Re: [Devmon] Devmon not populating rrd file correctly

[Buchan M. <bg...@st...>]

I supplied a diff you should have been able to apply to the original messages 
file.

Here is the complete modified messages file:


{upsStatus.errors}
{upsBattStat.errors}
{upsLoadOut.errors}
{upsBattRep.errors}
{upsVoltageIn.errors}

UPS status:

Vendor:              apc
Model:               {upsModel}

UPS Status:          {upsOutStat}
Battery Status:      {upsBattStat}

Runtime Remaining:   {upsMinsRunTime}
                     - minutes (red={upsMinsRunTime.thresh:red}m)
Battery Capacity:    {upsBattCap}%
UPS Load:            {upsLoadOut}% (yellow={upsLoadOut.thresh:yellow}% 
red={upsLoadOut.thresh:red}%)

Voltage in:          {upsVoltageIn}
                     (yellow={upsVoltageIn.thresh:yellow}v 
red={upsVoltageIn.thresh:red}v)
Voltage out:         {upsVoltageOut}

Last failure due to: {upsFailCause}
Time on battery:     {upsSecsOnBatt}
                     - seconds


Regards,
Buchan

On Wednesday, 1 June 2011 18:00:33 Josh Luthman wrote:
> I put that information in the message file and now it is putting that on
> the Xymon page (
> http://172.16.0.114/xymon-cgi/svcstatus.sh?HOST=stouderapc&SERVICE=power )
> 
> Looks like this: http://i.imgur.com/dGAzY.png
> 
> It doesn't look like it's reading it correctly or I told it to do something
> wrong.
> 
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> 
> On Wed, Jun 1, 2011 at 10:46 AM, Buchan Milne 
<bg...@st...>wrote:
> > On Wednesday, 1 June 2011 16:30:44 Josh Luthman wrote:
> > > >No version of this template has had RRD support for the power test
> > 
> > (yet).
> > 
> > > If
> > > 
> > > >you have a temperature sensor, the 'temp' test should though.
> > > 
> > > I don't have a temp column, should I?  I get an answer for the first
> > > OID but the humidity is -1.
> > > 
> > > >This should not be necessary in 4.2.3 or later.
> > > 
> > > I'll remove it once everything is working, thanks for the tip.  I am
> > > running 4.3.2
> > > 
> > > > bb localhost 'hobbitdlog ups.power'
> > > 
> > > http://pastebin.com/DaySRCTe
> > 
> > No RRD "header" for the devmon collector.
> > 
> > > >rrdtool info /home/xymon/data/rrd/stouderapc/power.rrd
> > > 
> > > http://pastebin.com/2hjKyrXZ
> > 
> > Looks like this was collected by NCV, but the values following the "C"
> > are not
> > pure numeric. I would suggest you play with the formatting in the
> > messages file to ensure that lines with a colon are strictly:
> > 
> > Name : value
> > 
> > Something like this:
> > 
> > Index: templates/apc-9619/power/message
> > ===================================================================
> > --- templates/apc-9619/power/message    (revision 225)
> > +++ templates/apc-9619/power/message    (working copy)
> > @@ -12,12 +12,15 @@
> > 
> >  UPS Status:          {upsOutStat}
> >  Battery Status:      {upsBattStat}
> > 
> > -Runtime Remaining:   {upsMinsRunTime} minutes
> > (red={upsMinsRunTime.thresh:red}m)
> > +Runtime Remaining:   {upsMinsRunTime}
> > +                    - minutes (red={upsMinsRunTime.thresh:red}m)
> > 
> >  Battery Capacity:    {upsBattCap}%
> >  UPS Load:            {upsLoadOut}% (yellow={upsLoadOut.thresh:yellow}%
> > 
> > red={upsLoadOut.thresh:red}%)
> > 
> > -Voltage in:          {upsVoltageIn}v
> > (yellow={upsVoltageIn.thresh:yellow}v red={upsVoltageIn.thresh:red}v)
> > -Voltage out:         {upsVoltageOut}v
> > +Voltage in:          {upsVoltageIn}
> > +                     (yellow={upsVoltageIn.thresh:yellow}v
> > red={upsVoltageIn.thresh:red}v)
> > +Voltage out:         {upsVoltageOut}
> > 
> >  Last failure due to: {upsFailCause}
> > 
> > -Time on battery:     {upsSecsOnBatt} secs
> > +Time on battery:     {upsSecsOnBatt}
> > +                     - seconds
> > 
> > 
> > Regards,
> > Buchan