[Devmon] insane if_load causing infecting me with insanity!

[Dan V. M. <bi...@gm...>]

I've got devmon working fairly well, except I'm having some issues
with what appears to be just 7609/Cisco GSRs.

They are interconnected two each other via a 1gbps fibre link, and
their interfaces often go red with devmon, and show the following:

Gi2/2 [L3 conn to 7609-2]=091.00 Gbps=09green 99.71 Mbps (0.10%)=09red
323627.09 Tbps (323627088.71%)

Whoa! I'm not complaing about that much speed, but I'm pretty sure I
don't have it.

On a connection similiar to that one, it's perfectly reasonable:

Gi2/1 [iBGP Link to 7609-2t]=091.00 Gbps=09green 22.83 Mbps (0.02%)=09green
18.80 Mbps (0.02%)

(The percentages are off, but I can fix that.)

Then, I have a crazy OC12 Connection:

PO5/0 [Sprint OC12]=09622.00 Mbps=09green 307445.73 Tbps
(494285746.27%)=09green 32.70 Mbps (0.05%)

Wowzers!

Here's a perfectly sane OC12 below it:

PO6/0 [ATT OC12]=09622.00 Mbps=09green 171.85 Mbps (0.28%)=09green 99.28 Mb=
ps (0.16%)

So that leads me to believe that my setup/transforms/etc are fine, as
50% of them seem sane. Any hints on where I can look for issues?

Thanks

Dan