Re: [Devil-Linux-discuss] SNMPd not returning system or interfaces

[Udo L. <udo...@al...>]

Hi Luca,
works well for me:

snmpwalk -v 1 -c abc_hh 192.168.40.13 interface
IF-MIB::ifNumber.0 = INTEGER: 2
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 16436
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 1000000000
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: ee:2e:19:8d:50:93
...


with follwing definition in /etc/snmpd.conf:
com2sec mynetwork 192.168.3.21/32  supergeheim

regards

Udo

Am 10.04.2014 12:07, schrieb Luca Iacono:
> Dear All,
>
> I am writing as I've been trying to setup an MRTG server in my network
> to monitor bandwidth on Devil-Linux gateways.  I have activated
> net-snmp on Devil Linux, changed the agent to accept requests from the
> subnet, use public community for full access.  following are the
> changes i have applied to /etc/snmpd.conf.
> have done the same on a Debian Server and those changes were enough to
> make it accept request from the subnet.
>
> agentAddress udp:161,udp6:[::1]:161
> rocommunity public 192.168.1.0/24
>
> when I execute from the MRTG ( Debian Server ) on 192.168.1.0/24
>
> snmpwalk -v 1 -c public 192.168.1.1 interfaces
>  or
> snmpwalk -v 1 -c public 192.168.1.1 system
>
> I get Unknown Object Identifier (Sub-id not found: (top) ->
> interfaces) ...
>
> whereas when I do execute the same command from the Devil to MRTG
> server, i get a response.
>
> Your help will be very much appreciated.
>
> Many Thanks
>
> Luca