Re: [Devmon] cisco templates

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

On Fri, 2007-09-21 at 11:44 -0400, Joshua Krause wrote:
> I tried throwing an exception in this format:
> 
> ifAdminStatNum : ignore : down(2)

Try just "2"   the down is being added from the MIB your OID is only
reporting 2

There is an option in snmpwalk to turn that off so you can see just the
stat being pulled.

Look at your transform file you should see something similar to this:

ifAdminStatTxt  : SWITCH        : {ifAdminStatNum} 1=up,2=admin
down,3=testing
ifOperStatTxt   : SWITCH        : {ifOperStatNum}
1=up,2=down,3=testing,4=unknown,5=dormant,6=not present,7=lowe
r layer down
ifStat          : BEST          : {ifAdminStatTxt},{ifOperStatTxt}
ifSpeed         : SPEED         : {ifBps}
ifAliasBox      : REGSUB        : {ifAlias} /(\S+.*)/ [$1]/

This shows where the "admin down" gets defined from to be displayed

> 
> Which i was hoping that it would just not display anything with a  
> down(2) state.  But when i do an snmpwalk with the "ifAdminStatNum" it  
> doesn't kick back anything.
> 
> [hobbit@gsonc-spg-ops-1 if_stat]$ snmpwalk -v 2c -c public gsonc- 
> arc-4948-1 ifAdminStatNum
> ifAdminStatNum: Unknown Object Identifier (Sub-id not found: (top) ->  
> ifAdminStatNum)
> 
> 
> but if i do this:
> 
> [hobbit@gsonc-spg-ops-1 if_stat]$ snmpwalk -v 2c -c public gsonc- 
> arc-4948-1 ifAdminStatus
> IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.3 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.4 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.5 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.6 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.7 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.8 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.9 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.10 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.11 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.12 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.13 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.14 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.15 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.16 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.17 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.18 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.19 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.20 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.21 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.22 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.23 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.24 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.25 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.26 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.27 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.28 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.29 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.30 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.31 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.32 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.33 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.34 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.35 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.36 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.37 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.38 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.39 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.40 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.41 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.42 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.43 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.44 = INTEGER: down(2)
> IF-MIB::ifAdminStatus.45 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.46 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.47 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.48 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.49 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.50 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.51 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.52 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.53 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.54 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.55 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.56 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.57 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.58 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.59 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.60 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.61 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.62 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.63 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.64 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.65 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.66 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.67 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.68 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.69 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.70 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.71 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.72 = INTEGER: up(1)
> IF-MIB::ifAdminStatus.73 = INTEGER: up(1)
> 
> 
> Now the current oids file for if_stat has these listed:
> 
> [hobbit@gsonc-spg-ops-1 if_stat]$ more oids
> ifName		: .1.3.6.1.2.1.31.1.1.1.1	: branch
> ifAlias		: .1.3.6.1.2.1.31.1.1.1.18	: branch
> ifBps		: .1.3.6.1.2.1.2.2.1.5		: branch
> ifAdminStatNum	: .1.3.6.1.2.1.2.2.1.7		: branch
> ifOperStatNum	: .1.3.6.1.2.1.2.2.1.8		: branch
> 
> 
> Do these names need to match an actual name on the device itself?  Or  
> do the OID's just need to be correct?  Or do both need to match?
> 
> On Sep 21, 2007, at 11:29 AM, Trent Melcher wrote:
> 
> > Look at the exception file in your templates.  The answer is in there.
> > Also look at the TEMPLATES document in the doc folder.
> >
> > Trent
> >
> > -----Original Message-----
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf Of
> > Joshua Krause
> > Sent: Friday, September 21, 2007 10:23 AM
> > To: dev...@li...
> > Subject: [Devmon] cisco templates
> >
> > How can i go about not showing any interface that is in an "admin
> > down" state.  But i would like to exclude them from all test.  Until
> > they are made active.
> >
> > thanks
> >
> > ------------------------------------------------------------------------
> > -
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2005.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2005.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support

Re: [Devmon] cisco templates

SNMP poller for Xymon

Re: [Devmon] cisco templates