From: Aiello, S. \(G. C. consultant\) <ste...@ge...> - 2006-03-07 16:24:38
|
I didn't copy, I just hardcoded the device to us the existing 6509 template. From memory, most/if not all of the existing template did not work. Since then I have been working with polling my F5BigIP & NetApp Filers. Have had time to revisit the switches yet. > -----Original Message----- > From: dev...@li...=20 > [mailto:dev...@li...] On Behalf=20 > Of Schwimmer, Eric E *HS > Sent: Tuesday, March 07, 2006 11:03 AM > To: dev...@li... > Subject: RE: [Devmon] 6509 problem. >=20 >=20 >=20 > Hrm. This could be a different problem that the one Thomas=20 > was reporting. >=20 > You are running CatOS instead of IOS; the template was > made for a 6509 running in routing mode (with an RSM and SUP=20 > card). We don't have any 6509s running CatOS, so I'm not going to be=20 > able to troubleshoot very much. W >=20 > hat I can tell you is that, while CatOS uses a different MIB that=20 > IOS, the templates use mostly generic OIDs that any sane l2 device=20 > should respond to (a few exceptions being the fan & psu state=20 > oids, as=20 > well as the collision counter, all of which are cisco IOS specific). >=20 > I'd try copying the cisco-6509 directory to something like=20 > "cisco-6509sw", and changing the sysdesc field in the spec=20 > file to 'C6509' or somesuch. Then run the template against=20 > your 6509 and see what fails, and either change or remove it=20 > from the template. >=20 > -Eric >=20 > > -----Original Message----- > > From: dev...@li... > > [mailto:dev...@li...] On Behalf=20 > > Of Aiello, Steve (GE, Corporate, consultant) > > Sent: Tuesday, March 07, 2006 10:43 AM > > To: dev...@li... > > Subject: RE: [Devmon] 6509 problem. > >=20 > > I believe I have the same issue. Not sure if the 6509=20 > template fits my=20 > > 6509s. Checking the sysDescr, I see: > >=20 > > SNMPv2-MIB::sysDescr.0 =3D STRING: Cisco Systems WS-C6509 > > Cisco Catalyst Operating System Software, Version 6.4(2)=20 > Copyright (c)=20 > > 1995-2003 by Cisco Systems > >=20 > > The template is filtering on this string for "c6sup", and > > that is not in > > the above text. That is why the autodetect is not working. I=20 > > am told our > > cisco devices are: > > Model : cisco WS-C6509 > > Model : cisco WS-C6509-E > >=20 > > Would assume these devices respond to different MIBs than=20 > the devices=20 > > the 'out-of-box' cisco-6509 template. I just have not had=20 > time to dig=20 > > further into this, though. > >=20 > > Steven > >=20 > > > -----Original Message----- > > > From: dev...@li... > > > [mailto:dev...@li...] On Behalf=20 > > > Of Thomas > > > Sent: Tuesday, March 07, 2006 10:18 AM > > > To: dev...@li... > > > Subject: [Devmon] 6509 problem. > > >=20 > > >=20 > > > I have a problem with devmonand my cisco 6509s. They are not auto > > > detected and when I configure DEVMON with model tag I get=20 > > > the following=20 > > > in the logfile > > >=20 > > > [06-03-07@16:01:48] No SNMP data found for ifInDiscards on > > > cisco6509 [06-03-07@16:01:48] No SNMP data found for=20 > > > ifOutOctets on cisco6509 [06-03-07@16:01:48] No SNMP data=20 > > > found for ifName on cisco6509 [06-03-07@16:01:48] No SNMP=20 > > > data found for ifOutDiscards on cisco6509 [06-03-07@16:01:48]=20 > > > No SNMP data found for ifAlias on cisco6509=20 > > > [06-03-07@16:01:48] Missing primary oid data for trans_regsub=20 > > > on ifAliasBox [06-03-07@16:01:48] Missing repeater data for=20 > > > trans_delta on ifOutDps [06-03-07@16:01:48] Missing repeater=20 > > > data for trans_delta on ifOutOps [06-03-07@16:01:48] Data=20 > > > type mismatch for leaf 1 of ifOutOps on=20 > > > cisco6509: 'Missing primary oid data' does not match regex=20 > > > '^[-+]?\d+(\.\d+)?$' > > > [06-03-07@16:01:48] Data type mismatch for leaf 1 of ifOutDps on=20 > > > cisco6509: 'Missing primary oid data' does not match regex=20 > > > '^[-+]?\d+(\.\d+)?$' > > > [06-03-07@16:01:48] Missing repeater data for trans_delta on=20 > > > ifInDps [06-03-07@16:01:48] Data type mismatch for leaf 1 of=20 > > > ifInDps on=20 > > > cisco6509: 'Missing primary oid data' does not match regex=20 > > > '^[-+]?\d+(\.\d+)?$'[06-03-07@16:01:48] Missing repeater data=20 > > > for ifName=20 > > > for if_dsc msg > > > [06-03-07@16:01:48] No SNMP data found for sysReloadReason on=20 > > > cisco6509 [06-03-07@16:01:48] No SNMP data found for=20 > > > CPUTotal5Min on cisco6509 [06-03-07@16:01:48] No SNMP data=20 > > > found for ifOperStatNum on cisco6509 [06-03-07@16:01:48] No=20 > > > SNMP data found for ifName on cisco6509 [06-03-07@16:01:48]=20 > > > No SNMP data found for ifAdminStatNum on cisco6509=20 > > > [06-03-07@16:01:48] No SNMP data found for ifAlias on=20 > > > cisco6509 [06-03-07@16:01:48] Missing primary oid data for=20 > > > trans_regsub on ifAliasBox [06-03-07@16:01:48] Missing=20 > > > repeater data for trans_elapsed on=20 > > > ifAdminStatTxt > > > [06-03-07@16:01:48] Missing repeater data for trans_elapsed=20 > > > on ifOperStatTxt [06-03-07@16:01:48] Missing repeater data=20 > > > for ifName for if_stat msg [06-03-07@16:01:48] No SNMP data=20 > > > found for FanDescr on cisco6509 [06-03-07@16:01:48] No SNMP=20 > > > data found for FanState on cisco6509 [06-03-07@16:01:48]=20 > > > Missing repeater data for trans_elapsed on FanStatus=20 > > > [06-03-07@16:01:48] Missing repeater data for FanDescr for=20 > > > fans msg [06-03-07@16:01:48] No SNMP data found for ifName on=20 > > > cisco6509 [06-03-07@16:01:48] No SNMP data found for=20 > > > ifOutPktsSec on cisco6509 [06-03-07@16:01:48] No SNMP data=20 > > > found for ifAlias on cisco6509 [06-03-07@16:01:48] No SNMP=20 > > > data found for ifOutCollisions on cisco6509=20 > > > [06-03-07@16:01:48] Missing repeater data for trans_delta on=20 > > > ifOutCps [06-03-07@16:01:48] Missing primary oid data for=20 > > > trans_regsub on ifAliasBox > > >=20 > > > any idea as to what is wrong. Community and SNMP access is > > configured > > > and verified. > > >=20 > > > Best regards, Thomas > > >=20 > > >=20 > > > ------------------------------------------------------- > > > This SF.Net email is sponsored by xPML, a groundbreaking > > > scripting language that extends applications into web and=20 > > > mobile media. Attend the live webcast and join the prime=20 > > > developer group breaking into this new coding territory!=20 > > > = http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D110944&bid=3D241720& > > dat=3D121642 > > _______________________________________________ > > Devmon-support mailing list Dev...@li... > > https://lists.sourceforge.net/lists/listinfo/devmon-support > >=20 > >=20 > > ------------------------------------------------------- > > This SF.Net email is sponsored by xPML, a groundbreaking > > scripting language > > that extends applications into web and mobile media. Attend=20 > > the live webcast > > and join the prime developer group breaking into this new=20 > > coding territory! > > = http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 > > _______________________________________________ > > Devmon-support mailing list > > Dev...@li... > > https://lists.sourceforge.net/lists/listinfo/devmon-support > >=20 >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking=20 > scripting language > that extends applications into web and mobile media. Attend=20 > the live webcast > and join the prime developer group breaking into this new=20 > coding territory! > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 > _______________________________________________ > Devmon-support mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devmon-support >=20 |