Re: [ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

I would also need to know the manufacturer/model of the monitor for this
to be useful.

Regards,

-Roberto

On Fri, Mar 28, 2008 at 01:40:00AM -0500, Ed Bennett wrote:
> foouser@K2:~$ sudo LANG= LC_ALL= ddccontrol -p -c -d
> ddccontrol version 0.4.2
> Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
> Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
> This program comes with ABSOLUTELY NO WARRANTY.
> You may redistribute copies of this program under the terms of the GNU General
> Public License.
> 
> Probing for available monitors.I/O warning : failed to load external entity
> "/usr/share/ddccontrol-db/monitor/GWY08ED.xml"
> Document not parsed successfully.
> ..
> Detected monitors :
>  - Device: pci:02:00.0-1
>    DDC/CI supported: Yes
>    Monitor Name: VESA standard monitor
>    Input type: Analog
>   (Automatically selected)
> Reading EDID and initializing DDC/CI at bus pci:02:00.0-1...
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> I/O warning : failed to load external entity
> "/usr/share/ddccontrol-db/monitor/GWY08ED.xml"
> Document not parsed successfully.
> 
> EDID readings:
> 	Plug and Play ID: GWY08ED [VESA standard monitor]
> 	Input type: Analog
> =============================== WARNING ===============================
> There is no support for your monitor in the database, but ddccontrol is
> using a basic generic profile. Many controls will not be supported, and
> some controls may not work as expected.
> Please update ddccontrol-db, or, if you are already using the latest
> version, please send the output of the following command to
> ddc...@li...:
> 
> LANG= LC_ALL= ddccontrol -p -c -d
> 
> Thank you.
> =============================== WARNING ===============================
> 
> Capabilities:
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Capabilities read fail.
> 
> Controls (valid/current/max) [Description - Value name]:
> Control 0x02: +/2/65535   [???]
> Control 0x05: +/0/65535   [???]
> Control 0x06: +/0/1   [???]
> Control 0x08: +/0/65535   [???]
> Control 0x0b: +/3200/9600   [???]
> Control 0x0c: +/0/2   [???]
> Control 0x0e: +/25/60   [???]
> Control 0x10: +/100/100   [???]
> Control 0x12: +/134/255   [???]
> Control 0x14: +/11/11   [???]
> Control 0x16: +/200/200   [???]
> Control 0x18: +/200/200   [???]
> Control 0x1a: +/200/200   [???]
> Control 0x1e: +/0/65535   [???]
> Control 0x20: +/273/722   [???]
> Control 0x30: +/31/39   [???]
> Control 0x3e: +/50/63   [???]
> Control 0x60: +/1/65535   [???]
> Control 0x68: +/256/65535   [???]
> Control 0x86: +/8/8   [???]
> Control 0x95: +/65476/65535   [???]
> Control 0x96: +/0/65535   [???]
> Control 0x97: +/0/65535   [???]
> Control 0x98: +/0/65535   [???]
> Control 0x9b: +/200/200   [???]
> Control 0x9d: +/200/200   [???]
> Control 0x9f: +/200/200   [???]
> Control 0xa4: +/0/65535   [???]
> Control 0xa5: +/0/1   [???]
> Control 0xaa: +/1/65535   [???]
> Control 0xac: +/65/65535   [???]
> Control 0xae: +/60/65535   [???]
> Control 0xb6: +/3/65535   [???]
> Control 0xc0: +/3907/65535   [???]
> Control 0xc6: +/129/65535   [???]
> Control 0xc8: +/2/65535   [???]
> Control 0xc9: +/256/65535   [???]
> Control 0xca: +/2/65535   [???]
> Control 0xd6: +/1/65535   [???]
> Control 0xdf: +/513/65535   [???]
> Control 0xea: +/40/100   [???]
> Control 0xf1: +/100/200   [???]
> Control 0xf2: +/100/200   [???]
> Control 0xf3: +/50/100   [???]
> Control 0xf4: +/50/100   [???]
> Control 0xf5: +/15/15   [???]
> Control 0xf6: +/0/65535   [???]
> Control 0xf7: +/1/1   [???]
> Control 0xfa: +/0/2   [???]
> Control 0xfb: +/0/65535   [???]
> Control 0xfc: +/0/65535   [???]
> Control 0xfd: +/0/65535   [???]
> Control 0xfe: +/0/4   [???]
> foouser@K2:~$ 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Ed Bennett
> Research Specialist
> Department of Art and Technology Studies
> School of the Art Institute of Chicago
> 112 S. Michigan Ave. Rm 410
> Chicago, IL 60640
> ph 312-345-3686
> fx 312-345-3565
> sbe...@sa...
> http://sprocket.telab.artic.edu/ed
> 
> 
> 
> 
> 
> 
> 
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> ddccontrol-users mailing list
> ddc...@li...
> https://lists.sourceforge.net/lists/listinfo/ddccontrol-users

-- 
Roberto C. Sánchez
http://people.connexer.com/~roberto
http://www.connexer.com