> > The Cisco Pix 6.3 could probably be adapted to other Pix versions. It
> > contains a tarred-up directory for the buffers tests, which for some
> > reason overload devmon and cause it to ditch all data if more than one
> > buffer's data is manipulated.
> >
> > Any feedback/suggestions on the Pix and RSA-II would be appreciated but
> > please don't reply to me directly, use the list.


I've just added the Dell PowerEdge templates I've been testing for a while.

We created a template a while back for a Cisco FWSM ... so far it looks to use 
the same OIDs as yours for the PIX. We didn't have a test for failover 
status, but we have an if_stat (mainly informational, so we know the 
interface names the firewall team uses).

The test names we have are conns,cpu,freemem (not sure why I didn't make it 
just 'mem',if_stat. Is there a reason to use different names than the 
standard Hobbit names?

We are graphing connections on our conns test (using my version of the 
extra-rrd.pl). I would really like to have CPU utilisation and memory graphs 
as well.

sysdescr for the FWSM is:
SNMPv2-MIB::sysDescr.0 = STRING: Cisco Firewall Services Module Version 3.1(4)

I have attached the templates I created for our FWSM, let's discuss the 
differences, and agree if we should use one template for both pix and FWSM.

I've added the APC and IBM RSA2 templates. Thanks.

Regards,
Buchan