[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Roland H. <r....@ma...>]

ddccontrol version 1.0.3
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Detected monitors :
 - Device: dev:/dev/i2c-5
   DDC/CI supported: Yes
   Monitor Name: Samsung SyncMaster 173P Plus (VGA)
   Input type: Digital
  (Automatically selected)
 - Device: dev:/dev/i2c-0
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Digital
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-5...

EDID readings:
	Plug and Play ID: SAM0196 [Samsung SyncMaster 173P Plus (VGA)]
	Input type: Analog

Capabilities:
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
Capabilities read fail.

Controls (valid/current/max) [Description - Value name]:
Control 0x01: +/128/255   [???]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1 C [Restore Factory Default Geometry]
Control 0x07: +/3/3   [???]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0e: +/80/160 C [Image Lock Coarse (Clock)]
Control 0x10: +/100/100 C [Brightness]
Control 0x12: +/100/100 C [Contrast]
Control 0x16: +/31/64 C [Red maximum level]
Control 0x18: +/24/64 C [Green maximum level]
Control 0x1a: +/20/64 C [Blue maximum level]
Control 0x1e: +/0/2 C [Automatically adjust]
Control 0x20: +/50/100 C [Horizontal Position]
Control 0x30: +/35/70 C [Vertical Position]
Control 0x3e: +/0/31 C [Image Lock Fine (Clock Phase)]
Control 0x60: +/1/3 C [Input Source Select (Main) - Analog]
Control 0x62: +/25/50   [???]
Control 0x6c: +/128/255   [???]
Control 0x6e: +/128/255   [???]
Control 0x70: +/128/255   [???]
Control 0x87: +/15/25 C [Sharpness]
Control 0xb0: +/0/2 C [Settings]
Control 0xb6: +/3/8 C [???]
Control 0xc6: +/1/1 C [???]
Control 0xc8: +/5/16 C [???]
Control 0xc9: +/1/0 C [???]
Control 0xca: +/2/2 C [On Screen Display - Enable]
Control 0xcc: +/2/11   [???]
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdc: +/6/6 C [Magic Bright Mode - Custom]
Control 0xdf: +/512/0 C [???]
Control 0xe0: +/1/9 C [Color Preset - Warm1]
Control 0xe1: +/1/1 C [Power control - On]
Control 0xe2: +/0/1 C [Autoselect Input Source - Automatic]
Control 0xed: +/100/100   [???]
Control 0xee: +/100/100   [???]
Control 0xef: +/100/100   [???]
Control 0xf0: +/0/4 C [MagicColor - Off]
Control 0xf2: +/3/8 C [Gamma - 0]
Control 0xf8: +/0/3 C [???]
Control 0xf9: +/50/100 C [???]
Control 0xfa: +/50/100 C [???]
Control 0xfb: +/128/255 C [???]
Control 0xfc: +/11/30 C [???]