Menu
▾
▴
devmon-support
|
From: Meserole, K. W. <km...@ke...> - 2008-05-13 10:19:50
|
Hi, I have been running Devmon 0.3.0-beta for some time without issues. While trying to upgrade to the 0.3.0 release it goes through the entire cycle and at the end dies with the following lines from devmon.log. Any thoughts? [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling xxxxxxxxx [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling xxxxxxxxx [08-05-12@13:06:56] Error spawning snmp worker fork (Not enough space) [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx [08-05-12@13:07:32] Shutting down |
|
From: Taylor, R. <Rob...@He...> - 2008-05-13 23:52:57
|
I don't see that happening on mine, but what I do see is that it appears to stop sending data to Hobbit after about one day. There are still running Devmon processes, but no data flows to Hobbit. I have to kill the processes and restart them to get things working again. Robert From: dev...@li... [mailto:dev...@li...] On Behalf Of Meserole, Keith W. Sent: Tuesday, May 13, 2008 6:19 AM To: dev...@li... Subject: [Devmon] Devmon shuts down Hi, I have been running Devmon 0.3.0-beta for some time without issues. While trying to upgrade to the 0.3.0 release it goes through the entire cycle and at the end dies with the following lines from devmon.log. Any thoughts? [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling xxxxxxxxx [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling xxxxxxxxx [08-05-12@13:06:56] Error spawning snmp worker fork (Not enough space) [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx [08-05-12@13:07:32] Shutting down |
|
From: <mat...@sy...> - 2008-05-14 08:25:37
|
Hi! I use the logrotate to restart the devmon daemon... Works OK for me... /Mathias \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ Mathias Carlsson SYSteam Datakonsult i Anderstorp AB Stötabogatan 1 Box 183 334 24 ANDERSTORP Tel: +46 (0)371 588529 Mobil: +46 (0)70 3708529 Detta meddelande innehåller information som kan vara av sekretesskaraktär eller på annat sätt hemlig och ägs av SYSteam Datakonsult i Anderstorp AB. Meddelandet är endast avsedd för personen till vilken den är adresserad. Om du inte är den avsedda mottagaren, har du ej tillåtelse att läsa, skriva, spara, kopiera, distribuera eller använda meddelandet eller del av meddelandet. Om du mottar meddelandet av misstag, var vänlig och meddela avsändaren omgående samt ta bort meddelandet och alla kopior av detsamma. http://www.systeam.se/anderstorp "Taylor, Robert" <Robert.Taylor@He ndrickAuto.com> To Sent by: "dev...@li...urceforge.n devmon-support-bo et" un...@li...urc <dev...@li...urceforge.n eforge.net et> cc 2008-05-14 01:53 Subject Re: [Devmon] Devmon shuts down Please respond to devmon-support@li sts.sourceforge.n et I don’t see that happening on mine, but what I do see is that it appears to stop sending data to Hobbit after about one day. There are still running Devmon processes, but no data flows to Hobbit. I have to kill the processes and restart them to get things working again. Robert From: dev...@li... [ mailto:dev...@li...] On Behalf Of Meserole, Keith W. Sent: Tuesday, May 13, 2008 6:19 AM To: dev...@li... Subject: [Devmon] Devmon shuts down Hi, I have been running Devmon 0.3.0-beta for some time without issues. While trying to upgrade to the 0.3.0 release it goes through the entire cycle and at the end dies with the following lines from devmon.log. Any thoughts? [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling xxxxxxxxx [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling xxxxxxxxx [08-05-12@13:06:56] Error spawning snmp worker fork (Not enough space) [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx [08-05-12@13:07:32] Shutting down ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Devmon-support mailing list Dev...@li... https://lists.sourceforge.net/lists/listinfo/devmon-support |
|
From: Kauffman, T. <Kau...@ni...> - 2008-05-16 18:57:53
|
I have a number of Cisco 3500 and 3550 switches; the 3550s are handled with no problem, but the 3500s give me errors. Where do I look next to fix this? TIA Tom Kauffman >From the log: [08-05-16@14:22:50] No SNMP data found for ifInDiscards on whqswl15 [08-05-16@14:22:50] No SNMP data found for ifOutOctets on whqswl15 [08-05-16@14:22:50] No SNMP data found for entPhysicalSerialNum on whqswl15 [08-05-16@14:22:50] No SNMP data found for entPhysicalHardwareRev on whqswl15 [08-05-16@14:22:50] No SNMP data found for entPhysicalSoftwareRev on whqswl15 [08-05-16@14:22:50] No SNMP data found for entPhysicalDescr on whqswl15 [08-05-16@14:22:50] No SNMP data found for entPhysicalModelName on whqswl15 [08-05-16@14:22:50] No SNMP data found for entPhysicalFirmwareRev on whqswl15 [08-05-16@14:22:50] Missing repeater data for entPhysicalDescr for serial msg [08-05-16@14:22:50] No SNMP data found for ifInErrors on whqswl15 [08-05-16@14:22:50] No SNMP data found for ifInDiscards on whqswl51 [08-05-16@14:22:50] No SNMP data found for ifOutOctets on whqswl51 [08-05-16@14:22:50] No SNMP data found for entPhysicalSerialNum on whqswl51 [08-05-16@14:22:50] No SNMP data found for entPhysicalHardwareRev on whqswl51 [08-05-16@14:22:50] No SNMP data found for entPhysicalSoftwareRev on whqswl51 [08-05-16@14:22:50] No SNMP data found for entPhysicalDescr on whqswl51 [08-05-16@14:22:50] No SNMP data found for entPhysicalModelName on whqswl51 [08-05-16@14:22:50] No SNMP data found for entPhysicalFirmwareRev on whqswl51 [08-05-16@14:22:50] Missing repeater data for entPhysicalDescr for serial msg [08-05-16@14:22:50] No SNMP data found for ifInErrors on whqswl51 Running debug shows about the same: [08-05-16@14:03:27] No SNMP data found for ifInDiscards on whqswl15 [08-05-16@14:03:27] No SNMP data found for ifOutOctets on whqswl15 [08-05-16@14:03:27] Undefined value for ifInDiscards in test if_dsc on whqswl15, ignoring row for Fa0/1 [08-05-16@14:03:27] Undefined value for ifInDiscards in test if_dsc on whqswl15, ignoring row for Fa0/2 But if I run snmpwalk -- SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System Software IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA RE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Fri 15-Feb-02 10:51 by antonino IF-MIB::ifInDiscards.10 = Counter32: 0 IF-MIB::ifInDiscards.11 = Counter32: 0 IF-MIB::ifInDiscards.12 = Counter32: 151580003 IF-MIB::ifOutOctets.1 = Counter32: 1981655528 IF-MIB::ifOutOctets.2 = Counter32: 236813861 IF-MIB::ifOutOctets.3 = Counter32: 3928789782 CONFIDENTIALITY NOTICE: This email and any attachments are for the exclusive and confidential use of the intended recipient. If you are not the intended recipient, please do not read, distribute or take action in reliance upon this message. If you have received this in error, please notify us immediately by return email and promptly delete this message and its attachments from your computer system. We do not waive attorney-client or work product privilege by the transmission of this message. |
|
From: Kauffman, T. <Kau...@ni...> - 2008-05-16 19:10:39
Attachments:
brocade.tar
|
Here's my take on templates for the Brocade switches -- this is working on IBM's rebranded switches -- the Brocade 3100, 3900, 4100, and 5000. Tom Kauffman NIBCO, Inc. CONFIDENTIALITY NOTICE: This email and any attachments are for the exclusive and confidential use of the intended recipient. If you are not the intended recipient, please do not read, distribute or take action in reliance upon this message. If you have received this in error, please notify us immediately by return email and promptly delete this message and its attachments from your computer system. We do not waive attorney-client or work product privilege by the transmission of this message. |
|
From: Robert H. <rob...@gm...> - 2008-05-16 20:25:42
|
Try updating the version of IOS that you are running on those switches. I see they are from 2002. We had similar issues with our switches that were resolved with a simple IOS upgrade. On Fri, May 16, 2008 at 11:54 AM, Kauffman, Tom <Kau...@ni...> wrote: > I have a number of Cisco 3500 and 3550 switches; the 3550s are handled with > no problem, but the 3500s give me errors. Where do I look next to fix this? > > But if I run snmpwalk -- > SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System > Software > IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version *12.0(5)WC3b*, > RELEASE SOFTWA > RE (fc1) > Copyright (c) 1986-*2002* by cisco Systems, Inc. > Compiled Fri *15-Feb-02* 10:51 by antonino > |
|
From: Kauffman, T. <Kau...@ni...> - 2008-05-22 13:56:50
|
These are old devices, most in inconvenient parts of the country. My network people tell me that many don't have enough memory to keep the old IOS available through an upgrade, so if something craps out we end up with a dead switch. They're on schedule for replacement early next year. I'm more interested in why devmon doesn't get anything but cricket 1.05 seems to have no problem. (I know; "look at the source"; trust me, if I could figure out how cricket works, I wouldn't be replacing it!) For now it looks like I'll continue with cricket on the old devices. Thanks - Tom Kauffman ________________________________ From: dev...@li... [mailto:dev...@li...] On Behalf Of Robert Holden Sent: Friday, May 16, 2008 4:26 PM To: dev...@li... Subject: Re: [Devmon] Not getting data for Cisco 3500 switches Try updating the version of IOS that you are running on those switches. I see they are from 2002. We had similar issues with our switches that were resolved with a simple IOS upgrade. On Fri, May 16, 2008 at 11:54 AM, Kauffman, Tom <Kau...@ni...<mailto:Kau...@ni...>> wrote: I have a number of Cisco 3500 and 3550 switches; the 3550s are handled with no problem, but the 3500s give me errors. Where do I look next to fix this? But if I run snmpwalk -- SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System Software IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA RE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Fri 15-Feb-02 10:51 by antonino CONFIDENTIALITY NOTICE: This email and any attachments are for the exclusive and confidential use of the intended recipient. If you are not the intended recipient, please do not read, distribute or take action in reliance upon this message. If you have received this in error, please notify us immediately by return email and promptly delete this message and its attachments from your computer system. We do not waive attorney-client or work product privilege by the transmission of this message. |
|
From: Robert H. <rob...@gm...> - 2008-05-22 16:02:11
|
Couple of thoughts ... First, are all your tests failing, or just specific ones? When we were running the old IOS, I only a couple of tests were failing: serial & if_dsc The more basic tests should work (if_stat, cpu, if_load, others?) Here is some info on our IOS update: I was able to do the upgrade with out removing the old image. The step that made the biggest difference was removing the html directory contents off the switch. That took up 1/2 of the flash. (I believe) this directory is only used if you have the http server enabled on the switch. I followed the directions below, except I did not remove the old .bin (IOS): http://www.cisco.com/warp/public/473/36.shtml Here is some info off our switches, notice our old IOS is still in flash Looks like we have 16MB: IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Tue 13-Feb-07 15:04 by antonino Image text-base: 0x00003000, data-base: 0x00352924 System image file is "flash:c3500xl-c3h2s-mz.120-5.WC17.bin" cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory. Directory of flash:/ 2 -rwx 1749748 Apr 30 2001 14:54:49 c3500XL-c3h2s-mz-120-5.3.WC.1.bin 4 drwx 0 Apr 12 2008 04:18:03 html 5 -rwx 8938 Apr 12 2008 04:21:58 config.text 165 -rwx 25 Jul 16 2007 23:36:05 snmpengineid 166 -rwx 1260 Feb 18 2005 01:28:26 vlan.dat 6 -rwx 1811552 Apr 12 2008 04:20:56 c3500xl-c3h2s-mz.120-5.WC17.bin 7 -rwx 315 Apr 12 2008 04:21:27 env_vars Hope this helps, Robert On Thu, May 22, 2008 at 6:48 AM, Kauffman, Tom <Kau...@ni...> wrote: > These are old devices, most in inconvenient parts of the country. My > network people tell me that many don't have enough memory to keep the old > IOS available through an upgrade, so if something craps out we end up with a > dead switch. They're on schedule for replacement early next year. > > > > I'm more interested in why devmon doesn't get anything but cricket 1.05 > seems to have no problem. (I know; "look at the source"; trust me, if I > could figure out how cricket works, I wouldn't be replacing it!) > > > > For now it looks like I'll continue with cricket on the old devices. > > > > Thanks – > > > > Tom Kauffman > > > ------------------------------ > > *From:* dev...@li... [mailto: > dev...@li...] *On Behalf Of *Robert Holden > *Sent:* Friday, May 16, 2008 4:26 PM > *To:* dev...@li... > *Subject:* Re: [Devmon] Not getting data for Cisco 3500 switches > > > > Try updating the version of IOS that you are running on those switches. I > see they are from 2002. We had similar issues with our switches that were > resolved with a simple IOS upgrade. > > On Fri, May 16, 2008 at 11:54 AM, Kauffman, Tom <Kau...@ni...> > wrote: > > I have a number of Cisco 3500 and 3550 switches; the 3550s are handled with > no problem, but the 3500s give me errors. Where do I look next to fix this? > > But if I run snmpwalk -- > SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System > Software > IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version *12.0(5)WC3b*, > RELEASE SOFTWA > RE (fc1) > Copyright (c) 1986-*2002* by cisco Systems, Inc. > Compiled Fri *15-Feb-02* 10:51 by antonino > > > > CONFIDENTIALITY NOTICE: This email and any attachments are for the > exclusive and confidential use of the intended recipient. If you are not > the intended recipient, please do not read, distribute or take action in > reliance upon this message. If you have received this in error, please > notify us immediately by return email and promptly delete this message > and its attachments from your computer system. We do not waive > attorney-client or work product privilege by the transmission of this > message. > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Devmon-support mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devmon-support > > |
|
From: Kauffman, T. <Kau...@ni...> - 2008-05-22 18:09:58
|
Pretty much everything fails. I just ran the -debug with 6 (6!) 'v's - previously I only used 4 - and I now see what's going on: [08-05-22@13:30:30] ERROR: Error walking 1.3.6.1.4.1.9.9.13.1.4.1.3 for gos-cisco2950-2 () [08-05-22@13:30:30] ERROR: Error walking 1.3.6.1.2.1.47.1.1.1.1.13 for gos-cisco2950-2 () [08-05-22@13:30:30] ERROR: Failed too many queries on gos-cisco2950-2, aborting query [08-05-22@13:30:30] ERROR: Error walking 1.3.6.1.2.1.47.1.1.1.1.11 for gos-cisco2950-2 () Two of these oids are in 'serial' - and by running all tests except 'serial' I'm now getting values. The problem was the 'failed too many queries'. I now see two features that would be nice for devmon: 1) the ability to exclude specific tests for a device, and 2) the ability to set a different query failure threshold. I'll let this bake until next week, and the I think I can drop cricket. Thanks for the help! Tom ________________________________ From: dev...@li... [mailto:dev...@li...] On Behalf Of Robert Holden Sent: Thursday, May 22, 2008 11:48 AM To: dev...@li... Subject: Re: [Devmon] Not getting data for Cisco 3500 switches Couple of thoughts ... First, are all your tests failing, or just specific ones? When we were running the old IOS, I only a couple of tests were failing: serial & if_dsc The more basic tests should work (if_stat, cpu, if_load, others?) Here is some info on our IOS update: I was able to do the upgrade with out removing the old image. The step that made the biggest difference was removing the html directory contents off the switch. That took up 1/2 of the flash. (I believe) this directory is only used if you have the http server enabled on the switch. I followed the directions below, except I did not remove the old .bin (IOS): http://www.cisco.com/warp/public/473/36.shtml Here is some info off our switches, notice our old IOS is still in flash Looks like we have 16MB: IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Tue 13-Feb-07 15:04 by antonino Image text-base: 0x00003000, data-base: 0x00352924 System image file is "flash:c3500xl-c3h2s-mz.120-5.WC17.bin" cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory. Directory of flash:/ 2 -rwx 1749748 Apr 30 2001 14:54:49 c3500XL-c3h2s-mz-120-5.3.WC.1.bin 4 drwx 0 Apr 12 2008 04:18:03 html 5 -rwx 8938 Apr 12 2008 04:21:58 config.text 165 -rwx 25 Jul 16 2007 23:36:05 snmpengineid 166 -rwx 1260 Feb 18 2005 01:28:26 vlan.dat 6 -rwx 1811552 Apr 12 2008 04:20:56 c3500xl-c3h2s-mz.120-5.WC17.bin 7 -rwx 315 Apr 12 2008 04:21:27 env_vars Hope this helps, Robert On Thu, May 22, 2008 at 6:48 AM, Kauffman, Tom <Kau...@ni...<mailto:Kau...@ni...>> wrote: These are old devices, most in inconvenient parts of the country. My network people tell me that many don't have enough memory to keep the old IOS available through an upgrade, so if something craps out we end up with a dead switch. They're on schedule for replacement early next year. I'm more interested in why devmon doesn't get anything but cricket 1.05 seems to have no problem. (I know; "look at the source"; trust me, if I could figure out how cricket works, I wouldn't be replacing it!) For now it looks like I'll continue with cricket on the old devices. Thanks - Tom Kauffman ________________________________ From: dev...@li...<mailto:dev...@li...> [mailto:dev...@li...<mailto:dev...@li...>] On Behalf Of Robert Holden Sent: Friday, May 16, 2008 4:26 PM To: dev...@li...<mailto:dev...@li...> Subject: Re: [Devmon] Not getting data for Cisco 3500 switches Try updating the version of IOS that you are running on those switches. I see they are from 2002. We had similar issues with our switches that were resolved with a simple IOS upgrade. On Fri, May 16, 2008 at 11:54 AM, Kauffman, Tom <Kau...@ni...<mailto:Kau...@ni...>> wrote: I have a number of Cisco 3500 and 3550 switches; the 3550s are handled with no problem, but the 3500s give me errors. Where do I look next to fix this? But if I run snmpwalk -- SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System Software IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA RE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Fri 15-Feb-02 10:51 by antonino CONFIDENTIALITY NOTICE: This email and any attachments are for the exclusive and confidential use of the intended recipient. If you are not the intended recipient, please do not read, distribute or take action in reliance upon this message. If you have received this in error, please notify us immediately by return email and promptly delete this message and its attachments from your computer system. We do not waive attorney-client or work product privilege by the transmission of this message. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Devmon-support mailing list Dev...@li...<mailto:Dev...@li...> https://lists.sourceforge.net/lists/listinfo/devmon-support CONFIDENTIALITY NOTICE: This email and any attachments are for the exclusive and confidential use of the intended recipient. If you are not the intended recipient, please do not read, distribute or take action in reliance upon this message. If you have received this in error, please notify us immediately by return email and promptly delete this message and its attachments from your computer system. We do not waive attorney-client or work product privilege by the transmission of this message. |
|
From: Buchan M. <bg...@st...> - 2008-05-28 12:54:01
|
On Thu, 2008-05-22 at 14:06 -0400, Kauffman, Tom wrote: > Pretty much everything fails. > > > > I just ran the –debug with 6 (6!) ‘v’s – previously I only used 4 – > and I now see what’s going on: > > > > [08-05-22@13:30:30] ERROR: Error walking 1.3.6.1.4.1.9.9.13.1.4.1.3 > for gos-cisco2950-2 () > > [08-05-22@13:30:30] ERROR: Error walking 1.3.6.1.2.1.47.1.1.1.1.13 for > gos-cisco2950-2 () > > [08-05-22@13:30:30] ERROR: Failed too many queries on gos-cisco2950-2, > aborting query > > [08-05-22@13:30:30] ERROR: Error walking 1.3.6.1.2.1.47.1.1.1.1.11 for > gos-cisco2950-2 () > > > > Two of these oids are in ‘serial’ – and by running all tests except > ‘serial’ I’m now getting values. The problem was the ‘failed too many > queries’. > > > > I now see two features that would be nice for devmon: 1) the ability > to exclude specific tests for a device This one is on my own wish-list, I have been thinking about how to implement it, but need to get down to doing it. > , and 2) the ability to set a different query failure threshold. Yes, I thought about this when implementing this initially, I'll look at it soon. Regards, Buchan |
|
From: Buchan M. <bg...@st...> - 2008-05-28 13:13:12
|
On Tue, 2008-05-13 at 06:19 -0400, Meserole, Keith W. wrote: > Hi, > > > > I have been running Devmon 0.3.0-beta for some time without issues. Could you be more specific on the previous release? 0.3.0-beta2 ? Some other release? > While trying to upgrade to the 0.3.0 release it goes through the > entire cycle and at the end dies with the following lines from > devmon.log. > > > > Any thoughts? > > > > [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling > xxxxxxxxx > > [08-05-12@13:06:53] Fork 4 (23110) exceeded poll time polling > xxxxxxxxx > > [08-05-12@13:06:56] Error spawning snmp worker fork (Not enough > space) This is probably the problem, is your devmon box memory constrained? > [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy > > [08-05-12@13:06:57] Fork 11 (23107) exceeded poll time polling yyyyyyy > > [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx > > [08-05-12@13:07:32] Fork 4 () exceeded poll time polling xxx > > [08-05-12@13:07:32] Shutting down Regards, Buchan |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X