Re: [Devmon] poweredge template

[Buchan M. <bg...@st...>]

On Wednesday, 19 May 2010 10:19:01 Martin Flemming wrote:
> Thanks for responds ..
> 
> On Wed, 19 May 2010, Buchan Milne wrote:
> > On Wednesday, 19 May 2010 08:59:47 mar...@de... wrote:
> >> Hi !
> >>
> >> I  use the dell-poweredge-template for monitoring ,
> >> and the temp- and raid-test are working well,
> >> but for fans and power i've got following error
> >>
> >> fans:
> >> Missing repeater data for primary OID coolingDeviceIndex
> >>
> >> Power supplies:
> >> clear Missing repeater data for primary OID powerSupplyIndex
> >>
> >>
> >> Devmon version 0.3.1-beta1 running
> >>
> >> But they will recognize with  snmptranslate
> >>
> >> snmptranslate -m +MIB-Dell-10892 -IR -On powerSupplyStatus
> >> .1.3.6.1.4.1.674.10892.1.600.12.1.5
> >> snmptranslate -m +MIB-Dell-10892 -IR -On coolingDeviceStatus
> >> .1.3.6.1.4.1.674.10892.1.700.12.1.5
> >
> > This just indicates that you have the MIB file, and the MIB file has OIDs
> > for powerSupplyStatus.
> >
> > It does not show whether there is any data available on your host for
> > these OIDs.
> >
> > Have you tried snmpwalk? E.g.:
> >
> > snmpwalk -v2c -c public ip.add.re.ss 1.3.6.1.4.1.674.10892.1.600.12.1.5
> 
> Ok course :-)
> 
> snmpwalk -v2c -c secret hostname 1.3.6.1.4.1.674.10892.1.600.12
> Cannot find module (BASEBRDD_MIB-MIB): At line 0 in (none)
> MIB-Dell-10892::powerSupplyTable = No Such Object available on this agent
>  at this OID
> 

So, no data for this test (which is to validate whether both power supplies 
are working ...).

> Does that mean, that my machine send no data for powerSupply ?

Yes. You may want to disable this test (by listing all the other tests for 
this template that do apply in the tests option for the DEVMON tag in bb-
hosts).


> .. but only for powerUsage

While it may be worthwhile adding, I was more concerned about whether a power 
supply needed to be replaced or not ...

> 
> snmpwalk -v2c -c public wof-webserv2 1.3.6.1.4.1.674.10892.1.600|grep power
> Cannot find module (BASEBRDD_MIB-MIB): At line 0 in (none)
> MIB-Dell-10892::powerUsageChassisIndex.1.1 = INTEGER: 1
> MIB-Dell-10892::powerUsageIndex.1.1 = INTEGER: 1
> MIB-Dell-10892::powerUsageStateCapabilities.1.1 = INTEGER: 0
> MIB-Dell-10892::powerUsageStateSettings.1.1 = INTEGER: enabled(2)
> MIB-Dell-10892::powerUsageStatus.1.1 = INTEGER: ok(3)
> MIB-Dell-10892::powerUsageEntityName.1.1 = STRING: "System power
>  consumption data" MIB-Dell-10892::powerUsageCumulativeWattage.1.1 =
>  INTEGER: 167876
> 
> and what does that means ?
> 
> Cannot find module (BASEBRDD_MIB-MIB): At line 0 in (none)
> 
> The mib sholud be present
> 
> grep BASEBRDD_MIB-MIB /usr/share/snmp/mibs/*
> /usr/share/snmp/mibs/dellserv.mib:BASEBRDD_MIB-MIB DEFINITIONS ::= BEGIN

Not sure, seems like a problem with the MIB, or your MIBLIST, or something 
else. This is one for the dell list.

> > Check all the OIDs for any tests that are clear, devmon (currently) gives
> > up if one "walk" fails, so some tests may be clear, even though there is
> > data for it, because other data was not available.
> 
> Is that rather a target problem (maybe asking on the linux-poweredge-list,
> how i can get this informations for powerSupply?) or my devmon/snmp Server
> configuration-problem ?

The hardware may not support this, the information may be somewhere else etc., 
but it is not a problem with your devmon server. It could be that a new 
template should be created. I don't currently have any Dell PowerEdge servers 
on which to test this template, and the ones I did use before were quite old 
at the time (6650, 8450, 1750, 2650).

Regards,
Buchan