Menu
▾
▴
[Devmon] Missing repeater data for primary OID
|
From: Vernon E. <eve...@gm...> - 2010-07-15 09:15:33
|
Hi all
Devmon was working happily, retreiving data, when it just stopped.
All of my new template tests went white, with this error message - Missing
repeater data for primary OID
(In fairness, I only have one device, and all the tests are new ones I am
busy working on)
snmpget and snmpwalk from command line are still working fine.
The devmon --readbbhosts command finds my device.
And my one test, with this oid file, finds the system description.
sysDescr : .1.3.6.1.2.1.1.1.0 : leaf
sysObjectID : .1.3.6.1.2.1.1.2.0 : leaf
sysUpTime : .1.3.6.1.2.1.1.3.0 : leaf
sysContact : .1.3.6.1.2.1.1.4.0 : leaf
sysName : .1.3.6.1.2.1.1.5.0 : leaf
sysLocation : .1.3.6.1.2.1.1.6.0 : leaf
ipAddress : .1.3.6.1.4.1.1588.2.1.1.1.1.25.0 : leaf
netMask : .1.3.6.1.4.1.1588.2.1.1.1.1.26.0 : leaf
swSerial : .3.6.1.4.1.1588.2.1.1.1.1.10.0 : leaf
The rest return "Unknown"
The logs simply show lots of "No SNMP data found for blah on device"
So I tried debug mode.
The only bit that looks significant, is this
--- snip ---
[10-07-15@16:30:11] DEBUG TEMPLATES: read cisco:3750:power template
[10-07-15@16:30:11] DEBUG TEMPLATES: read cisco:3750:if_col template
[10-07-15@16:30:11] DEBUG TEMPLATES: read cisco:3750:serial template
[10-07-15@16:30:11] DEBUG TEMPLATES: read cisco:3750:if_err template
[10-07-15@16:30:11] DEBUG TEMPLATES: running post_template_load()
[10-07-15@16:30:12] DEBUG CFG: running read_hosts
[10-07-15@16:30:12] DEBUG SNMP: running poll_devices()
[10-07-15@16:30:12] DEBUG SNMP: 9
[10-07-15@16:30:12] DEBUG SNMP: 0 => 1.3.6.1.2.1.1.1.0
[10-07-15@16:30:12] DEBUG SNMP: 1 => 3.6.1.4.1.1588.2.1.1.1.1.10.0
[10-07-15@16:30:12] DEBUG SNMP: 2 => 1.3.6.1.2.1.1.2.0
[10-07-15@16:30:12] DEBUG SNMP: 3 => 1.3.6.1.2.1.1.4.0
[10-07-15@16:30:12] DEBUG SNMP: 4 => 1.3.6.1.2.1.1.6.0
[10-07-15@16:30:12] DEBUG SNMP: 5 => 1.3.6.1.2.1.1.5.0
[10-07-15@16:30:12] DEBUG SNMP: 6 => 1.3.6.1.4.1.1588.2.1.1.1.1.26.0
[10-07-15@16:30:12] DEBUG SNMP: 7 => 1.3.6.1.4.1.1588.2.1.1.1.1.25.0
[10-07-15@16:30:12] DEBUG SNMP: 8 => 1.3.6.1.2.1.1.3.0
[10-07-15@16:30:12] DEBUG SNMP: Adding ID => 1 OID =>1.3.6.1.2.1.1.1.0
[10-07-15@16:30:12] DEBUG SNMP: Pooling 1 oids
[10-07-15@16:30:12] DEBUG SNMP: Adding ID => 1 OID
=>3.6.1.4.1.1588.2.1.1.1.1.10.0
[10-07-15@16:30:12] DEBUG SNMP: Pooling 1 oids
Use of uninitialized value in join or string at
/opt/local/devmon/modules/BER.pm line 293, <$__ANONIO__> line 9.
SNMP Error:
no response received
SNMPv2c_Session (remote host: "172.21.202.10" [172.21.202.10].161)
community: "public"
request ID: 1204703964
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /opt/local/devmon/modules/dm_snmp.pm line 493
[10-07-15@16:30:22] DEBUG SNMP: Dethawing data for ssanppfs01
[10-07-15@16:30:22] SNMP: Queried ssanppfs01: expected 67, received 1
[10-07-15@16:30:22] DEBUG TESTS: running tests()
[10-07-15@16:30:22] No SNMP data found for ifLinkStatus on ssanppfs01
[10-07-15@16:30:22] No SNMP data found for ifTxFrames on ssanppfs01
[10-07-15@16:30:22] No SNMP data found for ifRxFrames on ssanppfs01
[10-07-15@16:30:22] No SNMP data found for ifIdx on ssanppfs01
[10-07-15@16:30:22] No SNMP data found for ifAdmStatus on ssanppfs01
--- snip ---
Any clues or pointers on what's going wrong or where to look greatly
appreciated.
Regards
Vernon
|
