RE: [Devmon] NetApp

[Whilding, C. <Cra...@me...>]

The only problem I have is a quota set to unlimited (-1) showing as
-29.xx%. Cant do much about it as the exceptions only work on the
primary alias in the table.

I haven't had that. Another devmon user had a problem with large numbers
going negative, I think it was fixed in the patch that was sent out.

Craig

=20

________________________________

From: dev...@li...
[mailto:dev...@li...] On Behalf Of Aiello,
Steve (GE, Corporate, consultant)
Sent: 09 March 2006 15:17
To: dev...@li...
Subject: RE: [Devmon] NetApp

=20

Curious, When pulling Disk/Volume information do you get negative
values? On two of my netapps, for one very large FileSystem I get
negative values on size..

	-----Original Message-----
	From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Whilding, Craig
	Sent: Thursday, March 09, 2006 10:12 AM
	To: dev...@li...
	Subject: RE: [Devmon] NetApp

	I don't appear to have any ifName data so the primary field in
the table fails.

	=20

	That data would be useful here also. I only currently do a
hobbit service check for cifs.

	=20

	=20

=09
________________________________


	From: dev...@li...
[mailto:dev...@li...] On Behalf Of Aiello,
Steve (GE, Corporate, consultant)
	Sent: 09 March 2006 14:54
	To: dev...@li...
	Subject: RE: [Devmon] NetApp

	=20

	Oh yeah....

	=20

	I also have the generic if_load in my netapp template, works
great.

	=20

	I was also thinking about doing a nfs & cifs stats test too, so
I can report on the general usage of the netapp. This data aids in our
capacity planning.  Just haven't had much time to dedicate to this yet.=20

		-----Original Message-----
		From: Aiello, Steve (GE, Corporate, consultant)=20
		Sent: Thursday, March 09, 2006 9:50 AM
		To: 'dev...@li...'
		Subject: RE: [Devmon] NetApp

		Here is my cpu test for the netapps.

		=20

		Seems I put my device info in the cpu test, and you have
some under the stats test. I also have something simular to your volume
test, but I called it disk. I also tried to format the data in the same
manner a 'df' command on *NIX.  I did it this way, so that my trending
tool (larrd) would start trending on the data instantly..  I forgot
about the HTML format, that is causing issues.

		=20

		Thanks for sharing your netapp template, saves me time
:)

		=20

		Steven=20

			-----Original Message-----
			From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Whilding, Craig
			Sent: Thursday, March 09, 2006 9:38 AM
			To: dev...@li...
			Subject: RE: [Devmon] NetApp

			Snapmirror lag now done, it is designed to check
all snapmirrors that run weekly. It will also report daily ones but wont
alert if these take too long as there is no logic in devmon to check
which is which.

			=20

			Craig

			=20

			=20

		=09
________________________________


			From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Whilding, Craig
			Sent: 09 March 2006 11:29
			To: dev...@li...
			Subject: [Devmon] NetApp

			=20

			Here's what I've done for NetApp monitoring. I
need to add in a check for snapmirror to meet our companies global
policy on monitoring but the other bits are there.=20

			=20

			CPU currently just shows uptime as it was copied
across from a cisco template. If anyone wants to add in something
meaningful here it would be good.

			=20

			Something that could be useful is a "not-tests"
option for bb-hosts as quotas are not enabled on certain filers (same
with snapmirror) so I don't want to show these as opposed to writing all
the others I do want shown.

			=20

			Please come back with any changes or
improvements.

			=20

			Thanks,

			=20

			Craig