Re: [ddccontrol-users] (no subject)

[Michael M. <sim...@gm...>]

re-ran as root and here is what I got:

ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitorsI/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/HIQ500E.xml"
Document not parsed successfully.
.
Detected monitors :
 - Device: pci:01:00.0-0
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:01:00.0-0...
Invalid response, first byte is 0x51, should be 0x6e
0000: 51 83 f3 00 40 0f 31 20 33 29 31 34 28 35 38 42 | Q...@.1 3)14(58B
0010: 29 41 43 41 45 10 45 29 37 00 00 00 00 00 00 00 | )ACAE.E)7.......
0020: 00 00 00 00 00 00 00 00 03 26 10 f2 00 ff 01 00 | .........&......
0030: 00 ff 02 58 5a 78 00 00 00 00 0d 00 00 00 45 00 | ...XZx........E.
0040: 00 41 00                                        | .A.
sendbytes: error - bailout.
Error while reading write message answer: Bad message
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/HIQ500E.xml"
Document not parsed successfully.

EDID readings:
    Plug and Play ID: HIQ500E [VESA standard monitor]
    Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
Raw output: (type(LCD)vcp(02DF101216181A20300E3E1E0405060860(1
3)14(58B)ACAEB6C0C6C8C9D6(14)DC(1234)FAFBFCFDFE)
Parsed output:
    VCP: 02 04 05 06 08 0e 10 12 14 16 18 1a 1e 20 30 3e 60 ac ae b6 c0 c6
c8 c9 d6 dc df fa fb fc fd fe
    Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/255/255 C [???]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1 C [Restore Factory Default Geometry]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0e: +/49/100 C [Image Lock Coarse (Clock)]
Control 0x10: +/150/250 C [Brightness]
Control 0x12: +/120/150 C [Contrast]
Control 0x14: +/11/13 C [???]
Control 0x16: +/90/180 C [Red maximum level]
Control 0x18: +/90/180 C [Green maximum level]
Control 0x1a: +/90/180 C [Blue maximum level]
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0x1e: +/0/2 C [Automatically adjust]
Control 0x20: +/102/255 C [Horizontal Position]
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0x30: +/28/38 C [Vertical Position]
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0x3e: +/48/63 C [Image Lock Fine (Clock Phase)]
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0x60: +/1/3 C [Input Source Select - Analog]
Invalid response, first byte is 0x51, should be 0x6e
51 82 01 61 dd 00 00 03 00 01 ff                | Q..a.......
Control 0x68: +/0/11   [???]
Invalid response, first byte is 0x51, should be 0x6e
51 82 01 6a d6 00 00 0b 00 00 ff                | Q..j.......
Invalid response, first byte is 0x51, should be 0x6e
51 82 01 77 cb 00 00 0b 00 00 ff                | Q..w.......
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0xac: +/48380/65280 C [???]
Control 0xae: +/5990/65535 C [???]
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0xb6: +/3/8 C [???]
Invalid response, first byte is 0x51, should be 0x6e
51 82 01 b9 05 00 00 08 00 03 ff                | Q..........
Control 0xc0: +/4338/65535 C [???]
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
Control 0xc6: +/49/49 C [???]
Control 0xc8: +/5/16 C [???]
Control 0xc9: +/256/272 C [???]
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdc: +/4/4 C [???]
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Control 0xdf: +/512/512 C [???]
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
sendbytes: error - bailout.
Error while reading write message answer: Bad message
Invalid response, first byte is 0x51, should be 0x6e
51 82 01 ee 52 00 00 00 00 00 ff                | Q...R......
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
Control 0xfa: +/0/2 C [???]
Control 0xfb: +/60/255 C [???]
Control 0xfc: +/0/65535 C [???]
Control 0xfd: +/0/65535 C [???]
i2c-algo-bit.o: readbytes: i2c_inb timed out.
Error while reading read message answer: Bad message
Control 0xfe: +/0/4 C [???]


On Sat, Aug 2, 2008 at 12:27 PM, Michael Mann <sim...@gm...>wrote:

> I ran it using sudo under Ubuntu.  It's a Hyundai L91A 19" flat panel
> monitor.
>
> On Sat, Aug 2, 2008 at 10:39 AM, Roberto C. Sánchez <ro...@co...>wrote:
>
>> On Sat, Aug 02, 2008 at 01:10:05AM -0400, Michael Mann wrote:
>> > Attached is the output resulting from issuing this command in Ubuntu
>> 8.04-1:
>> >
>> > LANG= LC_ALL= ddccontrol -p -c -d
>> >
>> >
>>
>> First, did you run it as root?  Second, what make/model/etc of monitor?
>>
>> Regards,
>>
>> -Roberto
>>
>> --
>> Roberto C. Sánchez
>> http://people.connexer.com/~roberto<http://people.connexer.com/%7Eroberto>
>> http://www.connexer.com
>>
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.6 (GNU/Linux)
>>
>> iD8DBQFIlHGf5SXWIKfIlGQRAhbHAJ4k25VI0Q9l/kvrD255HZBQWPolEACeOFyf
>> 9SjWWP+bnJ9SaX7Hr12+t9Q=
>> =UWUv
>> -----END PGP SIGNATURE-----
>>
>>
>