From: Andreas G. <a.g...@gu...> - 2010-12-07 17:37:46
|
hi together, i use DL for a long time. and i'm very happy with it. great work! but now after the upgrade to v1.4 i would like to add 2 features (privoxy and tinc). i had a look at the documentation and started "from scratch" ... im not really an expert in programming and compiling - so i first want to build the bootcd.iso without any modifications of the source. but i ran into an error and yes here i am :-) i did it step by step .. but while compiling util-linux, i get an error. i put the output and the logfile here => http://pastebin.com/FtLB53Nq hope someone has a tip.. regards, Andreas |
From: Serge L. <ser...@gm...> - 2010-12-07 18:55:10
|
Andreas, The error is: > patch loop-AES > patching file mount/Makefile.am > Reversed (or previously applied) patch detected! Assume -R? [n] > Apply anyway? [n] > Skipping patch. I'm not sure that it's DL bug, but you can check that. Please remove DL_DIR/data/build/tmp/util-linux-*, untar unpatched source file (DL_DIR/data/build/src/util-linux-ng-2.18.tar.bz2) to DL_DIR/data/build/tmp/ and continue the build ("make build"). It should be OK after that. Serge On 12/07/2010 09:22 AM, Andreas Gutowski wrote: > hi together, > > i use DL for a long time. and i'm very happy with it. great work! > > but now after the upgrade to v1.4 i would like to add 2 features > (privoxy and tinc). i had a look at the documentation and started "from > scratch" ... im not really an expert in programming and compiling - so > i first want to build the bootcd.iso without any modifications of the > source. but i ran into an error and yes here i am :-) > > i did it step by step .. but while compiling util-linux, i get an error. > i put the output and the logfile here > > => http://pastebin.com/FtLB53Nq > > hope someone has a tip.. > > regards, > Andreas > > > ------------------------------------------------------------------------------ > What happens now with your Lotus Notes apps - do you make another costly > upgrade, or settle for being marooned without product support? Time to move > off Lotus Notes and onto the cloud with Force.com, apps are easier to build, > use, and manage than apps on traditional platforms. Sign up for the Lotus > Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > |
From: Andreas G. <a.g...@gu...> - 2010-12-09 08:41:41
|
hi, thanks for the tips. but i think i made a mistake somewhere. to have a clean system i set up a "build-box" yesterday :-) ubuntu 8.04 i386 on virtualbox copied the lfssystem to it and after a 'make mrproper' i started the build process again. an now everything looks good. now i'm just running 'make install' ... ... so lets see. regards, andreas Am 07.12.2010 19:54, schrieb Serge Leschinsky: > Andreas, > > The error is: > >> patch loop-AES >> patching file mount/Makefile.am >> Reversed (or previously applied) patch detected! Assume -R? [n] >> Apply anyway? [n] >> Skipping patch. > > I'm not sure that it's DL bug, but you can check that. Please remove > DL_DIR/data/build/tmp/util-linux-*, untar unpatched source file > (DL_DIR/data/build/src/util-linux-ng-2.18.tar.bz2) to DL_DIR/data/build/tmp/ and > continue the build ("make build"). It should be OK after that. > > Serge > > > On 12/07/2010 09:22 AM, Andreas Gutowski wrote: >> hi together, >> >> i use DL for a long time. and i'm very happy with it. great work! >> >> but now after the upgrade to v1.4 i would like to add 2 features >> (privoxy and tinc). i had a look at the documentation and started "from >> scratch" ... im not really an expert in programming and compiling - so >> i first want to build the bootcd.iso without any modifications of the >> source. but i ran into an error and yes here i am :-) >> >> i did it step by step .. but while compiling util-linux, i get an error. >> i put the output and the logfile here >> >> => http://pastebin.com/FtLB53Nq >> >> hope someone has a tip.. >> >> regards, >> Andreas |
From: Andreas G. <a.g...@gu...> - 2010-12-10 07:39:28
|
morning, o.k. now i understood the build process :-) tinc and privoxy are compiled and installed. only the customizing of the configfiles has to be done. but for now i will copy the config files from etc.tar.bz2 thanks. regards, andreas Zitat von Andreas Gutowski <a.g...@gu...>: > hi, > > thanks for the tips. but i think i made a mistake somewhere. > > to have a clean system i set up a "build-box" yesterday :-) > > ubuntu 8.04 i386 on virtualbox > > copied the lfssystem to it and after a 'make mrproper' i started the > build process again. an now everything looks good. now i'm just running > 'make install' ... > > ... so lets see. > > regards, > andreas > > Am 07.12.2010 19:54, schrieb Serge Leschinsky: >> Andreas, >> >> The error is: >> >>> patch loop-AES >>> patching file mount/Makefile.am >>> Reversed (or previously applied) patch detected! Assume -R? [n] >>> Apply anyway? [n] >>> Skipping patch. >> >> I'm not sure that it's DL bug, but you can check that. Please remove >> DL_DIR/data/build/tmp/util-linux-*, untar unpatched source file >> (DL_DIR/data/build/src/util-linux-ng-2.18.tar.bz2) to >> DL_DIR/data/build/tmp/ and >> continue the build ("make build"). It should be OK after that. >> >> Serge >> >> >> On 12/07/2010 09:22 AM, Andreas Gutowski wrote: >>> hi together, >>> >>> i use DL for a long time. and i'm very happy with it. great work! >>> >>> but now after the upgrade to v1.4 i would like to add 2 features >>> (privoxy and tinc). i had a look at the documentation and started "from >>> scratch" ... im not really an expert in programming and compiling - so >>> i first want to build the bootcd.iso without any modifications of the >>> source. but i ran into an error and yes here i am :-) >>> >>> i did it step by step .. but while compiling util-linux, i get an error. >>> i put the output and the logfile here >>> >>> => http://pastebin.com/FtLB53Nq >>> >>> hope someone has a tip.. >>> >>> regards, >>> Andreas > > ------------------------------------------------------------------------------ > This SF Dev2Dev email is sponsored by: > > WikiLeaks The End of the Free Internet > http://p.sf.net/sfu/therealnews-com > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > -- eMail : a.g...@gu... | Webseite: http://www.guddl.de Jabber: guddl[at]jabber.guddl.net | ICQ: 143640469 | Skype: guddl75 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. |
From: Heiko Z. <he...@zu...> - 2010-12-07 18:56:52
|
Quoting Andreas Gutowski <a.g...@gu...>: > hi together, > > i use DL for a long time. and i'm very happy with it. great work! > > but now after the upgrade to v1.4 i would like to add 2 features > (privoxy and tinc). i had a look at the documentation and started "from > scratch" ... im not really an expert in programming and compiling - so > i first want to build the bootcd.iso without any modifications of the > source. but i ran into an error and yes here i am :-) > > i did it step by step .. but while compiling util-linux, i get an error. > i put the output and the logfile here > > => http://pastebin.com/FtLB53Nq > > hope someone has a tip.. > For some reason it's trying to apply the loop-aes patch for util-linux again. Did you try to compile before and didn't do a "make mrproper" to clean the build env up? Workaround: Execute the following commands (be in the root of the build directory). rm -rf tmp/util-linux* tar -C tmp -xjf src/util-linux-ng-2.18.tar.bz2 Then try the "make build" again. -- Regards Heiko Zuerker http://www.devil-linux.org ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. |