Re: [Devmon] Starting problem

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Are you willing to share that netapp stuff when you're done?

Thanks

Dan

On 3/6/06, Whilding, Craig <Cra...@me...> wrote:
> Sounds like a good idea.
>
> Currently confused as ive copied the cisco if_col template for NetApp
> quotas, its showing fine but my thresholds don't appear to be picked up.
>
>
> qrPercentUsed is a percent taken from bytesused/bytestotalx100
>
> Threshold:
> qrPercentUsed : red : 80 : WARNING
>
> Message:
> TABLE:
> [otherbits]|{qrPercentUsed.color}{qrPercentUsed}{qrPercentUsed.errors}
>
> One of the quotas is at 82.59 % and isn't showing up.
>
> I don't know why it's not working the same as the network equipment,
> weird!
>
> Craig
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
> Schwimmer, Eric E *HS
> Sent: 06 March 2006 15:14
> To: dev...@li...
> Subject: RE: [Devmon] Starting problem
>
>
> Well, right now the results of any math calculations (via
> DELTA or MATH transforms) done by Devmon are rounded to two
> decimal places.  I might add a 'precision' tag or something
> similar to either or both of these operations to allow you to
> get more or less detail as needed.  Right now, if you have a
> snmp alias that has excessive numbers after the decimal place,
> you can lop them off by doing a MATH transform on the alias.
> So, if you have an alias {tooManyNumbers} with a value of
> 11.324125, this transform:
>
> {lessNumbers} : MATH : {tooManyNumbers}
>
> will round it down to 11.32 and store it in the "lessNumbers"
> alias.
>
> Actually, I just had a thought;  what about making the MATH
> and DELTA aliases not round at all, and then added a separate
> ROUND transform or somesuch that would allow people to round
> their values to whatever they liked?  That would probably be
> the easiest way of implementing a round transform, but it
> would also mean that all current templates would have to be
> updated, as their rounding would go away.
>
> -Eric Schwimmer
> Network Engineer
> UVA HSCS Network Engineering
>
> > -----Original Message-----
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf
> > Of Whilding, Craig
> > Sent: Monday, March 06, 2006 9:47 AM
> > To: dev...@li...
> > Subject: RE: [Devmon] Starting problem
> >
> > Oops, hadn't noticed the new version, have replaced the files and its
> > working fine now cheers.
> >
> > Just power, our cards don't have env abilities (I'm currently
> > monitoring
> > the Battery temp as a poor mans alternative).
> >
> > Ah thanks, ill use that switch to avoid having to put the dhcp test
> > under Windows PC defaults. The exceptions file will help me
> > get around a
> > problem I have with disabled ranges warning as they have no free
> > addresses.
> >
> > Im currently sorting my NetApp quota and vol templates and
> > was wondering
> > how I can display a number to 2dp for example.
> >
> > Thanks for the excellent work.
> >
> >
> > Craig
> >
> > -----Original Message-----
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf Of
> > Schwimmer, Eric E *HS
> > Sent: 06 March 2006 14:29
> > To: dev...@li...
> > Subject: RE: [Devmon] Starting problem
> >
> >
> > Regarding the 'ioctl' error; are you using the latest version
> > of Devmon?  Specifically, line 1964 of modules/dm_config.pm
> > should read:
> >
> > if(defined($pid =3D fork)) {
> >
> > as opposed to:
> >
> > if(my $pid =3D fork) {
> >
> >
> > As to the power templates; the 9609 templates work on the APC
> > 9617 card?  Both power and env?  If so, I'll copy them over
> > (and thanks for letting me know :)
> >
> > And autodiscovery of devices depends on their contents of
> > the SNMP SysDescr.0 string; which is matched against the
> > contents of the 'sysdesc' field in the model's specs file.
> > You can override autodetection, however, by using the
> > 'model' tag in the bb-hosts file;  please see the USING
> > document for further info (if it isnt in there, please
> > get the latest version of devmon).
> >
> > -Eric
> >
> > > -----Original Message-----
> > > From: dev...@li...
> > > [mailto:dev...@li...] On Behalf
> > > Of Whilding, Craig
> > > Sent: Monday, March 06, 2006 8:24 AM
> > > To: dev...@li...
> > > Subject: [Devmon] Starting problem
> > >
> > > Excellent hobbit enhancement which will get rid of quite a
> > > few Perl scripts when I've finished writing all the templates.
> > >
> > >
> > >
> > > I have been running it as a foreground process with the -f
> > > switch but without this I am also getting "Can't fork:
> > > Inappropriate ioctl for device" Forking to background process
> > > *****". This is on RHEL3 again.
> > >
> > >
> > >
> > > For APC UPS's you may want to copy the power stuff over to a
> > > model 9617 as this is what all my management card equipped
> > > UPS's show as so it might be a popular one (?). They are 3000
> > > and 5000 models.
> > >
> > >
> > >
> > > A problem I now have though is how devices are discovered as
> > > a certain type. I have a script that monitors free dhcp
> > > addresses on Windows boxes. If it just looks up model there
> > > Is nothing special about this box. Im not sure how I can get
> > > around this but I would need to put an exception in for all
> > > other windows boxes I monitor so it doesn't try to show dhcp
> > > free addresses for them.
> > >
> > >
> > >
> > > Keep up the good work though :-)
> > >
> > >
> > >
> > > Craig Whilding
> > >
> > >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by xPML, a groundbreaking scripting
> > language
> > that extends applications into web and mobile media. Attend the live
> > webcast
> > and join the prime developer group breaking into this new coding
> > territory!
> > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by xPML, a groundbreaking
> > scripting language
> > that extends applications into web and mobile media. Attend
> > the live webcast
> > and join the prime developer group breaking into this new
> > coding territory!
> > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> >
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting
> language
> that extends applications into web and mobile media. Attend the live
> webcast
> and join the prime developer group breaking into this new coding
> territory!
> http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting langua=
ge
> that extends applications into web and mobile media. Attend the live webc=
ast
> and join the prime developer group breaking into this new coding territor=
y!
> http://sel.as-us.falkag.net/sel?cmdlnk&kid=110944&bid$1720&dat=121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>

Re: [Devmon] Starting problem

SNMP poller for Xymon

Re: [Devmon] Starting problem