Menu
▾
▴
Re: [Devmon] status always green
|
From: <pa...@ba...> - 2007-10-23 09:28:10
|
Hi Teresa,
By design, what you are doing will not change the test color from green.
You might have better luck using the threshold file. Maybe something
like this:
SensTemp1 : yellow : >24 : Sensor1 is above 24
SensTemp1 : red : >28 : Sensor1 is above 28
This way, using {SensTemp1.color} in message file will change the test
color.
Hope this helps.
Regards,
Pall Sigurdsson
Stewart, Tom L. wrote:
> I had a similar question and I have never had a response to anything
> else I have asked on this list since joining earlier this month. I am
> beginning to think that this is a dead list.
>
> Tom
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
> Teresa Kroeker
> Sent: Monday, October 22, 2007 10:43 AM
> To: dev...@li...
> Subject: Re: [Devmon] status always green
>
> I was able to create a transform that can create a correctly colored dot
> with:
>
> SColour1 : SWITCH : {SensTemp1} < 24 = &green, 24 - 28 =
> &yellow, > 28 = &red
>
> but the page color doesn't change. Will this be impossible to do?
>
> We need to get mail alerts when the temperature is too high and I can't
> get devmon to work they way I would like it to.
>
> Teresa Kroeker
>
> Teresa Kroeker wrote:
>
>> I am running hobbit 4.2.0 with the all-in-one patch and
>>
> devmon-0.3.0-beta2.
>
>> I have a Sensatronics temperature sensor that I am grabbing the
>> temperature from. I will show my configuration below only for two of
>> the four probes but it is the same for the other two. Some of the
>> configuration was added to see if that would make a difference (the
>> transform for the temperature is not needed but I though perhaps the
>> value was being interpreted as a string and that was why the threshold
>>
>
>
>> test was failing). I am always getting a green status. The threshold
>>
>
>
>> values are being correctly reported. I am also getting nice plots
>> (Aside - I needed to rename the test from temperature to temp to get
>> that working).
>>
>> One another note the RRD entry only has a integer value for the
>> temperature were as we are measuring more accurately. This is not
>> nearly as critical as being able to be alerted when the temperature
>> gets to high.
>>
>> <!--DEVMON RRD: temp 0 0
>> DS:temp:GAUGE:600:0:U
>> BA5290_Front 22
>> -->
>>
>> exceptions file is empty
>>
>> message file:
>>
>> TABLE:noalarmsmsg,rrd(DS:temp:STemp1:GAUGE)
>> Location | Temperature | Yellow | Red | Status
>> {SDescr1} | {STemp1.color}{STemp1} | {STemp1.thresh:yellow} |
>> {STemp1.thresh:red}| {STemp1.errors}{STemp1.msg}
>>
>> TABLE: noalarmsmsg,rrd(DS:temp:STemp2:GAUGE)
>> Location | Temperature | Yellow | Red | Status
>> {SDescr2} | {STemp2.color}{STemp2} | {STemp2.thresh:yellow} |
>> {STemp2.thresh:red} | {STemp2.errors}{STemp2.msg}
>>
>> oids file:
>>
>> SensDescr1 : .1.3.6.1.4.1.16174.1.1.1.3.1.1 : branch
>> SensTemp1 : .1.3.6.1.4.1.16174.1.1.1.3.1.2 : branch
>> SensData1 : .1.3.6.1.4.1.16174.1.1.1.3.1.3 : branch
>> SwitchStatI1 : .1.3.6.1.4.1.16174.1.1.1.3.1.4 : branch
>> SwitchStatC1 : .1.3.6.1.4.1.16174.1.1.1.3.1.5 : branch
>> SensDescr2 : .1.3.6.1.4.1.16174.1.1.1.3.2.1 : branch
>> SensTemp2 : .1.3.6.1.4.1.16174.1.1.1.3.2.2 : branch
>> SensData2 : .1.3.6.1.4.1.16174.1.1.1.3.2.3 : branch
>> SwitchStatI2 : .1.3.6.1.4.1.16174.1.1.1.3.2.4 : branch
>> SwitchStatC2 : .1.3.6.1.4.1.16174.1.1.1.3.2.5 : branch
>>
>> thresholds file:
>>
>> STemp1 : red : >22 : Too High
>> STemp1 : yellow : >21 : High
>> STemp1 : green : '_AUTOMATCH_' : Normal
>> STemp2 : red : >22 : Critical High
>> STemp2 : yellow : >21 : Warning High
>>
>> transforms file:
>>
>> SDescr1 : REGSUB : {SensDescr1}
>>
> /(\w+)\s+(\w+)/$1_$2/
>
>> SDescr2 : REGSUB : {SensDescr2}
>>
> /(\w+)\s+(\w+)/$1_$2/
>
>> STemp1 : MATH : {SensTemp1} x 1
>> STemp2 : MATH : {SensTemp2} x 1
>>
>>
>> Output:
>>
>> Location Temperature Yellow Red Status
>> BA5290_Front green 22.30 >21 >22 Undefined
>>
>> Location Temperature Yellow Red Status
>> BA5290_Back green 22.00 >21 >22 Undefined
>>
>> Clearly the values are over the limits I have assigned and not green.
>>
>> Can someone please help as I have run out of ideas?
>>
>> Teresa Kroeker
>>
>> ----------------------------------------------------------------------
>> --- This SF.net email is sponsored by: Splunk Inc.
>> Still grepping through log files to find problems? Stop.
>> Now Search log events and configuration files using AJAX and a
>>
> browser.
>
>> Download your FREE copy of Splunk now >> http://get.splunk.com/
>> _______________________________________________
>> Devmon-support mailing list
>> Dev...@li...
>> https://lists.sourceforge.net/lists/listinfo/devmon-support
>>
>
>
> ------------------------------------------------------------------------
> -
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems? Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems? Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
|
