[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Luke M. <luk...@gm...>]

Hello! My monitors are both ASUS: VP249QGR and VS248H-P

I installed your software from source on Manjaro Linux OS, kernel version
5.12.8.
Here is the output from the command requested by your software:


ddccontrol version 0.5.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Detected monitors :
 - Device: dev:/dev/i2c-7
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Digital
  (Automatically selected)
 - Device: dev:/dev/i2c-6
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Digital
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-7...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/AUS24AF.xml"
Document not parsed successfully.

EDID readings:
Plug and Play ID: AUS24AF [VESA standard monitor]
Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
ioctl(): Inappropriate ioctl for device
ioctl returned -1
Capabilities read fail.

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/1/2 C [New Control Value - No changes]
Control 0x03: +/0/5   [???]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1 C [Restore Factory Default Geometry]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0b: +/100/0   [???]
Control 0x0c: +/35/63   [???]
Control 0x0e: +/50/100   [???]
Control 0x10: +/90/100 C [Brightness]
Control 0x12: +/80/100 C [Contrast]
Control 0x14: +/11/12 C [???]
Control 0x16: +/100/100 C [Red maximum level]
Control 0x18: +/100/100 C [Green maximum level]
Control 0x1a: +/100/100 C [Blue maximum level]
Control 0x1e: +/0/1   [???]
Control 0x1f: +/1/1   [???]
Control 0x20: +/1/1   [???]
Control 0x30: +/1/1   [???]
Control 0x3e: +/1/1   [???]
Control 0x52: +/0/255 C [???]
Control 0x60: +/15/18 C [Input Source Select (Main)]
Control 0x62: +/50/100 C [Audio Speaker Volume Adjust]
Control 0x87: +/60/100   [???]
Control 0x8d: +/0/1 C [???]
Control 0xac: +/2264/1 C [???]
Control 0xae: +/6000/65535 C [???]
Control 0xb2: +/1/1   [???]
Control 0xb6: +/3/5 C [???]
Control 0xc0: +/1569/65535 C [???]
Control 0xc6: +/131/65535 C [???]
Control 0xc8: +/9481/37 C [???]
Control 0xc9: +/1/65535 C [???]
Control 0xca: +/1/2   [???]
Control 0xcc: +/2/49 C [???]
Control 0xd6: +/1/5 C [DPMS Control - On]
Control 0xdf: +/513/65535 C [???]
Control 0xe6: +/0/0   [???]
Control 0xfd: +/0/0   [???]

Let me know if there is any additional information I can provide that might
be helpful in maintaining your software.

Thanks!