Re: [Devmon] CISCO 4948 & 2800

[Mario V. <mar...@gm...>]

Hi again,

Just to send a quick update in case someone looks at this thread in the
future.

The devmon monitoring is now working on my CISCO 4948, oddly enough using
the CISCO-4500 templates from
http://devmon.svn.sourceforge.net/viewvc/devmon/trunk/templates/ (I tried to
modify the 6509 template to get it working).

I'm not really sure why it wasn't working before, but after my monitoring
system needed a reload it picked up the device with no problems.  defintely
using the 4500 template as I had removed the 650x from the tree temporarily.


Thanks for the help.

Mario



On 28 April 2010 10:31, Mario Valetti <mar...@gm...> wrote:

> Hi Buchan,
>
> I just wanted to check if you had found the time to commit your 4948
> template?  No rush, I'd like to make sure I hadn't missed it.
>
>
> Separately, do you (or anyone else) know what is different about the SNMP
> on the 4948's?  I've tried using MRTG as well to graph the bandwidth useage
> on this device but it's giving me problems too, whereas it works fine on the
> other platforms I have.
>
>
> Regards,
> Mario
>
>  On 7 April 2010 15:42, Buchan Milne <bg...@st...> wrote:
>
>> On Wednesday, 7 April 2010 13:21:52 Mario Valetti wrote:
>> > Hi I'm having two separate issues getting DEVMON to work correctly with
>> two
>> > router/switch models.
>> >
>> > The first is a CISCO 4948,  I have no particular template for it,
>> however I
>> > believe it should pickup and work with the CISCO-4500 template.  Has
>> anyone
>> > got a specific template for the CISCO 4948 series?
>> >
>> > The errors are:
>> >
>> > No SNMP data found for ifInDiscards on <hostname>
>> > [10-04-07@12:46:55] No SNMP data found for ifOutOctets on <hostname>
>> > [10-04-07@12:46:55] No SNMP data found for ifName on <hostname>
>> > [10-04-07@12:46:55] No SNMP data found for ifOutDiscards on <hostname>
>> > [10-04-07@12:46:55] No SNMP data found for ifInOctets on <hostname>
>> > [10-04-07@12:46:55] No SNMP data found for ifAlias on <hostname>
>> > [10-04-07@12:46:55] Missing repeater data for ifName for if_dsc msg
>> >
>> > In XYMON, the columns flash purple with the "Missing Repeater Value"
>> > message.
>> >
>> >
>> > Does this mean I need to try create a template specific for the 4948?
>>
>> The 4500 template may not have been the best place to start. I have a 4948
>> template, I will try and commit it soon. I think I actually started this
>> one
>> from 6509 template.
>>
>>
>> > The second is a set of CISCO 2800's.
>>
>> 2801 or 2811?
>>
>> >
>> > The Values seem to appear fine within XYMON, and DEVMON is green with
>> > figures updating.  However, no graphs are drawn in neither of the
>> columns.
>> > No devmon graph files exist under the ~/data/rrd/<hostname> directory.
>> > Directory and file permissions are the same as other switches and
>> routers
>> > which work fine.
>> >
>> > I haven't been able to work out what I'm missing.
>>
>> I think the 2800 template may be missing the rrd option to the TABLE line
>> in
>> the messages file. Compare with e.g. 7206 or 6509 template.
>>
>> I have a template for whichever of 2801 or 2811 was missing, but I added a
>> vpn
>> test, since we are mostly using them as site-to-site VPNs.
>>
>> > Of the two, the 4948 is more important to me.
>>
>> Regards,
>> Buchan
>>
>
>