[Devmon] status always green

[Teresa K. <kr...@cs...>]

I am running hobbit 4.2.0 with the all-in-one patch and devmon-0.3.0-beta2.

I have a Sensatronics temperature sensor that I am grabbing the 
temperature from.  I will show my configuration below only for two of 
the four probes but it is the same for the other two.  Some of the 
configuration was added to see if that would make a difference (the 
transform for the temperature is not needed but I though perhaps the 
value was being interpreted as a string and that was why the threshold 
test was failing).  I am always getting a green status.  The threshold 
values are being correctly reported.  I am also getting nice plots 
(Aside - I needed to rename the test from temperature to temp to get 
that working).

One another note the RRD entry only has a integer value for the 
temperature were as we are measuring more accurately.  This is not 
nearly as critical as being able to be alerted when the temperature gets 
to high.

<!--DEVMON RRD: temp 0 0
DS:temp:GAUGE:600:0:U
BA5290_Front 22
-->

exceptions file is empty

message file:

TABLE:noalarmsmsg,rrd(DS:temp:STemp1:GAUGE)
Location | Temperature | Yellow | Red | Status
{SDescr1} |	{STemp1.color}{STemp1} | {STemp1.thresh:yellow} | 
{STemp1.thresh:red}| {STemp1.errors}{STemp1.msg}

TABLE: noalarmsmsg,rrd(DS:temp:STemp2:GAUGE)
Location | Temperature | Yellow | Red | Status
{SDescr2} |	{STemp2.color}{STemp2} | {STemp2.thresh:yellow} | 
{STemp2.thresh:red} | {STemp2.errors}{STemp2.msg}

oids file:

SensDescr1	: .1.3.6.1.4.1.16174.1.1.1.3.1.1	: branch
SensTemp1	: .1.3.6.1.4.1.16174.1.1.1.3.1.2	: branch
SensData1	: .1.3.6.1.4.1.16174.1.1.1.3.1.3	: branch
SwitchStatI1	: .1.3.6.1.4.1.16174.1.1.1.3.1.4	: branch
SwitchStatC1	: .1.3.6.1.4.1.16174.1.1.1.3.1.5	: branch
SensDescr2	: .1.3.6.1.4.1.16174.1.1.1.3.2.1	: branch
SensTemp2	: .1.3.6.1.4.1.16174.1.1.1.3.2.2	: branch
SensData2	: .1.3.6.1.4.1.16174.1.1.1.3.2.3	: branch
SwitchStatI2	: .1.3.6.1.4.1.16174.1.1.1.3.2.4	: branch
SwitchStatC2	: .1.3.6.1.4.1.16174.1.1.1.3.2.5	: branch

thresholds file:

STemp1	: red		: >22		: Too High
STemp1	: yellow	: >21		: High
STemp1	: green 	: '_AUTOMATCH_' : Normal
STemp2	: red		: >22		: Critical High
STemp2	: yellow	: >21		: Warning High

transforms file:

SDescr1		: REGSUB	: {SensDescr1} /(\w+)\s+(\w+)/$1_$2/
SDescr2		: REGSUB	: {SensDescr2} /(\w+)\s+(\w+)/$1_$2/
STemp1		: MATH		: {SensTemp1} x 1
STemp2		: MATH		: {SensTemp2} x 1


Output:

Location 	Temperature 	Yellow 	Red 	Status
BA5290_Front 	green 22.30 	>21 	>22	Undefined

Location 	Temperature 	Yellow 	Red 	Status
BA5290_Back 	green 22.00 	>21 	>22 	Undefined

Clearly the values are over the limits I have assigned and not green.

Can someone please help as I have run out of ideas?

Teresa Kroeker