|
From: Jan H. P. <jh...@jh...> - 2014-03-18 23:07:18
|
Hi everyone, I'm currently setting up a new router and I run into a strange issue. After I created the build I first used it to upgrade a running router. This was perfectly fine. The configuration was picked up just fine and everything worked again. Now I have a new router with some special motherboard with a CF slot and 8 1G interfaces. Very nice for a router. I took a CF card, put the install on this CF card on partition 1 (400G) and on a second partition (100G) I put the configuration set. The system boots fine but then ..... It is not able to find the configuration on the second partition of the CF card and it looks like it doesn't see the CF card at all. I have to put in a USB stick with the complete content of the CDROM and the configuration set to be able to get it working because it still searches for the CDROM while everything should be on the CF card. If I put in a USB stick with just the configuration set it will start searching for the Devil-Linux CDROM and it won't find it and then it fails. Does anyone have a sollution for this? Jan Hugo Prins |