devmon-support

[Devmon] Templates

[Trent M. <tme...@sa...>]

Is there anywhere to download more templates than those provided with
the software?
=20
Thanks
Trent
=20

Trent Melcher
Unix/Linux Systems Administrator
Securities America Financial Corporation
(402) 399-9111 x2774
tme...@sa...=20

Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC.
Advisory services offered through Securities America Advisors, Inc., an
SEC Registered Investment Advisory

The text of this communication is confidential, and use by any person
who is not the intended recipient is prohibited.  Any person who
receives this communication in error is requested to immediately destroy
the text of this communication without copying or further dissemination.
Your cooperation is appreciated.

=20

[Devmon] Templates

[Trent M. <tme...@sa...>]

Anyone have templates for a Cisco 3745, 4506, 4006 or know if I can use
any of the existing templates for these?
=20
Trent
=20

Trent Melcher
Unix/Linux Systems Administrator
Securities America Financial Corporation
(402) 399-9111 x2774
tme...@sa...=20

Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC.
Advisory services offered through Securities America Advisors, Inc., an
SEC Registered Investment Advisory

The text of this communication is confidential, and use by any person
who is not the intended recipient is prohibited.  Any person who
receives this communication in error is requested to immediately destroy
the text of this communication without copying or further dissemination.
Your cooperation is appreciated.

=20

Re: [Devmon] Templates

[Michael A. P. <mp...@hs...>]

I am just starting to use Devmon myself and I am finding that some of 
the OID's are wrong and its not devmon's fault.

Its cisco's they are all different, and its frustrating. it depends on 
the MIB's that are installed on the devices them selves.
I have some 6509's answering with different MIB packages. The templates 
are good start though and they get you going.
I have been able to figure out the simple leaf OID's and change them as 
I need to. But I have not been able to fix the branching ones.
Those  are a little more difficult, but I will eventually. I am sorry 
that I do not have any of the devices you state below.

good luck, michael


Michael A. Price
Performance Network Engineering
NASA/GSFC Code 440.8/LMB
Greenbelt, Maryland 20770
----------------------------------------------




Trent Melcher wrote:
> Anyone have templates for a Cisco 3745, 4506, 4006 or know if I can 
> use any of the existing templates for these?
>  
> Trent
>  
>
> Trent Melcher
> Unix/Linux Systems Administrator
> Securities America Financial Corporation
> (402) 399-9111 x2774
> tme...@sa...
>
> Securities America, Inc., a Registered Broker/Dealer, Member 
> NASD/SIPC. Advisory services offered through Securities America 
> Advisors, Inc., an SEC Registered Investment Advisory
>
> The text of this communication is confidential, and use by any person 
> who is not the intended recipient is prohibited.  Any person who 
> receives this communication in error is requested to immediately 
> destroy the text of this communication without copying or further 
> dissemination.  Your cooperation is appreciated.
>
>  
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> ------------------------------------------------------------------------
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>   

[Devmon] Templates

[Francois L. <ka...@ka...>]

Hello,

I update the Cisco-asa and F5 Bigip lite templates on the SVN.
Thanks to Nathan Hand and Buchan Milne for getting this template better.

The Cisco-ASA template is working and has been test with:
Cisco Adaptive Security Appliance Version 7.0(6)
Cisco Adaptive Security Appliance Version 7.0(7)
Cisco Adaptive Security Appliance Version 7.0(5)
Cisco Cisco PIX Security Appliance Version 7.0(2)
Cisco Firewall Services Module Version 3.1(4)

Could anyone test it with other cisco pix and asa device in order to make a full list of compliant device with this template?

The F5 Bigip lite is design to work with a hobbit client in order to reduce snmp pooling when you have many VIP and POOL.
If you wish to do all via SNMP use F5 Bigip template.
 

I also update the documentation for GRAPHING.

http://devmon.svn.sourceforge.net/viewvc/*checkout*/devmon/trunk/docs/GRAPHING

It explain how grpahing CPU, MEMORY, connects, if_load, if_err, if_col from a template.
In a other hand the Cisco-asa and F5 Bigip lite are ready for graphing all of this.


I update/fix the regexp from if_load extract script in order to graph more interface.

Please share you template.

Regards,
Francois.

[Devmon] Templates

[Joshua K. <fo...@tr...>]

I have created a template for a DC Power plant made by Valere.  I have
walked the device and the OIDS would be classified as a BRANCH.  But when I
load the template I get this in hobbit.

 

Missing repeater data for primary OID

 

And when I tail the devmon.log it is showing:

 

[08-03-25@10:50:28] No SNMP data found for sysCurrent3 on gsonc-spg-valere-2

[08-03-25@10:50:28] No SNMP data found for sysSerialNum3 on
gsonc-spg-valere-2

[08-03-25@10:50:28] No SNMP data found for sysFWRev3 on gsonc-spg-valere-2

[08-03-25@10:50:28] No SNMP data found for sysCapacity3 on
gsonc-spg-valere-2

[08-03-25@10:50:28] No SNMP data found for sysModelNum3 on
gsonc-spg-valere-2

[08-03-25@10:50:28] No SNMP data found for sysPwrBay3 on gsonc-spg-valere-2

[08-03-25@10:50:28] No SNMP data found for sysModule3 on gsonc-spg-valere-2

[08-03-25@10:50:28] No SNMP data found for sysOperState3 on
gsonc-spg-valere-2

 

 

But I can walk the device and get data from all the oids.  Here is an
example:

 

sysPwrBay3       :       .1.3.6.1.4.1.13858.2.1.6.1.1.1    :       branch

 

[root@gsonc-spg-ops-1 tmp]# snmpwalk -v 2c -c public gsonc-spg-valere-2
.1.3.6.1.4.1.13858.2.1.6.1.1.1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.2 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.3 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.4 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.5 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.6 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.7 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.8 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.9 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.10 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.11 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.12 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.13 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.14 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.15 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.17 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.18 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.19 = INTEGER: 1

SNMPv2-SMI::enterprises.13858.2.1.6.1.1.1.21 = INTEGER: 1

 

So there is data there and it is repeating.  Anyone have any clues...

 

Thanks,

Josh

[Devmon] Templates

[Joshua K. <fo...@tr...>]

I already asked this once but didn't get response.  My current message file
has this entry in the first column and it is not working right:

{value1}-{value2}

 

I had a question about combining strings in devmon.  I have two values that
I would like to combine:

 

Say:

{value1} = 1 and {value2} = 2

 

What I am trying to do is have them combined so they look like:

1-2

 

I am trying to do this because these will be placed in the first column
which is what is pulled in for alarming.  And I want my alarming to be on
1-2 instead of just 1.  Because the first value stands for a shelf and the
second stands for a module.  I will have so many modules per a shelf, like:

 

1-1

1-2

1-3

1-4

 

2-1

2-2

2-3

2-4

 

-Josh

 

[Devmon] Devmon SNMP Query problem

[Michael A. P. <mp...@hs...>]

As anyone else seen this problem??? Or know how to fix this??

When i use a specific OID to poll a Nokia Firewall for the cluster 
status it returns the data type as INTEGER but really the data is a 
STRING , "member" is the data that is returned but the data type is 
INTEGER. This doesnt make since, and because of this, the logic for 
thresholds in devmon gets messed up. It thinks the data is a INTEGER and 
its really a STRING.

Does anyone know how to fix this within devmon ??? or the SNMP query??


thanx, michael







Michael A. Price
Performance Network Engineering
NASA/GSFC Code 440.8/LMB
Greenbelt, Maryland 20770
            

Re: [Devmon] Devmon SNMP Query problem

[Michael A. P. <mp...@hs...>]

Never mind,

I figured it out, the server had the MIB actually on the box and it was 
defining the number to a string.

Fixed it ;-)

thanx, michael

Michael A. Price
Performance Network Engineering
NASA/GSFC Code 440.8/LMB
Greenbelt, Maryland 20770
         




Michael A. Price wrote:
> As anyone else seen this problem??? Or know how to fix this??
>
> When i use a specific OID to poll a Nokia Firewall for the cluster 
> status it returns the data type as INTEGER but really the data is a 
> STRING , "member" is the data that is returned but the data type is 
> INTEGER. This doesnt make since, and because of this, the logic for 
> thresholds in devmon gets messed up. It thinks the data is a INTEGER and 
> its really a STRING.
>
> Does anyone know how to fix this within devmon ??? or the SNMP query??
>
>
> thanx, michael
>
>
>
>
>
>
>
> Michael A. Price
> Performance Network Engineering
> NASA/GSFC Code 440.8/LMB
> Greenbelt, Maryland 20770
>             
>
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
>