Menu
▾
▴
Re: [Devmon] cisco templates
|
From: Joshua K. <jos...@tr...> - 2007-09-21 15:44:44
|
I tried throwing an exception in this format: ifAdminStatNum : ignore : down(2) Which i was hoping that it would just not display anything with a down(2) state. But when i do an snmpwalk with the "ifAdminStatNum" it doesn't kick back anything. [hobbit@gsonc-spg-ops-1 if_stat]$ snmpwalk -v 2c -c public gsonc- arc-4948-1 ifAdminStatNum ifAdminStatNum: Unknown Object Identifier (Sub-id not found: (top) -> ifAdminStatNum) but if i do this: [hobbit@gsonc-spg-ops-1 if_stat]$ snmpwalk -v 2c -c public gsonc- arc-4948-1 ifAdminStatus IF-MIB::ifAdminStatus.2 = INTEGER: up(1) IF-MIB::ifAdminStatus.3 = INTEGER: up(1) IF-MIB::ifAdminStatus.4 = INTEGER: up(1) IF-MIB::ifAdminStatus.5 = INTEGER: up(1) IF-MIB::ifAdminStatus.6 = INTEGER: up(1) IF-MIB::ifAdminStatus.7 = INTEGER: down(2) IF-MIB::ifAdminStatus.8 = INTEGER: down(2) IF-MIB::ifAdminStatus.9 = INTEGER: down(2) IF-MIB::ifAdminStatus.10 = INTEGER: down(2) IF-MIB::ifAdminStatus.11 = INTEGER: down(2) IF-MIB::ifAdminStatus.12 = INTEGER: down(2) IF-MIB::ifAdminStatus.13 = INTEGER: down(2) IF-MIB::ifAdminStatus.14 = INTEGER: down(2) IF-MIB::ifAdminStatus.15 = INTEGER: down(2) IF-MIB::ifAdminStatus.16 = INTEGER: down(2) IF-MIB::ifAdminStatus.17 = INTEGER: down(2) IF-MIB::ifAdminStatus.18 = INTEGER: up(1) IF-MIB::ifAdminStatus.19 = INTEGER: up(1) IF-MIB::ifAdminStatus.20 = INTEGER: up(1) IF-MIB::ifAdminStatus.21 = INTEGER: up(1) IF-MIB::ifAdminStatus.22 = INTEGER: down(2) IF-MIB::ifAdminStatus.23 = INTEGER: down(2) IF-MIB::ifAdminStatus.24 = INTEGER: down(2) IF-MIB::ifAdminStatus.25 = INTEGER: down(2) IF-MIB::ifAdminStatus.26 = INTEGER: down(2) IF-MIB::ifAdminStatus.27 = INTEGER: down(2) IF-MIB::ifAdminStatus.28 = INTEGER: down(2) IF-MIB::ifAdminStatus.29 = INTEGER: down(2) IF-MIB::ifAdminStatus.30 = INTEGER: down(2) IF-MIB::ifAdminStatus.31 = INTEGER: down(2) IF-MIB::ifAdminStatus.32 = INTEGER: down(2) IF-MIB::ifAdminStatus.33 = INTEGER: down(2) IF-MIB::ifAdminStatus.34 = INTEGER: up(1) IF-MIB::ifAdminStatus.35 = INTEGER: down(2) IF-MIB::ifAdminStatus.36 = INTEGER: down(2) IF-MIB::ifAdminStatus.37 = INTEGER: down(2) IF-MIB::ifAdminStatus.38 = INTEGER: down(2) IF-MIB::ifAdminStatus.39 = INTEGER: down(2) IF-MIB::ifAdminStatus.40 = INTEGER: down(2) IF-MIB::ifAdminStatus.41 = INTEGER: down(2) IF-MIB::ifAdminStatus.42 = INTEGER: down(2) IF-MIB::ifAdminStatus.43 = INTEGER: down(2) IF-MIB::ifAdminStatus.44 = INTEGER: down(2) IF-MIB::ifAdminStatus.45 = INTEGER: up(1) IF-MIB::ifAdminStatus.46 = INTEGER: up(1) IF-MIB::ifAdminStatus.47 = INTEGER: up(1) IF-MIB::ifAdminStatus.48 = INTEGER: up(1) IF-MIB::ifAdminStatus.49 = INTEGER: up(1) IF-MIB::ifAdminStatus.50 = INTEGER: up(1) IF-MIB::ifAdminStatus.51 = INTEGER: up(1) IF-MIB::ifAdminStatus.52 = INTEGER: up(1) IF-MIB::ifAdminStatus.53 = INTEGER: up(1) IF-MIB::ifAdminStatus.54 = INTEGER: up(1) IF-MIB::ifAdminStatus.55 = INTEGER: up(1) IF-MIB::ifAdminStatus.56 = INTEGER: up(1) IF-MIB::ifAdminStatus.57 = INTEGER: up(1) IF-MIB::ifAdminStatus.58 = INTEGER: up(1) IF-MIB::ifAdminStatus.59 = INTEGER: up(1) IF-MIB::ifAdminStatus.60 = INTEGER: up(1) IF-MIB::ifAdminStatus.61 = INTEGER: up(1) IF-MIB::ifAdminStatus.62 = INTEGER: up(1) IF-MIB::ifAdminStatus.63 = INTEGER: up(1) IF-MIB::ifAdminStatus.64 = INTEGER: up(1) IF-MIB::ifAdminStatus.65 = INTEGER: up(1) IF-MIB::ifAdminStatus.66 = INTEGER: up(1) IF-MIB::ifAdminStatus.67 = INTEGER: up(1) IF-MIB::ifAdminStatus.68 = INTEGER: up(1) IF-MIB::ifAdminStatus.69 = INTEGER: up(1) IF-MIB::ifAdminStatus.70 = INTEGER: up(1) IF-MIB::ifAdminStatus.71 = INTEGER: up(1) IF-MIB::ifAdminStatus.72 = INTEGER: up(1) IF-MIB::ifAdminStatus.73 = INTEGER: up(1) Now the current oids file for if_stat has these listed: [hobbit@gsonc-spg-ops-1 if_stat]$ more oids ifName : .1.3.6.1.2.1.31.1.1.1.1 : branch ifAlias : .1.3.6.1.2.1.31.1.1.1.18 : branch ifBps : .1.3.6.1.2.1.2.2.1.5 : branch ifAdminStatNum : .1.3.6.1.2.1.2.2.1.7 : branch ifOperStatNum : .1.3.6.1.2.1.2.2.1.8 : branch Do these names need to match an actual name on the device itself? Or do the OID's just need to be correct? Or do both need to match? On Sep 21, 2007, at 11:29 AM, Trent Melcher wrote: > Look at the exception file in your templates. The answer is in there. > Also look at the TEMPLATES document in the doc folder. > > Trent > > -----Original Message----- > From: dev...@li... > [mailto:dev...@li...] On Behalf Of > Joshua Krause > Sent: Friday, September 21, 2007 10:23 AM > To: dev...@li... > Subject: [Devmon] cisco templates > > How can i go about not showing any interface that is in an "admin > down" state. But i would like to exclude them from all test. Until > they are made active. > > thanks > > ------------------------------------------------------------------------ > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Devmon-support mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devmon-support > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Devmon-support mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devmon-support |
