[ddccontrol-users] (no subject)

[Keegan T. <kee...@gm...>]

kcterry@Pulse:~$ sudo LANG= LC_ALL= ddccontrol -p -c -d
[sudo] password for kcterry:
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors..I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/DEL5002.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/DELcrt.xml"
Document not parsed successfully.
.
Detected monitors :
 - Device: pci:01:00.0-2
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:01:00.0-2...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/DEL5002.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/DELcrt.xml"
Document not parsed successfully.

EDID readings:
    Plug and Play ID: DEL5002 [VESA standard monitor]
    Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (prot(monitor)  type(crt) model(DEL0250 )          edid
bin(128(################################################################################################################################))cmds(0102030405060C)
vcp(000104060810121416181A20222426283032384042445456686C6E70E0E2F1F2F3F4F5F6F7))
Parsed output:
    VCP: 00 01 04 06 08 10 12 14 16 18 1a 20 22 24 26 28 30 32 38 40 42 44
54 56 68 6c 6e 70 e0 e2 f1 f2 f3 f4 f5 f6 f7
    Type: CRT

Controls (valid/current/max) [Description - Value name]:
Control 0x00: +/0/0 C [Degauss]
Control 0x01: +/0/0 C [???]
Control 0x04: +/0/0 C [Restore Factory Defaults]
Control 0x06: +/0/0 C [Restore Factory Default Geometry]
Control 0x08: +/0/0 C [Restore Factory Default Color]
Control 0x10: +/142/255 C [Brightness]
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
Control 0x12: +/217/255 C [Contrast]
Control 0x14: +/2/2 C [???]
Control 0x16: +/255/255 C [Red maximum level]
Control 0x18: +/237/255 C [Green maximum level]
Control 0x1a: +/215/255 C [Blue maximum level]
Control 0x20: +/166/255 C [Horizontal Position]
Control 0x22: +/189/255 C [Horizontal Size]
Control 0x24: +/106/255 C [Horizontal Pincushion]
Control 0x26: +/118/255 C [Horizontal Pincushion Balance]
Control 0x28: +/128/255 C [Horizontal Misconvergence]
Invalid response, corrupted data - xor is 0x08, length 0x08
6e 88 02 09 2a 00 ff ff ff ff 9f                | n...*......
Control 0x30: +/126/255 C [Vertical Position]
Control 0x32: +/104/255 C [Vertical Size]
Control 0x38: +/128/255 C [Vertical Misconvergence]
Control 0x40: +/122/255 C [Parallelogram Distortion (Key Balance)]
Control 0x42: +/109/255 C [Trapezoidal Distortion (Key)]
Control 0x44: +/141/255 C [Rotation (Tilt)]
Control 0x54: +/172/240 C [Color temperature]
Control 0x56: +/0/255 C [Horizontal Moire]
Invalid response, corrupted data - xor is 0x08, length 0x08
6e 88 0a 01 5b 00 ff ff ff ff ee                | n...[......
Control 0x68: +/0/8 C [???]
Control 0x6c: +/204/255 C [Red minimum level]
Control 0x6e: +/204/255 C [Green minimum level]
Control 0x70: +/204/255 C [Blue minimum level]
Invalid response, corrupted data - xor is 0x04, length 0x08
6e 88 02 05 71 00 ff ff ff ff c4                | n...q......
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
Invalid response, corrupted data - xor is 0x10, length 0x08
6e 88 02 11 c5 00 ff ff ff ff 70                | n.........p
Control 0xe0: +/0/0 C [???]
Control 0xe2: +/0/0 C [???]
Control 0xf1: +/128/255 C [???]
Control 0xf2: +/128/255 C [???]
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0xf3: +/128/255 C [???]
Control 0xf4: +/128/255 C [???]
Control 0xf5: +/0/3 C [???]
Control 0xf6: +/146/255 C [???]
Control 0xf7: +/103/255 C [???]