Re: [Devmon] Devmon not populating rrd file correctly

[Josh L. <jo...@im...>]

I put that information in the message file and now it is putting that on the
Xymon page (
http://172.16.0.114/xymon-cgi/svcstatus.sh?HOST=stouderapc&SERVICE=power )

Looks like this: http://i.imgur.com/dGAzY.png

It doesn't look like it's reading it correctly or I told it to do something
wrong.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Wed, Jun 1, 2011 at 10:46 AM, Buchan Milne <bg...@st...>wrote:

> On Wednesday, 1 June 2011 16:30:44 Josh Luthman wrote:
> > >No version of this template has had RRD support for the power test
> (yet).
> >
> > If
> >
> > >you have a temperature sensor, the 'temp' test should though.
> >
> > I don't have a temp column, should I?  I get an answer for the first OID
> > but the humidity is -1.
> >
> > >This should not be necessary in 4.2.3 or later.
> >
> > I'll remove it once everything is working, thanks for the tip.  I am
> > running 4.3.2
> >
> > > bb localhost 'hobbitdlog ups.power'
> >
> > http://pastebin.com/DaySRCTe
>
> No RRD "header" for the devmon collector.
>
> > >rrdtool info /home/xymon/data/rrd/stouderapc/power.rrd
> >
> > http://pastebin.com/2hjKyrXZ
>
> Looks like this was collected by NCV, but the values following the "C" are
> not
> pure numeric. I would suggest you play with the formatting in the messages
> file to ensure that lines with a colon are strictly:
>
> Name : value
>
> Something like this:
>
> Index: templates/apc-9619/power/message
> ===================================================================
> --- templates/apc-9619/power/message    (revision 225)
> +++ templates/apc-9619/power/message    (working copy)
> @@ -12,12 +12,15 @@
>  UPS Status:          {upsOutStat}
>  Battery Status:      {upsBattStat}
>
> -Runtime Remaining:   {upsMinsRunTime} minutes
> (red={upsMinsRunTime.thresh:red}m)
> +Runtime Remaining:   {upsMinsRunTime}
> +                    - minutes (red={upsMinsRunTime.thresh:red}m)
>  Battery Capacity:    {upsBattCap}%
>  UPS Load:            {upsLoadOut}% (yellow={upsLoadOut.thresh:yellow}%
> red={upsLoadOut.thresh:red}%)
>
> -Voltage in:          {upsVoltageIn}v (yellow={upsVoltageIn.thresh:yellow}v
> red={upsVoltageIn.thresh:red}v)
> -Voltage out:         {upsVoltageOut}v
> +Voltage in:          {upsVoltageIn}
> +                     (yellow={upsVoltageIn.thresh:yellow}v
> red={upsVoltageIn.thresh:red}v)
> +Voltage out:         {upsVoltageOut}
>
>  Last failure due to: {upsFailCause}
> -Time on battery:     {upsSecsOnBatt} secs
> +Time on battery:     {upsSecsOnBatt}
> +                     - seconds
>
>
> Regards,
> Buchan
>