[Devmon] Monitoring UPS

[Colin C. <col...@gm...>]

Hi all

I'm attempting to monitor a few UPS.  The UPS models I need to monitor include:
- APC Smart-UPS 1000 RM
- Powerware 9390
- Powerware 9130
- Powerware 9135
- Powerware 9125
- PowerShield PSCE10000

The Powerware 9390 and 9130 both look reasonable out of the box but
report that they have no battery packs attached.  I've checked both of
these and can confirm that they have multiple battery packs.  I'm
guessing this is a result of being detected as "ups/standard" rather
the correct Powerware model.  I figure I'll have to proper templates
for these models to get the battery info.

The Smart-UPS 1000 and Powerware 9135 return "No matching templates
for device" so I've started writing templates for these.  If I
manually edit /var/lib/devmon/hosts.db and edit the make model fields
I can get data up for the Smart UPS but it is not being automatically
detected.  I have the following as the spec file
cat /usr/share/devmon/templates/apc-sups-1000rm/specs
vendor  : apc
model   : Smart-UPS 1000 RM
snmpver : 1
sysdesc : Smart-UPS 1000 RM

I get this from
snmpwalk -v1 -c public ups 1.3.6.1.4.1.318.1.1.1.1.1.1.0
PowerNet-MIB::upsBasicIdentModel.0 = STRING: "Smart-UPS 1000 RM"

Could someone point me in the right direction?

Thanks

CC

-- 
RHCE#805007969328369