Re: [Devil-Linux-discuss] Add more NIC

[Boursin O. <oli...@in...>]

Hello,
Many thanks to everyone for kind help and advices.

OB

On Wed, Sep 29, 2010 at 10:45 AM, Boursin Olivier
<oli...@in...>wrote:

> Hello Dominic,
> You were right, the problem is solved ! It was under my nose, but ...
> Many thanks,
>
> OB
>
> Date: Wed, 29 Sep 2010 14:39:55 +0100
> From: Dominic Raferd <dl...@ed...>
> Subject: Re: [Devil-Linux-discuss] Add more NIC
> To: dev...@li...
> Message-ID: <4CA...@ed...>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>  Why DEVICE=eth0 for all of your NICs? I think it should be eth0,
eth1,
>
> eth2, eth3...
>
> Dominic
>
> On 29/09/2010 14:10, Boursin Olivier wrote:
> >
> > Hello,
> > I would like to know if it is possible to add one or two more NIC in
> > addition of the 3, to build a firewall router with 4 or 5 NIC. I
tried
>
> > to configure /etc/sysconfig/nic (files ifcfg-eth3 and ifcfg-eth4)
but
> > it is visible as two more eth2 when starting /etc/init.d/network.
> >
> > Many thanks for your kind answer,
> >
> > OB
> >
> > /etc/sysconfig/nic>cat ifcfg-eth0
> > DEVICE=eth0
> > ONBOOT=yes
> > MODULE="8139too"
> > DHCP=no
> > IP="192.168.0.1"
> > NETMASK="255.255.255.0"
> > BROADCAST="192.168.0.255"
> >
> > /etc/sysconfig/nic>cat ifcfg-eth1
> > DEVICE=eth0
> > ONBOOT=yes
> > MODULE="8139too"
> > DHCP=no
> > IP="192.168.1.254"
> > NETMASK="255.255.255.0"
> > BROADCAST="192.168.1.255"
> >
> > /etc/sysconfig/nic>cat ifcfg-eth2
> > DEVICE=eth0
> > ONBOOT=yes
> > MODULE="8139too"
> > DHCP=no
> > IP="192.168.9.254"
> > NETMASK="255.255.255.0"
> > BROADCAST="192.168.9.255"
> >
> > /etc/sysconfig/nic>cat ifcfg-eth3
> > DEVICE=eth0
> > ONBOOT=yes
> > MODULE="8139too"
> > DHCP=no
> > IP="192.168.10.254"
> > NETMASK="255.255.255.0"
> > BROADCAST="192.168.10.255"
> >
> > /etc/sysconfig/nic>cat ifcfg-eth4
> > DEVICE=eth0
> > ONBOOT=yes
> > MODULE="8139too"
> > DHCP=no
> > IP="192.168.15.254"
> > NETMASK="255.255.255.0"
> > BROADCAST="192.168.15.255"
> >
> > /etc/init.d/network start
> > Starting interface eth0
> > [IPv4]
>
> > [  OK  ]
> > Starting interface eth1
> > [IPv4]
>
> > [  OK  ]
> >
> > Starting interface eth2
> > [IPv4]
>
> > [  OK  ]
> >
> > Starting interface eth2
> > [IPv4]
>
> > [  OK  ]
> >
> > Starting interface eth2
> > [IPv4]
>
> > [  OK  ]
> >
> > Enabling Routing
> > [IPv4]
>
> > [  OK  ]
> >
> > Disabling ECN
> >
>
>