[ddccontrol-users] Sceptre C355W-3440UN not supported by ddccontrol / gddccontrol

[Jeff G <gan...@gm...>]

My monitor seems to have limited support with ddccontrol and I received the
prompt in opening gddccontrol to send the output of "sudo LANG= LC_ALL=
ddccontrol -p -c -d" to this email, so have included it below. I've also
attached it as a text file in case email does anything to the formatting.

Regards,
Jeff Gannon

=====================================

sudo LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.4
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors.....I/O warning : failed to load external
entity "/usr/share/ddccontrol-db/monitor/SPT0DB7.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/SPTlcd.xml"
Document not parsed successfully.
.....
Detected monitors :
 - Device: dev:/dev/i2c-4
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Digital
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-4...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/SPT0DB7.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/SPTlcd.xml"
Document not parsed successfully.

EDID readings:
Plug and Play ID: SPT0DB7 [VESA standard monitor]
Input type: Digital
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (prot(monitor)type(lcd)MStarcmds(01 02 03 07 0C E3 F3)vcp(02 04
05 08 10 12 14(05 08 0B 0C) 16 18 1A 52 60( 11 12 0F) AA(01 02) AC AE B2 B6
C6 C8 C9 D6(01 04 05) DC(00 02 03 05 ) DF FD)mccs_ver(2.1)mswhql(1))
Parsed output:
VCP: 02 04 05 08 10 12 14 16 18 1a 52 60 aa ac ae b2 b6 c6 c8 c9 d6 dc df
fd
Type: LCD

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/1/2 C [Secondary Degauss - Secondary Degauss]
Control 0x04: +/0/255 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/255   [???]
Control 0x08: +/0/255 C [Restore Factory Default Color]
Control 0x0b: +/0/24028   [???]
Control 0x0c: +/2/255   [???]
Control 0x0e: +/50/100   [???]
Control 0x10: +/34/100 C [Brightness]
Control 0x12: +/49/100 C [Contrast]
Control 0x14: +/12/12 C [???]
Control 0x16: +/50/100 C [Red maximum level]
Control 0x18: +/50/100 C [Green maximum level]
Control 0x1a: +/50/100 C [Blue maximum level]
Control 0x1e: +/0/2   [???]
Control 0x20: +/0/100   [???]
Control 0x30: +/0/100   [???]
Control 0x3e: +/50/100   [???]
Control 0x52: +/0/255 C [???]
Control 0x60: +/15/14 C [Input Source Select (Main)]
Control 0x68: +/0/5   [???]
Control 0x6c: +/50/255   [???]
Control 0x6e: +/50/255   [???]
Control 0x70: +/50/255   [???]
Control 0xa8: +/0/3   [???]
Control 0xaa: +/1/255 C [OSD Orientation - Landscape]
Control 0xac: +/17028/2 C [???]
Control 0xae: +/10000/0 C [???]
Control 0xb2: +/1/8 C [???]
Control 0xb4: +/1/2   [???]
Control 0xb6: +/3/5 C [???]
Control 0xc0: +/2966/65535   [???]
Control 0xc6: +/17868/65535 C [???]
Control 0xc8: +/22021/0 C [???]
Control 0xc9: +/0/65535 C [???]
Control 0xca: +/2/2   [???]
Control 0xd6: +/1/255 C [DPMS Control - On]
Control 0xdc: +/0/255 C [???]
Control 0xdf: +/513/255 C [???]
Control 0xe3: +/0/1   [???]
Control 0xed: +/1/1   [???]
Control 0xfa: +/0/65535   [???]
Control 0xfd: +/99/65535 C [???]