Thread: [Dev-C++] Timestamp out of range: substituing ....
Open Source C & C++ IDE for Windows
Brought to you by:
claplace
|
From: Alessandro B. <al...@vi...> - 2004-02-23 16:48:29
|
Hi all, this is not a real problem and it is not strictly about DevCpp, but I = don't know what happens and so I ask for someone knows. Sometimes when I compile the project I receive this 2 messages from the = make.exe Timestamp out of range: substituing 1970:01:01 01:00:00 Timestamp out of range: substituing 1970:01:01 01:00:00 Looking at the Compile log it seems the compilation happens three times = and this is the reason for the messages. Then, why the compilation = happens three times? Thanks in advance. Alessandro |
|
From: Per W. <pw...@ia...> - 2004-02-23 17:04:35
|
Do you keep your source on a networked drive? When building from a networked drive, you might often get problems with file times, since the make program is using the clock of the local machine, but the newly created files will get the timestamp from the clock on the server who owns the file system. /Per W On Mon, 23 Feb 2004, Alessandro Bugatti wrote: > Hi all, > this is not a real problem and it is not strictly about DevCpp, but I don't know what happens and so I ask for someone knows. > Sometimes when I compile the project I receive this 2 messages from the make.exe > Timestamp out of range: substituing 1970:01:01 01:00:00 > Timestamp out of range: substituing 1970:01:01 01:00:00 > Looking at the Compile log it seems the compilation happens three times and this is the reason for the messages. Then, why the compilation happens three times? > > Thanks in advance. > Alessandro |
|
From: Alessandro B. <al...@vi...> - 2004-02-23 19:58:48
|
No, all the sources are in local drive, and these messages are shown only few times, but I don't understand why :-) Alessandro ----- Original Message ----- From: "Per Westermark" <pw...@ia...> To: "Alessandro Bugatti" <al...@vi...> Cc: <dev...@li...> Sent: Monday, February 23, 2004 5:56 PM Subject: Re: [Dev-C++] Timestamp out of range: substituing .... > Do you keep your source on a networked drive? When building from a > networked drive, you might often get problems with file times, since the > make program is using the clock of the local machine, but the newly > created files will get the timestamp from the clock on the server who owns > the file system. > > /Per W > > On Mon, 23 Feb 2004, Alessandro Bugatti wrote: > > > Hi all, > > this is not a real problem and it is not strictly about DevCpp, but I don't know what happens and so I ask for someone knows. > > Sometimes when I compile the project I receive this 2 messages from the make.exe > > Timestamp out of range: substituing 1970:01:01 01:00:00 > > Timestamp out of range: substituing 1970:01:01 01:00:00 > > Looking at the Compile log it seems the compilation happens three times and this is the reason for the messages. Then, why the compilation happens three times? > > > > Thanks in advance. > > Alessandro > > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > Dev-cpp-users mailing list > Dev...@li... > TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users |
|
From: Doug M. <dou...@al...> - 2004-02-23 20:39:21
|
Check the posts of the past couple of weeks. I'm sure I saw an exchange about this during that period. I think there's a compiler setting in dev-c++ that someone was told to adjust because there was a small amount of jitter in the time stamps on files that occasionally caused make to complain. > No, all the sources are in local drive, and these messages are shown > only few times, but I don't understand why :-) Alessandro ----- > Original Message ----- From: "Per Westermark" <pw...@ia...> > To: "Alessandro Bugatti" <al...@vi...> Cc: > <dev...@li...> Sent: Monday, February 23, 2004 > 5:56 PM Subject: Re: [Dev-C++] Timestamp out of range: substituing > .... > >>> Do you keep your source on a networked drive? When building from >>> a networked drive, you might often get problems with file times, >>> since the make program is using the clock of the local machine, >>> but the newly created files will get the timestamp from the clock >>> on the server who owns the file system. >>> >>> /Per W >>> >>> On Mon, 23 Feb 2004, Alessandro Bugatti wrote: >>> >> >>>>> Hi all, this is not a real problem and it is not strictly >>>>> about DevCpp, but I > > don't know what happens and so I ask for someone knows. > >>>>> Sometimes when I compile the project I receive this 2 >>>>> messages from the > > make.exe > >>>>> Timestamp out of range: substituing 1970:01:01 01:00:00 >>>>> Timestamp out of range: substituing 1970:01:01 01:00:00 >>>>> Looking at the Compile log it seems the compilation happens >>>>> three times > > and this is the reason for the messages. Then, why the compilation > happens three times? > >>>>> >>>>> Thanks in advance. Alessandro |
|
From: Alessandro B. <al...@vi...> - 2004-02-23 21:20:33
|
I tried to modify the Delay Compile in Compiler Options from 0 ms to 500 ms, but I obtain the same result. Alessandro ----- Original Message ----- From: "Doug MacDonald" <dou...@al...> To: "Alessandro Bugatti" <al...@vi...> Cc: "Per Westermark" <pw...@ia...>; <dev...@li...> Sent: Monday, February 23, 2004 9:31 PM Subject: Re: [Dev-C++] Timestamp out of range: substituing .... > Check the posts of the past couple of weeks. I'm sure I saw an exchange > about this during that period. I think there's a compiler setting in > dev-c++ that someone was told to adjust because there was a small amount > of jitter in the time stamps on files that occasionally caused make to > complain. > > > No, all the sources are in local drive, and these messages are shown > > only few times, but I don't understand why :-) Alessandro ----- > > Original Message ----- From: "Per Westermark" <pw...@ia...> > > To: "Alessandro Bugatti" <al...@vi...> Cc: > > <dev...@li...> Sent: Monday, February 23, 2004 > > 5:56 PM Subject: Re: [Dev-C++] Timestamp out of range: substituing > > .... > > > >>> Do you keep your source on a networked drive? When building from > >>> a networked drive, you might often get problems with file times, > >>> since the make program is using the clock of the local machine, > >>> but the newly created files will get the timestamp from the clock > >>> on the server who owns the file system. > >>> > >>> /Per W > >>> > >>> On Mon, 23 Feb 2004, Alessandro Bugatti wrote: > >>> > >> > >>>>> Hi all, this is not a real problem and it is not strictly > >>>>> about DevCpp, but I > > > > don't know what happens and so I ask for someone knows. > > > >>>>> Sometimes when I compile the project I receive this 2 > >>>>> messages from the > > > > make.exe > > > >>>>> Timestamp out of range: substituing 1970:01:01 01:00:00 > >>>>> Timestamp out of range: substituing 1970:01:01 01:00:00 > >>>>> Looking at the Compile log it seems the compilation happens > >>>>> three times > > > > and this is the reason for the messages. Then, why the compilation > > happens three times? > > > >>>>> > >>>>> Thanks in advance. Alessandro > > > > |
|
From: Alessandro B. <al...@vi...> - 2004-02-23 21:23:33
|
I solve my problem (even if I don't exactly why). I changed the executable name from "Sequenza con interi.exe" (name with space) to "Sequenza.exe" (without space) and the problem disappears. Thanks all Alessandro ----- Original Message ----- From: "Doug MacDonald" <dou...@al...> To: "Alessandro Bugatti" <al...@vi...> Cc: "Per Westermark" <pw...@ia...>; <dev...@li...> Sent: Monday, February 23, 2004 9:31 PM Subject: Re: [Dev-C++] Timestamp out of range: substituing .... > Check the posts of the past couple of weeks. I'm sure I saw an exchange > about this during that period. I think there's a compiler setting in > dev-c++ that someone was told to adjust because there was a small amount > of jitter in the time stamps on files that occasionally caused make to > complain. > > > No, all the sources are in local drive, and these messages are shown > > only few times, but I don't understand why :-) Alessandro ----- > > Original Message ----- From: "Per Westermark" <pw...@ia...> > > To: "Alessandro Bugatti" <al...@vi...> Cc: > > <dev...@li...> Sent: Monday, February 23, 2004 > > 5:56 PM Subject: Re: [Dev-C++] Timestamp out of range: substituing > > .... > > > >>> Do you keep your source on a networked drive? When building from > >>> a networked drive, you might often get problems with file times, > >>> since the make program is using the clock of the local machine, > >>> but the newly created files will get the timestamp from the clock > >>> on the server who owns the file system. > >>> > >>> /Per W > >>> > >>> On Mon, 23 Feb 2004, Alessandro Bugatti wrote: > >>> > >> > >>>>> Hi all, this is not a real problem and it is not strictly > >>>>> about DevCpp, but I > > > > don't know what happens and so I ask for someone knows. > > > >>>>> Sometimes when I compile the project I receive this 2 > >>>>> messages from the > > > > make.exe > > > >>>>> Timestamp out of range: substituing 1970:01:01 01:00:00 > >>>>> Timestamp out of range: substituing 1970:01:01 01:00:00 > >>>>> Looking at the Compile log it seems the compilation happens > >>>>> three times > > > > and this is the reason for the messages. Then, why the compilation > > happens three times? > > > >>>>> > >>>>> Thanks in advance. Alessandro > > > > |
|
From: Doug M. <dou...@al...> - 2004-02-24 07:01:58
|
> I solve my problem (even if I don't exactly why). I changed the > executable name from "Sequenza con interi.exe" (name with space) to > "Sequenza.exe" (without space) and the problem disappears. Thanks all > Alessandro _That's_ interesting. Maybe make was removing the quotes so it saw your embedded-space filename as multiple targets. Glad you got sorted out, anyway. Doug |