Re: [Devil-Linux-discuss] devil-linux-1.8.0-2015-12-21 uploaded

[Udo L. <udo...@al...>]

Hi,
tested devil-linux-1.8.0-2016-01-03-i686 on pve4.1 (host running kernel:
4.2.3-2-pve).
The devil-linux VM start, but is extremly slowly - use 100%cpu and need
app. 3 hours to boot with 1 CPU and automatic config upgrade.

After boot the load is > 1 but in top is mostly all idle... shutdown
takes also a long time.

After that (with config-save for 1.8.0-2016-01-03) I added one more CPU
and the boot proccess takes 9 min. "only".

With dl-1.8.0-2016-01-03-x86_64-server boot the same VM in 27sec with
automatic config update...

How to dig where the issue is?


BTW: config on virtio-devices work on pve4 (qemu 2.4) also!


Udo


On 03.01.2016 19:41, Udo Lembke wrote:
> Hi Heiko,
> Thanks!! Work like a charm (bareos and virtio with config-data -
> tested on pve3.4 only; on pve4 I will do the test tomorrow).
>
> One strange fact: Since >devil-linux 1.8.0 2015-12-04 the VMs don't
> start on an 3.10 host-kernel!
> They hang with 100% cpu.
>
> Last output is "Starting up final system...", or sometimes three
> further Lines:
> Changed Root
> Populating /var
> cp: preserving times for '/shm/var/adm/boot': Read-only file system
>
> Strange is, that the same VM run on the same proxmox ve version but
> with an 2.6.32-kernel on the host.
> And this only happens with the i686-system. The amd64-server-system
> work well...
> Will test, which happens on pve4 (kernel 4.x) tomorrow.
>
> Udo
>
> On 03.01.2016 15:15, Heiko Zuerker wrote:
>>
>> Udo,
>>
>> Bacula has now been replaced with Bareos on DL, so you should be good
>> to go.
>>
>> Heiko
>>
>> Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...>>:
>>
>>