Re: [Devmon] Devmon kicking back "no snmp data found"

[Joshua K. <jos...@tr...>]

here is some more info.  The model and vendor I am dealing with is  
"liebert-nfinity".  I have these templates I have created in this  
folder are:
dev_info
power
bypass
module
battery

Now let's just work on the module directory.  I have these files  
created in there:
exceptions
message
oids
thresholds
transforms

The exceptions, thresholds, and transforms files are empty.  But  
message and oids file contain this:
MESSAGE:
Control Modules
	
		Installed:	{conModsInstall}
#		Failed:		{conFailedMods}
#		Redundant:	{conRedunMods}

Battery Modules

#		Installed:	{battModsInstall}
#		Failed:		{battFailedMods}
#		Active:		{battActiveMods}
#		Warnings:	{battModWarns}

Power Modules

#		Installed:	{pwrModsInstall}
#		Failed:		{pwrFailedMods}
#		Redundant:	{pwrRedunMods}
#		Active:		{pwrActiveMods}
#		Warnings:	{pwrModWarns}

OIDS:
conModsInstall:		.1.3.6.1.4.1.476.1.42.3.6.1.0		:leaf
#conFailedMods:		.1.3.6.1.4.1.476.1.42.3.6.2.0		:leaf
#conRedunMods:		.1.3.6.1.4.1.476.1.42.3.6.3.0		:leaf
#pwrModsInstall: 	.1.3.6.1.4.1.476.1.42.3.5.5.1.0        	:leaf
#pwrFailedMods: 		.1.3.6.1.4.1.476.1.42.3.5.5.2.0      	:leaf
#pwrActiveMods: 		.1.3.6.1.4.1.476.1.42.3.5.5.4.0        	:leaf
#pwrRedunMods: 		.1.3.6.1.4.1.476.1.42.3.5.5.3.0        	:leaf
#pwrModWarns: 		.1.3.6.1.4.1.476.1.42.3.5.5.6.0        	:leaf
#battModsInstall:	.1.3.6.1.4.1.476.1.42.3.5.1.1.0       	:leaf
#battFailedMods:		.1.3.6.1.4.1.476.1.42.3.5.1.2.0		:leaf
#battActiveMods:		.1.3.6.1.4.1.476.1.42.3.5.1.4.0		:leaf
#battModWarns:		.1.3.6.1.4.1.476.1.42.3.5.1.6.0		:leaf


Now the problem I am experiencing is if i uncomment "conFailedMods"  
from the message and oids file.  I start getting the no snmp data, etc  
as listed below.  This happens when i uncomment any of these lines  
from the message and the oids file.  Hopefully this will give  
everybody a better idea of thwat is going on.

Josh


On Oct 1, 2007, at 4:58 PM, Joshua Krause wrote:

> I have created some new templates for some dc power and ups
> equipment.  And have gotten to a point to where when i add a test
> devmon starts spitting out log entries like this:
>
> [07-10-01@16:52:15] No SNMP data found for bypassVolt on gsonc-ash- 
> ups-1
> [07-10-01@16:52:15] No SNMP data found for inVolts on gsonc-ash-ups-1
> [07-10-01@16:52:15] No SNMP data found for outSource on gsonc-ash- 
> ups-1
> [07-10-01@16:52:15] No SNMP data found for outVolts on gsonc-ash-ups-1
> [07-10-01@16:52:15] No SNMP data found for outCurrent on gsonc-ash- 
> ups-1
> [07-10-01@16:52:15] No SNMP data found for inFreq on gsonc-ash-ups-1
> [07-10-01@16:52:15] No SNMP data found for inCurrent on gsonc-ash- 
> ups-1
> [07-10-01@16:52:15] No SNMP data found for outFreq on gsonc-ash-ups-1
> [07-10-01@16:52:15] No SNMP data found for conFailedMods on gsonc-ash-
> ups-1
> [07-10-01@16:52:15] No SNMP data found for conModsInstall on gsonc- 
> ash-
> ups-1
>
> I can restart devmon and everything starts polling right but the
> minute i try and add something or tweak a template it does the same
> thing.
>
> any help would be great
>
> Thanks
> Josh
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support