From: <pr...@ga...> - 2008-01-30 21:41:33
|
hi > The Default Gateway is defined in setup under NET / Additional / Gateway. > Do you have firewall rules enabled? Is the port open? > > here are the details: ROUTER: external address (let's say) 213.76.212.111 internal addess: 192.168.0.1 virtual server: 192.168.0.223 on both UDP/TCP ext port 53/int port 53 DEVIL: NIC1: IP address: 192.168.0.223 mask: 255.255.255.0 DHCP is off no acting as DHCP server ADDITIONAL: primary DNS: 127.0.0.1 default gateway: 192.168.0.1 others are empty services: only BEEP and BIND are running, FIREWALL is off netstat -l --numeric-ports tcp 192.168.0.223:53 udp 192.168.0.223:53 tcp 127.0.0.1:53 udp 127.0.0.1:53 when I set my station as the following: address IP: 192.168.0.4 mask: 255.255.255.0 gateway: 192.168.0.2 (another Internet router) server DNS: 192.168.0.223 and run ping www.devil-linux.org it gives: 64 bytes from vhost.sourceforge.net (66.35.250.210): icmp_seq=1 ttl=50 time=215 ms but changing server DNS into 213.76.212.111 (getting DNS from external) ping: unknown host www.devil-linux.org means: router does not bind to the interface 192.168.0.223 it's not a problem of the router configuration, because if it is set to another DNS server (running on CRUX, with "/sbin/route add default gw 192.168.0.1" command in the "net" file) everything works just fine what I've found in the ifcfg-eth0 file is "route" as this one: ROUTE="$ROUTE default/0.0.0.0:192.168.0.1" so ... what is wrong in my config ? P. |