[ddccontrol-users] Unsupported Monitor - Requested

[Casper <cas...@pr...>]

Hello DDCC Developers,

As per your request, I have run the command in Terminal.

The output is as follows:

> ddccontrol version 0.6.0
> Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
> Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
> This program comes with ABSOLUTELY NO WARRANTY.
> You may redistribute copies of this program under the terms of the GNU General Public License.
>
> Detected monitors :
> - Device: dev:/dev/i2c-9
> DDC/CI supported: Yes
> Monitor Name: VESA standard monitor
> Input type: Digital
> (Automatically selected)
> Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-9...
> I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/AUS25A4.xml"
> Document not parsed successfully.
>
> EDID readings:
> Plug and Play ID: AUS25A4 [VESA standard monitor]
> Input type: Analog
> =============================== WARNING ===============================
> There is no support for your monitor in the database, but ddccontrol is
> using a basic generic profile. Many controls will not be supported, and
> some controls may not work as expected.
> Please update ddccontrol-db, or, if you are already using the latest
> version, please send the output of the following command to
> ddc...@li...:
>
> LANG= LC_ALL= ddccontrol -p -c -d
>
> Thank you.
> =============================== WARNING ===============================
>
> Capabilities:
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> ioctl(): Inappropriate ioctl for device
> ioctl returned -1
> Capabilities read fail.
>
> Controls (valid/current/max) [Description - Value name]:
> Control 0x02: +/1/2 C [New Control Value - No changes]
> Control 0x04: +/0/1 C [Restore Factory Defaults]
> Control 0x05: +/0/1 C [Restore Brightness and Contrast]
> Control 0x08: +/0/1 C [Restore Factory Default Color]
> Control 0x0b: +/2100/65535 [???]
> Control 0x0c: +/6/11 [???]
> Control 0x10: +/0/100 C [Brightness]
> Control 0x12: +/100/100 C [Contrast]
> Control 0x14: +/6/11 C [???]
> Control 0x16: +/100/100 C [Red maximum level]
> Control 0x18: +/88/100 C [Green maximum level]
> Control 0x1a: +/100/100 C [Blue maximum level]
> Control 0x52: +/0/255 C [???]
> Control 0x60: +/15/20 C [Input Source Select (Main)]
> Control 0x62: +/100/100 C [Audio Speaker Volume Adjust]
> Control 0x6c: +/50/100 [???]
> Control 0x6e: +/50/100 [???]
> Control 0x70: +/50/100 [???]
> Control 0x86: +/2/12 C [???]
> Control 0x87: +/40/100 C [???]
> Control 0x8a: +/50/100 C [???]
> Control 0x8d: +/2/2 C [???]
> Control 0xa8: +/1/3 [???]
> Control 0xac: +/62428/2 C [???]
> Control 0xae: +/16550/65535 C [???]
> Control 0xb0: +/1/2 [???]
> Control 0xb5: +/0/1 [???]
> Control 0xb6: +/3/5 C [???]
> Control 0xc6: +/131/255 C [???]
> Control 0xc8: +/5/65302 C [???]
> Control 0xc9: +/0/0 [???]
> Control 0xcc: +/2/49 C [???]
> Control 0xd6: +/1/4 C [DPMS Control - On]
> Control 0xdc: +/17/36 C [???]
> Control 0xdf: +/514/65535 C [???]
> Control 0xe0: +/2/3 C [???]
> Control 0xe1: +/0/2 C [Power control - Off]
> Control 0xe2: +/0/100 C [???]
> Control 0xe3: +/0/100 C [???]
> Control 0xe4: +/0/1 C [???]
> Control 0xe5: +/0/1 [???]
> Control 0xe6: +/1/1 C [???]
> Control 0xe7: +/0/255 C [???]
> Control 0xe9: +/0/1 C [???]
> Control 0xea: +/1/1 C [???]
> Control 0xeb: +/0/1 C [???]

I am using Linux Mint 21.2.
Brightness & Contrast adjustment work fine, no other features are available for me to adjust.

If your require more information, please don't hesitate to contact me through this e-mail,
and I shall reply as soon as I can.

Kind Regards,
C.Ineditus