Diego Torres wrote:
>On Sun, Sep 12, 2004 at 10:26:14AM -0400, Heiko Zuerker wrote:
>
>
>
>>I actually had this on my list, but there's some more work to be done.
>>The are new components for hostap (like wpa_supplicant, or whatever the
>>name was).
>>
>>
>
>wpa_supplicant & friends aren't need for normal operation, but... who
>defines normal? :)
>
>
It would be great if you could add it, since WPA improves the wireless
security.
>if you use hostap, you should copy the drivers from hostap-drivers-0.2.4
>to the pcmcia-cs package, then compile. hostap enables firmware
>uploading in a very safe way (does version&compatibility checkings)
>
>if you use linux-wlan-ng, disable the kernel module version. somewhere
>in time, it provided prism2dl, that updates the firmware but can kill
>your wireless card if you choose the wrong firmware version.
>
>don't use both at the same time. this is important. there are cards
>supported with both packages, and wont work like you want if you have
>two modules at the same time loaded.
>
>firmware upgrade is useful because you can make your board act as an AP,
>enable WDSS and a lot of more advanced stuff (bugfixing, for example).
>
>if you're using a motherboard with problems on the APIC (and then the
>information from irq lines is wrong/missing), you probably couldn't use
>pcmcia-cs, and should stick to the in-kernel pcmcia support. then hostap
>is not an option for you, and you should use linux-wlan-ng (my case).
>this is because hostap can't be used with newer kernels (>2.4.24).
>
>
>
Did you already do a test compile with the newer hostap ?
Everything works fine?
--
Regards
Heiko Zuerker
http://www.devil-linux.org
|
