Re: [Devmon] devmon installation problem

[Johan S. <joh...@de...>]

Check that you don't have any spaces at the ends of the vendor and model lines in the specs file

-----Original Message-----
From: Roland Soderstrom [mailto:ro...@lo...] 
Sent: den 16 februari 2011 21:29
Cc: dev...@li...
Subject: Re: [Devmon] devmon installation problem

Hi,

Thanks for the point, didn't think about that.
As I said I've been trying a lot of specs/bb-hosts combinations.

Now I've changed bb-hosts to:
192.168.34.254 server001 # DEVMON:model(compaq;server) and specs to.
vendor : compaq
model : server
snmpver : 2
sysdesc : Linux

All I get is this...

[11-02-17@07:11:41] Checking if  # DEVMON:model(compaq;server) matches NET:.
[11-02-17@07:11:41] Unknown model in model() option for server001

Do I need to add the model somewhere else?
Haven't changed anything else in my devmon setup more than devmon.cfg

As of now my requirements are really low.
The only thing I would like to accomplish is to get a SNMP status from
server001
I only want to see if the SNMP daemon is running on server001, and get that logged on xymon.
There is no xymon client running on server001, and xymon can't run there (it's an appliance)

- Roland

On 16/02/11 06:54 PM, Buchan Milne wrote:
> On Wednesday, 16 February 2011 05:26:32 Roland Soderstrom wrote:
>> Hi,
>>
>> Can't get this working, it seems ok but wont match my bb-hosts entry 
>> against my specs file.
>> Xymon 4.3.0.0beta2 on Solaris 10, devmon
>>
>> jupiter # /usr/local/devmon/devmon --help Devmon v0.3.1-beta1, a 
>> device monitor for BigBrother/Hobbit jupiter # grep -v '^#' 
>> devmon.cfg |grep -v '^$'
>> MULTINODE=NO
>> BBHOSTS=/usr/local/xymon/server/etc/bb-hosts
>> BBTAG=DEVMON
>> SNMPCIDS=mycommunity
>> NODENAME=HOSTNAME
>> PIDFILE=/var/run/devmon/devmon.pid
>> LOGFILE=/var/log/devmon.log
>> DBHOST=localhost
>> DBNAME=devmon
>> DBUSER=devmon
>> DBPASS=devmon
>> BBTYPE=hobbit
>> DISPSERV=localhost
>> DISPPORT=1985
>> MSGSIZE=8096
>> MSGSLEEP=10
>> CYCLETIME=60
>> DEADTIME=180
>> CLEARTIME=180
>> NUMFORKS=10
>> MAXPOLLTIME=30
>> SNMPTIMEOUT=2
>> SNMPTRIES=5
>> jupiter # find templates/ -ls
>> 416978    2 drwxr-xr-x   3 root     root            3 Feb 16 13:10
>> templates/
>> 414263    2 drwxr-xr-x   2 root     root            3 Feb 15 15:35
>> templates/HP-DL360
>> 414289    1 -rw-r--r--   1 root     root          117 Feb 16 13:18
>> templates/HP-DL360/specs
>> jupiter # cat templates/HP-DL360/specs vendor : HP model : DL360 
>> snmpver : 2 sysdesc : Linux ipndfw 2.4.21-21cpsmp #1 SMP Thu Sep 11 
>> 17:01:25 IDT
>> 2008 i686
> This is not a future-proof solution. Your next kernel update will mess 
> this up. A non-HP server running the same kernel would also match.
>
> Devices where the sysdesc is device specific do not have any real 
> problems with matching templates.
>
> In this case, you may want to specify the model in the bb-hosts file, e.g.:
>
> 192.168.34.254 server001 # DEVMON:model(compaq;server)
>
> Regards,
> Buchan

------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support