[Devil-Linux-discuss] CF card on IDE bus

[Fred F. <ffr...@lo...>]

I am having a strange problem. I used the install-on-usb scrip to build
up the system on a CF card that then went into another unit which sees
it as an IDE drive (hda1). It boots up fine up to the point where it
gets to remount the cd image stored there (loopback). It then cannot
mount it again.

It goes:

Searching for Devil-Linux CD-ROM
 Checking /dev/ide/host0/bus0/target0/lun0/part1 media found
mount: /dev/loop/0 is write-protected, mounting read-only
Loading configuration

Searching for Devil-Linux CD-ROM
 Checking /dev/ide/host0/bus0/target0/lun0/part1 mount failed
!!!  Devil-Linux CD-ROM not found  !!!

Has anyone experienced something similar?

I am using an NSA1042 headless unit if it makes a difference. =20

Fred Frigerio
Locust USA
=20
This electronic message transmission contains information from Locust
USA which may be confidential or privileged.  The information is
intended to be for the use of the individual or entity named above.  If
you are not the intended recipient, be aware that any disclosure,
copying, distribution or use of the contents of this information is
prohibited.  If you have received this electronic transmission in error,
please notify us by telephone (305-889-5410) or by reply via electronic
mail immediately.