Re: [Devmon] status always green

[Teresa K. <kr...@cs...>]

I was able to create a transform that can create a correctly colored dot 
with:

SColour1        : SWITCH        : {SensTemp1} < 24 = &green, 24 - 28 = 
&yellow, > 28 = &red

but the page color doesn't change.  Will this be impossible to do?

We need to get mail alerts when the temperature is too high and I can't 
get devmon to work they way I would like it to.

Teresa Kroeker

Teresa Kroeker wrote:
> I am running hobbit 4.2.0 with the all-in-one patch and devmon-0.3.0-beta2.
> 
> I have a Sensatronics temperature sensor that I am grabbing the 
> temperature from.  I will show my configuration below only for two of 
> the four probes but it is the same for the other two.  Some of the 
> configuration was added to see if that would make a difference (the 
> transform for the temperature is not needed but I though perhaps the 
> value was being interpreted as a string and that was why the threshold 
> test was failing).  I am always getting a green status.  The threshold 
> values are being correctly reported.  I am also getting nice plots 
> (Aside - I needed to rename the test from temperature to temp to get 
> that working).
> 
> One another note the RRD entry only has a integer value for the 
> temperature were as we are measuring more accurately.  This is not 
> nearly as critical as being able to be alerted when the temperature gets 
> to high.
> 
> <!--DEVMON RRD: temp 0 0
> DS:temp:GAUGE:600:0:U
> BA5290_Front 22
> -->
> 
> exceptions file is empty
> 
> message file:
> 
> TABLE:noalarmsmsg,rrd(DS:temp:STemp1:GAUGE)
> Location | Temperature | Yellow | Red | Status
> {SDescr1} |	{STemp1.color}{STemp1} | {STemp1.thresh:yellow} | 
> {STemp1.thresh:red}| {STemp1.errors}{STemp1.msg}
> 
> TABLE: noalarmsmsg,rrd(DS:temp:STemp2:GAUGE)
> Location | Temperature | Yellow | Red | Status
> {SDescr2} |	{STemp2.color}{STemp2} | {STemp2.thresh:yellow} | 
> {STemp2.thresh:red} | {STemp2.errors}{STemp2.msg}
> 
> oids file:
> 
> SensDescr1	: .1.3.6.1.4.1.16174.1.1.1.3.1.1	: branch
> SensTemp1	: .1.3.6.1.4.1.16174.1.1.1.3.1.2	: branch
> SensData1	: .1.3.6.1.4.1.16174.1.1.1.3.1.3	: branch
> SwitchStatI1	: .1.3.6.1.4.1.16174.1.1.1.3.1.4	: branch
> SwitchStatC1	: .1.3.6.1.4.1.16174.1.1.1.3.1.5	: branch
> SensDescr2	: .1.3.6.1.4.1.16174.1.1.1.3.2.1	: branch
> SensTemp2	: .1.3.6.1.4.1.16174.1.1.1.3.2.2	: branch
> SensData2	: .1.3.6.1.4.1.16174.1.1.1.3.2.3	: branch
> SwitchStatI2	: .1.3.6.1.4.1.16174.1.1.1.3.2.4	: branch
> SwitchStatC2	: .1.3.6.1.4.1.16174.1.1.1.3.2.5	: branch
> 
> thresholds file:
> 
> STemp1	: red		: >22		: Too High
> STemp1	: yellow	: >21		: High
> STemp1	: green 	: '_AUTOMATCH_' : Normal
> STemp2	: red		: >22		: Critical High
> STemp2	: yellow	: >21		: Warning High
> 
> transforms file:
> 
> SDescr1		: REGSUB	: {SensDescr1} /(\w+)\s+(\w+)/$1_$2/
> SDescr2		: REGSUB	: {SensDescr2} /(\w+)\s+(\w+)/$1_$2/
> STemp1		: MATH		: {SensTemp1} x 1
> STemp2		: MATH		: {SensTemp2} x 1
> 
> 
> Output:
> 
> Location 	Temperature 	Yellow 	Red 	Status
> BA5290_Front 	green 22.30 	>21 	>22	Undefined
> 
> Location 	Temperature 	Yellow 	Red 	Status
> BA5290_Back 	green 22.00 	>21 	>22 	Undefined
> 
> Clearly the values are over the limits I have assigned and not green.
> 
> Can someone please help as I have run out of ideas?
> 
> Teresa Kroeker
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support