dev-cpp-users — Dev-C++ users discussion list

Re: [Dev-C++] Re: Please Post messages in Plain Text

[Per W. <pw...@ia...>]

I think Ioannis is responsible for the majority of your =xx characters :-)

Since I'm readning the individual mails, my mail program handles the
majority of the characters. However, it seems that the mailer used goofs
for some characters. I'm not sure if it's the = character that gets
incorrectly encoded - or probably not encoded - resulting in large parts
of some mails to be impossible to read. My Pine balks and writes invalid
xxx encoding something, and if the mail seem important, I have to browse
the raw mail file...

/Per W

On Mon, 10 Mar 2003, Cristian Burneci wrote:

> Hello
>
> I subscribed to this list recently in the digest mode and I noticed
> these very interesting messages, but very hard to read... Every char except
> ordinary letters and numbers, appear like "=XX" (see the excerpt below). This
> makes especially the code snippets almost impossible to read
>
> As I receive yhe messages from the list in the digest mode, is very hard to
> assume what encoding are you using. Furthermore I don't know for sure which
> e-mail client are you using, but its authors are very twisted-minded leaving
> this setting as the default... Your messages look the same when the digest is
> displayed in various e-mail clients like Pine, Pegasus Mail and XFMail.
>
> Hoping this bug will be fixed too :)
>
> Best regards
>
> Cristian Burneci
>
> On 09-Mar-2003 dev...@li... wrote:
> > --__--__--
> >
> > Message: 4
> > Date: Sun, 9 Mar 2003 15:07:26 +0200 (GTB Standard Time)
> > From: "Ioannis Vranos" <iv...@in...>
> > To: "Dev-C++ Mailing List" <dev...@li...>
> > Subject: Re: [Dev-C++] Please Post messages in Plain Text
> >
> > I 'll try my best (the default of my email client is  HTML and it is pain=
> >  to
> > make it text explicitly).=0D
> >  =0D
> > The funny thing however is that your email apparently was not text...=0D
> >  =0D
> >  =0D
> >  =0D
> > Ioannis Vranos=0D
> >  =0D
> > * Programming pages: http://www.noicys.freeurl.com=0D
> > * Alternative URL: http://run.to/noicys =0D
> >  =0D
> >  =0D
> >  =0D
> > -------Original Message-------=0D
> >  =0D
> > From: Trevor S. Guerra=0D
> > Date: =CA=F5=F1=E9=E1=EA=DE, 9 =CC=DC=F1=F4=E9=EF=F2 2003 11:26:13 =F0=EC=
> > =0D
> > To: no...@ho...=0D
> > Cc: dev...@li...=0D
> > Subject: [Dev-C++] Please Post messages in Plain Text=0D
> >  =0D
> > Hi Ioannis!=0D
> >  =0D
> > Thanks for your posts to the Dev-CPP group.=0D
> >  =0D
> > However, I humbly request you to please post your messages/ replies in PL=
> > AIN
> > TEXT, as it becomes a *pain* otherwise to read...=0D
> >  =0D
> > TIA,=0D
> > Trevor=0D
> > =20
> >
> >
>
> --
> Cristian Burneci
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger
> for complex code. Debugging C/C++ programs can leave you feeling lost and
> disoriented. TotalView can help you find your way. Available on major UNIX
> and Linux platforms. Try it free. www.etnus.com
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

Re: [Dev-C++] gas again

[Per W. <pw...@ia...>]

I have no experience with gas, but are you clearing your stack
arguments (addl $xx,%esp) correctly. In my eyes, you seem to pop too much
data. You should only remove as much data as you have pushed on the
stack.

One other thing. You might bunch together a lot of calls before finally
clearing the stack, i.e. you don't have to remove the arguments between
each function call.

/Per W

On Sun, 9 Mar 2003, Carlos Garc=EDa del Monte wrote:

>   Well, I'll need to work it out from zero myself (but after learning
> NASM). I want only one question I cannot solve, and if it gets assembled
> without errors I don't know if it because it is done right or not, in
> fact I get run-time errors.
> It's about variable declaration and initialization:
>
> The current code which is assembled but doesn't run is:
>
> .data
> mensaje1: .ascii "Introduzca un n=FAmero\n\0"
> mensaje2: .ascii "El doble es: \0"
> string: .ascii "%d\n\0"
> numer: .long 200
>
> .bss
> .comm entero, 4
>
>
> .text
> .global _asm_main
> .extern _printf
> .extern scanf
> _asm_main:
> enter    $0, $0
> pusha
>
> movl    (mensaje1),    %eax
> push    %eax
> call    _printf
> addl    $12,    %esp
>
> movl    numer,    %eax
> push    %eax
> push    (string)
> call    _printf
> addl    $16,    %esp
>
> push    (entero)
> push    (string)
> call    _scanf
> movl    %eax,    (entero)
> addl    $16,    %esp
>
> movl    entero,    %eax
> addl    %eax,    %eax
> movl    %eax,    %ebx
>
> movl    (mensaje2),    %eax
> push    %eax
> call    _printf
> addl    $12,    %esp
>
> movl    %ebx,    %eax
> push    %eax
> push    (string)
> call    _printf
> addl    $16, %ebp
>
> popa
> movl    $0,    %eax
> leave
> ret
>
> Can someone make these pieces of code be correctly written? If so many
> thanks, if not, thanks anyway.
> Have a nice day, all of you.
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Etnus, makers of TotalView, The debugg=
er
> for complex code. Debugging C/C++ programs can leave you feeling lost and
> disoriented. TotalView can help you find your way. Available on major UNI=
X
> and Linux platforms. Try it free. www.etnus.com
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

[Dev-C++] Re: Please Post messages in Plain Text

[Cristian B. <cbu...@to...>]

Hello

I subscribed to this list recently in the digest mode and I noticed
these very interesting messages, but very hard to read... Every char except
ordinary letters and numbers, appear like "=XX" (see the excerpt below). This
makes especially the code snippets almost impossible to read 

As I receive yhe messages from the list in the digest mode, is very hard to 
assume what encoding are you using. Furthermore I don't know for sure which
e-mail client are you using, but its authors are very twisted-minded leaving
this setting as the default... Your messages look the same when the digest is
displayed in various e-mail clients like Pine, Pegasus Mail and XFMail. 

Hoping this bug will be fixed too :)

Best regards

Cristian Burneci

On 09-Mar-2003 dev...@li... wrote:
> --__--__--
> 
> Message: 4
> Date: Sun, 9 Mar 2003 15:07:26 +0200 (GTB Standard Time)
> From: "Ioannis Vranos" <iv...@in...>
> To: "Dev-C++ Mailing List" <dev...@li...>
> Subject: Re: [Dev-C++] Please Post messages in Plain Text
> 
> I 'll try my best (the default of my email client is  HTML and it is pain=
>  to
> make it text explicitly).=0D
>  =0D
> The funny thing however is that your email apparently was not text...=0D
>  =0D
>  =0D
>  =0D
> Ioannis Vranos=0D
>  =0D
> * Programming pages: http://www.noicys.freeurl.com=0D
> * Alternative URL: http://run.to/noicys =0D
>  =0D
>  =0D
>  =0D
> -------Original Message-------=0D
>  =0D
> From: Trevor S. Guerra=0D
> Date: =CA=F5=F1=E9=E1=EA=DE, 9 =CC=DC=F1=F4=E9=EF=F2 2003 11:26:13 =F0=EC=
> =0D
> To: no...@ho...=0D
> Cc: dev...@li...=0D
> Subject: [Dev-C++] Please Post messages in Plain Text=0D
>  =0D
> Hi Ioannis!=0D
>  =0D
> Thanks for your posts to the Dev-CPP group.=0D
>  =0D
> However, I humbly request you to please post your messages/ replies in PL=
> AIN
> TEXT, as it becomes a *pain* otherwise to read...=0D
>  =0D
> TIA,=0D
> Trevor=0D
> =20
> 
> 

-- 
Cristian Burneci

[Dev-C++] listbox and detect scrollbar move?

[Danny R. <dro...@ho...>]

Hi,

Is it possible to detect scrollbar movement from a listbox and if so to =
get the position number of the first shown item
in the box so if the itemlist contains:


one
two
---
three
four
five
----
six


and between the ---'s are shown in the listbox, how do i figure out on =
which position i am at the first line in the listbox.


i just want to know when i scroll down in a listbox which items and =
there positions i am viewing..

Re: [Dev-C++] Mysql++ and mingw

[Zodiaq <zo...@ac...>]

Hello Napoleon and all Dev-C++ users,

Sunday, March 9, 2003, 7:45:00 PM, Napoleon wrote as follows:

NA> How do i setup mysql++ to work with mingw. I have Mysql installed.
NA> Which binaries should i download ?

Check this out:
http://www.mysql.com/products/mysql++/index.html

-- 
regards, Zodiaq

[Dev-C++] Mysql++ and mingw

[Napoleon A. <n_a...@ya...>]

How do i setup mysql++ to work with mingw. I have Mysql installed.
Which binaries should i download ?

Thanx

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/

Re: [Dev-C++] Please Post messages in Plain Text

[Daniel G. <sp...@ho...>]

it came through as text to my hotmail account...


>From: NimoTh <ni...@gm...>
>Reply-To: NimoTh <ni...@gm...>
>To: Dev Cpp Users <dev...@li...>
>Subject: Re: [Dev-C++] Please Post messages in Plain Text
>Date: Sun, 9 Mar 2003 17:47:57 +0100
>
>Hello Ioannis Vranos,
>on 09.03.03 you wrote:
>
> > I 'll try my best (the default of my email client is  HTML and it is 
>pain to
> > make it text explicitly).
>
>Thanks a lot. It rally is hard to read, so I appreciate your efford to
>ease the reading.
>
> > The funny thing however is that your email apparently was not text...
>
>I agree. Did he do it on purpose for demonstrating reasons?
>
>ps: I have accidently sent the mail to Vranos _only_ at first because the 
>list hasn't
>set up the reply-to <list> in the header.
>
>
>--
>
>Have a good day,
>
>NimoTh
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger
>for complex code. Debugging C/C++ programs can leave you feeling lost and
>disoriented. TotalView can help you find your way. Available on major UNIX
>and Linux platforms. Try it free. www.etnus.com
>_______________________________________________
>Dev-cpp-users mailing list
>Dev...@li...
>TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
>https://lists.sourceforge.net/lists/listinfo/dev-cpp-users


_________________________________________________________________
It's fast, it's easy and it's free. Get MSN Messenger today! 
http://messenger.msn.co.uk

Re: [Dev-C++] Please Post messages in Plain Text

[NimoTh <ni...@gm...>]

Hello Ioannis Vranos,
on 09.03.03 you wrote:

> I 'll try my best (the default of my email client is  HTML and it is pain to
> make it text explicitly).

Thanks a lot. It rally is hard to read, so I appreciate your efford to
ease the reading.

> The funny thing however is that your email apparently was not text...

I agree. Did he do it on purpose for demonstrating reasons?

ps: I have accidently sent the mail to Vranos _only_ at first because the list hasn't
set up the reply-to <list> in the header.


-- 

Have a good day,

NimoTh

Re: [Dev-C++] Please Post messages in Plain Text

[Ioannis V. <iv...@in...>]

I 'll try my best (the default of my email client is  HTML and it is pain=
 to
make it text explicitly).=0D
 =0D
The funny thing however is that your email apparently was not text...=0D
 =0D
 =0D
 =0D
Ioannis Vranos=0D
 =0D
* Programming pages: http://www.noicys.freeurl.com=0D
* Alternative URL: http://run.to/noicys =0D
 =0D
 =0D
 =0D
-------Original Message-------=0D
 =0D
From: Trevor S. Guerra=0D
Date: =CA=F5=F1=E9=E1=EA=DE, 9 =CC=DC=F1=F4=E9=EF=F2 2003 11:26:13 =F0=EC=
=0D
To: no...@ho...=0D
Cc: dev...@li...=0D
Subject: [Dev-C++] Please Post messages in Plain Text=0D
 =0D
Hi Ioannis!=0D
 =0D
Thanks for your posts to the Dev-CPP group.=0D
 =0D
However, I humbly request you to please post your messages/ replies in PL=
AIN
TEXT, as it becomes a *pain* otherwise to read...=0D
 =0D
TIA,=0D
Trevor=0D
=20

[Dev-C++] gas again

[<cg...@wo...>]

  Well, I'll need to work it out from zero myself (but after learning=20
NASM). I want only one question I cannot solve, and if it gets assembled=20
without errors I don't know if it because it is done right or not, in=20
fact I get run-time errors.
It's about variable declaration and initialization:

The current code which is assembled but doesn't run is:

.data
mensaje1: .ascii "Introduzca un n=FAmero\n\0"
mensaje2: .ascii "El doble es: \0"
string: .ascii "%d\n\0"
numer: .long 200

.bss
.comm entero, 4


.text
.global _asm_main
.extern _printf
.extern scanf
_asm_main:
enter    $0, $0
pusha

movl    (mensaje1),    %eax
push    %eax
call    _printf
addl    $12,    %esp

movl    numer,    %eax
push    %eax
push    (string)
call    _printf
addl    $16,    %esp

push    (entero)
push    (string)
call    _scanf
movl    %eax,    (entero)
addl    $16,    %esp

movl    entero,    %eax
addl    %eax,    %eax
movl    %eax,    %ebx

movl    (mensaje2),    %eax
push    %eax
call    _printf
addl    $12,    %esp

movl    %ebx,    %eax
push    %eax
push    (string)
call    _printf
addl    $16, %ebp

popa
movl    $0,    %eax
leave
ret

Can someone make these pieces of code be correctly written? If so many=20
thanks, if not, thanks anyway.
Have a nice day, all of you.

[Dev-C++] URL for Updates

[Trevor S. G. <Gue...@My...>]

I have a 56Kbps modem connexion to the Net.

While the vUpdate is a great package, it does NOT allow to resume broken =
downloads.  Since there are several users / countries where a DSL or =
Cable connexion to the Net isn't available, I request the developers of =
vUpdate to PLEASE incorporate an option to allow resumption of broken =
downloads.

Alternately, if the URLs at which the updates are available can be made =
known by some other means, we could use a standard downloader viz., DAP =
or FlashGet to do the job.

Hope this will be addressed ASAP...


TIA,
Trevor

[Dev-C++] Please Post messages in Plain Text

[Trevor S. G. <Gue...@My...>]

Hi Ioannis!

Thanks for your posts to the Dev-CPP group.

However, I humbly request you to please post your messages/ replies in =
PLAIN TEXT, as it becomes a *pain* otherwise to read...

TIA,
Trevor

[Dev-C++] Can Dev-C++ do registers and interrupts?

[Jack C. <jac...@ya...>]

Hi,
    Can Dev-C++ do registers and interrupts? If it can, which libraries
should I include? I need to compile codes that contain stuff like _AX,
geninterrupt(), and Mode 0x13, etc. It's for DOS grahpics programming.

Thanks.

Jack

______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca

[Dev-C++] Project will not compile

[Michael K. <mic...@ho...>]

Hi,
I have a problem compiling(using the default settings for the compiler).
What should I do about this?


g++.exe: cannot specify -o with -c or -S and multiple compilations

make.exe: *** [GreetingsImpl.o] Error 1

Execution terminated



Thanks in advance for any help.
/Michael





_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE* 
http://join.msn.com/?page=features/junkmail

Re: [Dev-C++] [?] Difference between output formatting styles

[<ri...@te...>]

nada escribi=F3:

>
> Why does Dev-C++ compile the following just fine:
>
>         cout.setf(ios::fixed,ios::floatfield);
>         cout.setf(ios::showpoint);
>         cout<<setprecision(2)<<number<<endl;
>
> yet yields a "fixed undeclared" error on:
>
>         cout<<fixed<<showpoint<<setprecision(2)<<number<<endl;

You must use setiosflags( ) if you want to use stream manipulators. For=20
using two or more manipulators you must bit OR the flags:

cout << setiosflags(ios::fixed  |ios::showpoint) << setprecision(2) <<=20
number << endl;

By the way, the "fixed undeclarer" error means that gcc treats "fixed"=20
as a variable which wasn=B4t declared

--=20

Saludos

Ricardo Amores Hern=E1ndez
ricky QuitaEsto @ telecable.es

[Dev-C++] [?] Difference between output formatting styles

[nada <na...@ca...>]

Why does Dev-C++ compile the following just fine:

         cout.setf(ios::fixed,ios::floatfield);
         cout.setf(ios::showpoint);
         cout<<setprecision(2)<<number<<endl;

yet yields a "fixed undeclared" error on:

         cout<<fixed<<showpoint<<setprecision(2)<<number<<endl;

Both include <iomanip>.

It seems that most textbooks use the last style.  Deitel & Deitel is the 
only text I have here that uses the first style.   I am using a newer text 
by Malik which claims to be ANSI/ISO compliant.  It uses the first 
style.  And says the last style is Standard C++.

What's up?

TIA.


{rb}
--
The quickest way to double your money is to fold it in half and put it back 
in your pocket.

[Dev-C++] how to define a macro

[Pierre R. <pie...@wa...>]

Hello,

I want to define a macro in the makefile, something like:
SPECIALFILE=3Dfoo

I try to put it in a file that is included in the makefile.win, but the =
"include" line is included after the "all" dependency line, so the macro =
is evaluated to a null value.

Any idea?

Thanks.

Pierre Raoul

RE: Re: [Dev-C++] flex/bison

[Pierre R. <pie...@wa...>]

Erwan,

Your information was very helpful.

Thanks

Pierre

"erwan ancel" <erw...@fr...> on Thu, 6 Mar 2003 20:59:52 +0100 =
wrote:

> I use flex and bison with Dev-Cpp, and I just used a custom=20
> makefile to add
> these dependencies. two targets defined in Dev-Cpp are used:=20
> all-before and
> clean-custom
>=20
> this is my sample custom makefile:
>=20
>=20
>=20
> all-before:: build/lex.yy.cc build/yaccfile.cpp
>=20
> build/lex.yy.cc: parser.lex build/yaccfile.cpp
>     flex -obuild/lex.yy.cc parser.lex
>=20
> build/yaccfile.cpp: parser.yacc
>     bison -d -obuild/yaccfile.cpp parser.yacc
>=20
> clean-custom::
>     rm -f build/lex.yy.cc build/yaccfile.cpp build/yaccfile.hpp
=20

Re: [Dev-C++] start make from other editor

[Luigi S. <gi...@li...>]

On Fri, Mar 07, 2003 at 01:55:13PM +0100, J?rg Krein wrote:
> Hello,
> [..]
> Though I like the Dev-C++ IDE, I would prefer to work with the 
> editor  I'm used to (MED). 
> Unfortunately trying to invoke make out of my editor gives me an error:
> [..] 
> Seems like make tries to call the preprocessor, compiler.. but can't start
> another programm/process?
> I can see batch files in my TEMP directory created by make.
> Calling make out of the comand line works.
> What goes wrong here?
> 
> Regards,
> 
> Joerg Krein

Well it's hard to tell, especially when one does not
use the "MED" editor. Anyway, I'll attempt to say something 
hopefully correct :-)

Sometime ago, I've successfully used Make, from within another editor,
on Windows98 (the editor was ConText); one thing I noticed was that
I defined the external command invoking Make, without giving the path
of the command, but using only its name. I could have used the path as
well, but I discovered that since the compiler (MinGW 2.95) was likely
to be run by Make, and it is made of different modules (allow me to
pretend things to be as simple as this: preprocessor and compiler),
if I had not included in the path the directory where the compiler
and the preprocessor lived, compilation could not be carried out.
Let me make it a little clearer. ConText may be started from:
 - Windows by clicking on its icon
 - Dos window by giving its name on the command line

When I used the second option, ConText seemed to inherit the "path"
I had defined (which on Win98 has the scope of the Dos window one
works in) at the time the editor was launched. So as I used both
Dev-C++ and BC++, I defined the path to none of them in my "autoexec.bat",
but rather appended the needed directory to the path prior of launching
the editor. Using two Dos windows, with different paths and two instances
of the editor (one from each Dos window), I could have two different 
compiler running at the same time. Of course, this is the piece which
could be of help to you, when I omitted to add the directory of any 
compiler to the path prior to starting ConText, I received an error
message when attempting to compile from within the editor (can't 
remember how it spelled). So, I would try adding the directory with
MinGW compiler (I mean the one where binaries are located) to your
"autoexec.bat" and then (... after rebooting the machine) attempt
to run Make from your editor.  

Hope my English is clear enough.
-- 
>> gisan >>
Your true value depends entirely on what you are compared with.

RES: [Dev-C++] String encoding between Server-Client connection

[Daniel K. O. <dan...@ya...>]

Try encoding your strings in UTF-8, there are many libraries that can do the
job for you (like GLib).



Daniel K. O.




 >  -----Mensagem original-----
 >  De: dev...@li...
 >  [mailto:dev...@li...]Em nome de Jonathan M.
 >  Gumaroy
 >  Enviada em: sexta-feira, 7 de março de 2003 03:47
 >  Para: dev...@li...
 >  Assunto: [Dev-C++] String encoding between Server-Client connection
 >
 >
 >
 >  Hello Gurus,
 >
 >  For days, I have been trying to find a solution about
 >  a bug on my prototype. As all of you can see, the Client
 >  is a VC++ implementation that sends a japanese message
 >  string to a Linux C++ Server. The connection seems correct but
 >  during the time I try to display the string message, it
 >  is corrupted. Please take note that both OS supports
 >  Japanese encoding as its default locale. When sending back
 >  the string message to the VC++ Client, the Japanese string
 >  message is displayed correctly. My guess is that Linux can't
 >  handle Window's Japanese encoding (SJIS). Does any of you
 >  encountered the same problem before? It would be a great
 >  help for me for any information from you. :)
 >
 >  Thank you very much.
 >
 >  --
 >  Jonathan.

_______________________________________________________________________
Busca Yahoo!
O serviço de busca mais completo da Internet. O que você pensar o Yahoo! encontra.
http://br.busca.yahoo.com/

Re: [Dev-C++] String encoding between Server-Client connection

[Daniel G. <sp...@ho...>]

I didn;t get any code with this file.

Are you always using Unicode? That is an important factor.




>From: "Jonathan M. Gumaroy" <jgu...@nt...>
>To: dev...@li...
>Subject: [Dev-C++] String encoding between Server-Client connection
>Date: Fri, 07 Mar 2003 14:47:06 +0800
>
>
>Hello Gurus,
>
>For days, I have been trying to find a solution about
>a bug on my prototype. As all of you can see, the Client
>is a VC++ implementation that sends a japanese message
>string to a Linux C++ Server. The connection seems correct but
>during the time I try to display the string message, it
>is corrupted. Please take note that both OS supports
>Japanese encoding as its default locale. When sending back
>the string message to the VC++ Client, the Japanese string
>message is displayed correctly. My guess is that Linux can't
>handle Window's Japanese encoding (SJIS). Does any of you
>encountered the same problem before? It would be a great
>help for me for any information from you. :)
>
>Thank you very much.
>
>--
>Jonathan.
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger 
>for complex code. Debugging C/C++ programs can leave you feeling lost and 
>disoriented. TotalView can help you find your way. Available on major UNIX 
>and Linux platforms. Try it free. www.etnus.com
>_______________________________________________
>Dev-cpp-users mailing list
>Dev...@li...
>TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
>https://lists.sourceforge.net/lists/listinfo/dev-cpp-users


_________________________________________________________________
It's fast, it's easy and it's free. Get MSN Messenger today! 
http://messenger.msn.co.uk

[Dev-C++] start make from other editor

[<joe...@im...>]

Hello,

I post this a second (and last) time, thankful for any hints:

Though I like the Dev-C++ IDE, I would prefer to work with the 
editor  I'm used to (MED). 
Unfortunately trying to invoke make out of my editor gives me an error:

process_easy: DuplicateHandle(In) failed (e=6)

Seems like make tries to call the preprocessor, compiler.. but can't start
another programm/process?
I can see batch files in my TEMP directory created by make.
Calling make out of the comand line works.
What goes wrong here?

Regards,

Joerg Krein

Re: [Dev-C++] This is a linker error! It's a generic problem in your source files.

[Ioannis V. <no...@ho...>]

-------Original Message-------=0D
 =0D
From: bad...@ju...=0D
Date: =D0=E1=F1=E1=F3=EA=E5=F5=DE, 7 =CC=DC=F1=F4=E9=EF=F2 2003 11:01:33 =
=F0=EC=0D
To: dev...@li...=0D
Subject: [Dev-C++] This is a linker error! It's a generic problem in your
source files.=0D
 =0D
this is my code which is named samp2.c:=0D
=0D
=0D
#include <stdio.h>=0D
=0D
/* For system() */=0D
=3D=3D> #include <stdlib.h>=0D
=0D
=0D
=0D
int main()=0D
{=0D
printf("Hello\n");=0D
=0D
system("PAUSE");=0D
return 0;=0D
}=0D
=0D
=0D
I am having problems with compiling my code. After clicking on compile an=
d
then clicking run and get the following messege "Source file not compiled=
=2E"
The compiler log tab shows the following:=0D
=0D
=0D
=0D
=0D
Ioannis Vranos=0D
=0D
* Programming pages: http://www.noicys.freeurl.com=0D
* Alternative URL: http://run.to/noicys=20

[Dev-C++] This is a linker error! It's a generic problem in your source files.

[<bad...@ju...>]

this is my code which is named samp2.c:


#include <stdio.h>

int main()
{
printf("Hello\n");

system("PAUSE");
return 0;
}


I am having problems with compiling my code.  After clicking on compile and then clicking run and get the following messege "Source file not compiled."  The compiler log tab shows the following:
Compiler: Default compiler
Executing  gcc.exe...
gcc.exe "C:\samp2.c" -o "C:\samp2.exe"   -ansi -traditional-cpp -w -fno-access-control -fdollar-in-identifiers -fsave-memoized -fexceptions -fverbose-asm -O3 -pg -lobjc -g3  -I"C:\Dev-Cpp\include"   -L"C:\Dev-Cpp\lib" -L"C:\GccAshWare\gcc-m68k-ashware\lib"
C:\Dev-Cpp\Bin\..\lib\gcc-lib\mingw32\3.2\tradcpp0.exe: invalid option `-std=c89'

Execution terminated

The compiler tab shows the following:
Line:    \Dev-Cpp\Bin\..\lib\gcc-lib\mingw32\3.2\tradcpp0.exe 
File:    C:\C
Message: invalid option `-std=c89'


when i click on this messege I get the following:
"This is a linker error!  It's a generic problem in your source files.


Can anyone help fix this problem. thanks

[Dev-C++] link error

[<Ba...@ao...>]

I am having problems with compiling my code.  After clicking on compile and 
then clicking run and get the following messege "Source file not compiled."  
The compiler log tab shows the following:
       Compiler: Default compiler
Executing  g++.exe...
g++.exe "C:\Dev-Cpp\bin\hello.cpp" -o "C:\Dev-Cpp\bin\hello.exe"   -ansi 
-traditional-cpp -w -fno-access-control -fdollar-in-identifiers 
-fsave-memoized -fexceptions -fverbose-asm -O3 -pg -lobjc -g3  
-I"C:\Dev-Cpp\include"  -I"C:\GccAshWare\gcc-m68k-ashware\include"  
-I"C:\Dev-Cpp\include\c++"  -I"C:\Dev-Cpp\include"  
-I"C:\GccAshWare\gcc-m68k-ashware\include"   -L"C:\Dev-Cpp\lib" 
-L"C:\GccAshWare\gcc-m68k-ashware\lib"
cc1plus.exe: unrecognized option `-fdollar-in-identifiers'
Execution terminated


The compiler tab shows the following:
Line:      cc1plus.exe
File:      C:\Dev-Cpp\bin\cc1plus.exe
Message:unrecognized option -fdollar-in-identifiers'



Can anyone help fix this problem. thanks