[ddccontrol-users] ddc control warning and asking for response from terminal

[Gmail P. <dam...@gm...>]

Hi and thanks a lot for the job you've done,

There is the response from the command the software ask me to type in my 
terminal (LANG= LC_ALL= ddccontrol -p -c -d)


#### START ####

ddccontrol version 0.6.0
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU 
General Public License.

Detected monitors :
  - Device: dev:/dev/i2c-2
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Digital
   (Automatically selected)
  - Device: dev:/dev/i2c-6
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Digital
  - Device: dev:/dev/i2c-7
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Digital
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-2...
I/O warning : failed to load external entity 
"/usr/share/ddccontrol-db/monitor/AUS24DA.xml"
Document not parsed successfully.

EDID readings:
     Plug and Play ID: AUS24DA [VESA standard monitor]
     Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
Capabilities read fail.

Controls (valid/current/max) [Description - Value name]:
Control 0x04: +/0/1   [???]
Control 0x1a: +/75/100   [???]
Control 0x6c: +/128/255   [???]


#### END ####

Even if my screens seems to be not fully managed by the software,

I can access to the controls which interest me, as the brightness and 
contrast control

Thanks again for your work


Best regards,