ddccontrol-users

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[John K. <ioa...@gm...>]

Hello, i bought yesterday a Samsung SyncMaster 760BF and today i have tried
to use ddccontrol..
This is the output of LANG= LC_ALL= ddccontrol -p -c -d:

ddccontrol version 0.4.1
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors...........
Detected monitors :
 - Device: pci:02:00.0-0
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:02:00.0-0...

EDID readings:
    Plug and Play ID: SAM01E2 [VESA standard monitor]
    Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (type(LCD)vcp(04 05 06 08 0E 10 12 16 18 1A 1E 20 30 3E 60(1 3)
B0(1 2) B6 C6 C8 C9 D6(1 4) DC(1 2 3 4 5 6) DF F8 F0(0 1 2 3 4) F2 F3 87 F9
FA FB FC FD FE E0(0 1 2 3)))
Parsed output:
    VCP: 04 05 06 08 0e 10 12 16 18 1a 1e 20 30 3e 60 87 b0 b6 c6 c8 c9 d6
dc df e0 f0 f2 f3 f8 f9 fa fb fc fd fe
    Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x01: +/128/255   [???]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1 C [Restore Factory Default Geometry]
Control 0x07: +/3/3   [???]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0e: +/80/160 C [Image Lock Coarse (Clock)]
Control 0x10: +/80/100 C [Brightness]
Control 0x12: +/50/100 C [Contrast]
Control 0x16: +/32/64 C [Red maximum level]
Control 0x18: +/32/64 C [Green maximum level]
Control 0x1a: +/32/64 C [Blue maximum level]
Control 0x1e: +/0/2 C [Automatically adjust]
Control 0x20: +/47/100 C [Horizontal Position]
Control 0x30: +/35/70 C [Vertical Position]
Control 0x3e: +/7/31 C [Image Lock Fine (Clock Phase)]
Control 0x60: +/1/3 C [Input Source Select - Analog]
Control 0x62: +/25/50   [???]
Control 0x6c: +/128/255   [???]
Control 0x6e: +/128/255   [???]
Control 0x70: +/128/255   [???]
Control 0x87: +/15/25 C [???]
Control 0xb0: +/0/2 C [Settings]
Control 0xb6: +/3/8 C [???]
Control 0xc6: +/1/1 C [???]
Control 0xc8: +/5/16 C [???]
Control 0xc9: +/1/0 C [???]
Control 0xca: +/2/2   [???]
Control 0xcc: +/2/11   [???]
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdc: +/6/6 C [???]
Control 0xdf: +/512/0 C [???]
Control 0xe0: +/3/3 C [???]
Control 0xe1: +/1/1   [???]
Control 0xe2: +/0/1   [???]
Control 0xed: +/98/100   [???]
Control 0xee: +/100/100   [???]
Control 0xef: +/100/100   [???]
Control 0xf0: +/0/4 C [???]
Control 0xf2: +/0/2 C [???]
Control 0xf8: +/0/3 C [???]
Control 0xf9: +/50/100 C [???]
Control 0xfa: +/50/100 C [???]
Control 0xfb: +/128/255 C [???]
Control 0xfc: +/11/30 C [???]

And also i get this errors:

I/O warning : failed to load external entity
"/usr/local/share/ddccontrol-db/monitor/SAM01E2.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/usr/local/share/ddccontrol-db/monitor/SAM01E2.xml"
Document not parsed successfully.

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Daniel <da...@sm...>]

Samsung Syncmaster 940bf

ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU 
General Public License.

Probing for available monitorsI/O warning : failed to load external 
entity "/usr/local/share/ddccontrol-db/monitor/SAM01DF.xml"
Document not parsed successfully.
...
Detected monitors :
  - Device: pci:01:00.0-0
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Digital
   (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:01:00.0-0...
I/O warning : failed to load external entity 
"/usr/local/share/ddccontrol-db/monitor/SAM01DF.xml"
Document not parsed successfully.

EDID readings:
         Plug and Play ID: SAM01DF [VESA standard monitor]
         Input type: Digital
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (type(LCD)vcp(04 05 06 08 10 12 16 18 1A 60(1 3) 87 B0(1 2) 
B6 C6 C8 C9 D6(1 4) DC(1 2 3 4 5 6) DF F0(0 1 2 3 4) F2 F3 FA FB F9 FC 
FD FE E0(0 1 2 3)))
Parsed output:
         VCP: 04 05 06 08 10 12 16 18 1a 60 87 b0 b6 c6 c8 c9 d6 dc df 
e0 f0 f2 f3 f9 fa fb fc fd fe
         Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1 C [Restore Factory Default Geometry]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0e: +/80/160   [???]
Control 0x10: +/100/100 C [Brightness]
Control 0x12: +/50/100 C [Contrast]
Control 0x16: +/32/64 C [Red maximum level]
Control 0x18: +/32/64 C [Green maximum level]
Control 0x1a: +/32/64 C [Blue maximum level]
Control 0x1e: +/0/2   [???]
Control 0x20: +/50/100   [???]
Control 0x30: +/35/70   [???]
Control 0x3e: +/0/31   [???]
Control 0x60: +/3/3 C [Input Source Select - Digital]
Control 0x62: +/50/100   [???]
Control 0x6c: +/128/255   [???]
Control 0x6e: +/128/255   [???]
Control 0x70: +/128/255   [???]
Control 0x87: +/15/25 C [???]
Control 0x9b: +/127/253   [???]
Control 0x9c: +/127/253   [???]
Control 0x9d: +/127/253   [???]
Control 0x9e: +/127/253   [???]
Control 0x9f: +/127/253   [???]
Control 0xa0: +/127/253   [???]
Control 0xb0: +/0/2 C [Settings]
Control 0xb6: +/3/8 C [???]
Control 0xc6: +/1/1 C [???]
Control 0xc8: +/5/16 C [???]
Control 0xc9: +/1/0 C [???]
Control 0xca: +/2/2   [???]
Control 0xcc: +/2/11   [???]
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdc: +/6/5 C [???]
Control 0xdf: +/512/0 C [???]
Control 0xe0: +/3/3 C [???]
Control 0xe1: +/1/1   [???]
Control 0xe2: +/0/1   [???]
Control 0xed: +/99/255   [???]
Control 0xee: +/99/255   [???]
Control 0xef: +/99/255   [???]
Control 0xf0: +/0/4 C [???]
Control 0xf2: +/2/2 C [???]
Control 0xf3: +/1/1 C [???]
Control 0xf5: +/0/2   [???]
Control 0xf9: +/50/100 C [???]
Control 0xfa: +/50/100 C [???]
Control 0xfb: +/50/100 C [???]
Control 0xfc: +/10/20 C [???]

-- 
//Vociferous
"You can only get smarter by playing a smart opponent."

Please avoid sending me proprietary attachments such as Word or 
PowerPoint See http://www.gnu.org/philosophy/no-word-attachments.html

Re: [ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Nicolas B. <ni...@bo...>]

Add to the DB. Thanks.

Daniel wrote:
> Samsung Syncmaster 940bf
>
> ddccontrol version 0.4.2
> Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
> Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
> This program comes with ABSOLUTELY NO WARRANTY.
> You may redistribute copies of this program under the terms of the GNU 
> General Public License.
>
>
>   

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Ed B. <sbe...@sa...>]

foouser@K2:~$ sudo LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU General
Public License.

Probing for available monitors.I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/GWY08ED.xml"
Document not parsed successfully.
..
Detected monitors :
 - Device: pci:02:00.0-1
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:02:00.0-1...
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/GWY08ED.xml"
Document not parsed successfully.

EDID readings:
	Plug and Play ID: GWY08ED [VESA standard monitor]
	Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Invalid response, length is 76, should be 64 at most
Capabilities read fail.

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/2/65535   [???]
Control 0x05: +/0/65535   [???]
Control 0x06: +/0/1   [???]
Control 0x08: +/0/65535   [???]
Control 0x0b: +/3200/9600   [???]
Control 0x0c: +/0/2   [???]
Control 0x0e: +/25/60   [???]
Control 0x10: +/100/100   [???]
Control 0x12: +/134/255   [???]
Control 0x14: +/11/11   [???]
Control 0x16: +/200/200   [???]
Control 0x18: +/200/200   [???]
Control 0x1a: +/200/200   [???]
Control 0x1e: +/0/65535   [???]
Control 0x20: +/273/722   [???]
Control 0x30: +/31/39   [???]
Control 0x3e: +/50/63   [???]
Control 0x60: +/1/65535   [???]
Control 0x68: +/256/65535   [???]
Control 0x86: +/8/8   [???]
Control 0x95: +/65476/65535   [???]
Control 0x96: +/0/65535   [???]
Control 0x97: +/0/65535   [???]
Control 0x98: +/0/65535   [???]
Control 0x9b: +/200/200   [???]
Control 0x9d: +/200/200   [???]
Control 0x9f: +/200/200   [???]
Control 0xa4: +/0/65535   [???]
Control 0xa5: +/0/1   [???]
Control 0xaa: +/1/65535   [???]
Control 0xac: +/65/65535   [???]
Control 0xae: +/60/65535   [???]
Control 0xb6: +/3/65535   [???]
Control 0xc0: +/3907/65535   [???]
Control 0xc6: +/129/65535   [???]
Control 0xc8: +/2/65535   [???]
Control 0xc9: +/256/65535   [???]
Control 0xca: +/2/65535   [???]
Control 0xd6: +/1/65535   [???]
Control 0xdf: +/513/65535   [???]
Control 0xea: +/40/100   [???]
Control 0xf1: +/100/200   [???]
Control 0xf2: +/100/200   [???]
Control 0xf3: +/50/100   [???]
Control 0xf4: +/50/100   [???]
Control 0xf5: +/15/15   [???]
Control 0xf6: +/0/65535   [???]
Control 0xf7: +/1/1   [???]
Control 0xfa: +/0/2   [???]
Control 0xfb: +/0/65535   [???]
Control 0xfc: +/0/65535   [???]
Control 0xfd: +/0/65535   [???]
Control 0xfe: +/0/4   [???]
foouser@K2:~$ 









Ed Bennett
Research Specialist
Department of Art and Technology Studies
School of the Art Institute of Chicago
112 S. Michigan Ave. Rm 410
Chicago, IL 60640
ph 312-345-3686
fx 312-345-3565
sbe...@sa...
http://sprocket.telab.artic.edu/ed

Re: [ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Roberto C. S. <ro...@co...>]

I would also need to know the manufacturer/model of the monitor for this
to be useful.

Regards,

-Roberto

On Fri, Mar 28, 2008 at 01:40:00AM -0500, Ed Bennett wrote:
> foouser@K2:~$ sudo LANG= LC_ALL= ddccontrol -p -c -d
> ddccontrol version 0.4.2
> Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
> Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
> This program comes with ABSOLUTELY NO WARRANTY.
> You may redistribute copies of this program under the terms of the GNU General
> Public License.
> 
> Probing for available monitors.I/O warning : failed to load external entity
> "/usr/share/ddccontrol-db/monitor/GWY08ED.xml"
> Document not parsed successfully.
> ..
> Detected monitors :
>  - Device: pci:02:00.0-1
>    DDC/CI supported: Yes
>    Monitor Name: VESA standard monitor
>    Input type: Analog
>   (Automatically selected)
> Reading EDID and initializing DDC/CI at bus pci:02:00.0-1...
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> I/O warning : failed to load external entity
> "/usr/share/ddccontrol-db/monitor/GWY08ED.xml"
> Document not parsed successfully.
> 
> EDID readings:
> 	Plug and Play ID: GWY08ED [VESA standard monitor]
> 	Input type: Analog
> =============================== WARNING ===============================
> There is no support for your monitor in the database, but ddccontrol is
> using a basic generic profile. Many controls will not be supported, and
> some controls may not work as expected.
> Please update ddccontrol-db, or, if you are already using the latest
> version, please send the output of the following command to
> ddc...@li...:
> 
> LANG= LC_ALL= ddccontrol -p -c -d
> 
> Thank you.
> =============================== WARNING ===============================
> 
> Capabilities:
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Invalid response, length is 76, should be 64 at most
> Capabilities read fail.
> 
> Controls (valid/current/max) [Description - Value name]:
> Control 0x02: +/2/65535   [???]
> Control 0x05: +/0/65535   [???]
> Control 0x06: +/0/1   [???]
> Control 0x08: +/0/65535   [???]
> Control 0x0b: +/3200/9600   [???]
> Control 0x0c: +/0/2   [???]
> Control 0x0e: +/25/60   [???]
> Control 0x10: +/100/100   [???]
> Control 0x12: +/134/255   [???]
> Control 0x14: +/11/11   [???]
> Control 0x16: +/200/200   [???]
> Control 0x18: +/200/200   [???]
> Control 0x1a: +/200/200   [???]
> Control 0x1e: +/0/65535   [???]
> Control 0x20: +/273/722   [???]
> Control 0x30: +/31/39   [???]
> Control 0x3e: +/50/63   [???]
> Control 0x60: +/1/65535   [???]
> Control 0x68: +/256/65535   [???]
> Control 0x86: +/8/8   [???]
> Control 0x95: +/65476/65535   [???]
> Control 0x96: +/0/65535   [???]
> Control 0x97: +/0/65535   [???]
> Control 0x98: +/0/65535   [???]
> Control 0x9b: +/200/200   [???]
> Control 0x9d: +/200/200   [???]
> Control 0x9f: +/200/200   [???]
> Control 0xa4: +/0/65535   [???]
> Control 0xa5: +/0/1   [???]
> Control 0xaa: +/1/65535   [???]
> Control 0xac: +/65/65535   [???]
> Control 0xae: +/60/65535   [???]
> Control 0xb6: +/3/65535   [???]
> Control 0xc0: +/3907/65535   [???]
> Control 0xc6: +/129/65535   [???]
> Control 0xc8: +/2/65535   [???]
> Control 0xc9: +/256/65535   [???]
> Control 0xca: +/2/65535   [???]
> Control 0xd6: +/1/65535   [???]
> Control 0xdf: +/513/65535   [???]
> Control 0xea: +/40/100   [???]
> Control 0xf1: +/100/200   [???]
> Control 0xf2: +/100/200   [???]
> Control 0xf3: +/50/100   [???]
> Control 0xf4: +/50/100   [???]
> Control 0xf5: +/15/15   [???]
> Control 0xf6: +/0/65535   [???]
> Control 0xf7: +/1/1   [???]
> Control 0xfa: +/0/2   [???]
> Control 0xfb: +/0/65535   [???]
> Control 0xfc: +/0/65535   [???]
> Control 0xfd: +/0/65535   [???]
> Control 0xfe: +/0/4   [???]
> foouser@K2:~$ 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Ed Bennett
> Research Specialist
> Department of Art and Technology Studies
> School of the Art Institute of Chicago
> 112 S. Michigan Ave. Rm 410
> Chicago, IL 60640
> ph 312-345-3686
> fx 312-345-3565
> sbe...@sa...
> http://sprocket.telab.artic.edu/ed
> 
> 
> 
> 
> 
> 
> 
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> ddccontrol-users mailing list
> ddc...@li...
> https://lists.sourceforge.net/lists/listinfo/ddccontrol-users

-- 
Roberto C. Sánchez
http://people.connexer.com/~roberto
http://www.connexer.com

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Ruben M. <ru...@zo...>]

Output:

LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitorsnvidia_open: cannot open /dev/mem:
Permission denied

Detected monitors :
No monitor supporting DDC/CI available.
If your graphics card need it, please check all the required kernel
modules are loaded (i2c-dev, and your framebuffer driver).


I have just installed an AGP NVIDIA FX 5200 128 mb graphics card, but i
can't seem to find/install a supported driver.


Regards,
Ruben.

Re: [ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Roberto C. S. <ro...@co...>]

On Mon, May 19, 2008 at 05:03:02PM +0200, Ruben Mepschen wrote:
> Output:
> 
> LANG= LC_ALL= ddccontrol -p -c -d
> ddccontrol version 0.4.2
> Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
> Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
> This program comes with ABSOLUTELY NO WARRANTY.
> You may redistribute copies of this program under the terms of the GNU
> General Public License.
> 
> Probing for available monitorsnvidia_open: cannot open /dev/mem:
> Permission denied
  ^^^^^^^^^^^^^^^^^

You need to execute the command as root.

Regards,

-Roberto
-- 
Roberto C. Sánchez
http://people.connexer.com/~roberto
http://www.connexer.com

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Paul H. <tor...@ho...>]

	
	
	
	

Is this OK?Paul Haines

LANG= LC_ALL=
ddccontrol -p -c -d

ddccontrol version
0.4.2

Copyright 2004-2005
Oleg I. Vdovikin (ol...@cs...)

Copyright 2004-2006
Nicolas Boichat (ni...@bo...)

This program comes with
ABSOLUTELY NO WARRANTY.

You may redistribute
copies of this program under the terms of the GNU General Public
License.



Probing for available
monitorsRequest IO Perm: Operation not permitted

*** glibc detected ***
/usr/bin/ddcpci: free(): invalid pointer: 0xb7f0b190 ***

======= Backtrace:
=========

/lib/tls/i686/cmov/libc.so.6[0xb7e2aa85]

/lib/tls/i686/cmov/libc.so.6(cfree+0x90)[0xb7e2e4f0]

/usr/bin/ddcpci[0x804cd64]

/usr/bin/ddcpci[0x8049646]

/lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0)[0xb7dd5450]

/usr/bin/ddcpci[0x8048f41]

======= Memory map:
========

08048000-08053000 r-xp
00000000 08:05 944113     /usr/bin/ddcpci

08053000-08054000 rw-p
0000a000 08:05 944113     /usr/bin/ddcpci

08054000-08075000 rw-p
08054000 00:00 0          [heap]

b7c00000-b7c21000 rw-p
b7c00000 00:00 0 

b7c21000-b7d00000 ---p
b7c21000 00:00 0 

b7db3000-b7dbd000 r-xp
00000000 08:05 1876032    /lib/libgcc_s.so.1

b7dbd000-b7dbe000 rw-p
0000a000 08:05 1876032    /lib/libgcc_s.so.1

b7dbe000-b7dbf000 rw-p
b7dbe000 00:00 0 

b7dbf000-b7f08000 r-xp
00000000 08:05 1893714    /lib/tls/i686/cmov/libc-2.7.so

b7f08000-b7f09000 r--p
00149000 08:05 1893714    /lib/tls/i686/cmov/libc-2.7.so

b7f09000-b7f0b000 rw-p
0014a000 08:05 1893714    /lib/tls/i686/cmov/libc-2.7.so

b7f0b000-b7f0e000 rw-p
b7f0b000 00:00 0 

b7f0e000-b7f22000 r-xp
00000000 08:05 944262     /usr/lib/libz.so.1.2.3.3

b7f22000-b7f23000 rw-p
00013000 08:05 944262     /usr/lib/libz.so.1.2.3.3

b7f23000-b7f24000 rw-p
b7f23000 00:00 0 

b7f36000-b7f37000 rw-p
b7f36000 00:00 0 

b7f37000-b7f38000 r-xp
b7f37000 00:00 0          [vdso]

b7f38000-b7f52000 r-xp
00000000 08:05 1875987    /lib/ld-2.7.so

b7f52000-b7f54000 rw-p
00019000 08:05 1875987    /lib/ld-2.7.so

bff0c000-bff21000 rw-p
bffeb000 00:00 0          [stack]


_________________________________________________________________
Make a mini you on Windows Live Messenger!
http://clk.atdmt.com/UKM/go/107571437/direct/01/

Re: [ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Roberto C. S. <ro...@co...>]

On Fri, Aug 29, 2008 at 05:00:56PM +0100, Paul Haines wrote:
> 
> 
> 
> 
> 
> 
> 	
> 	
> 	
> 	
> 
> Is this OK?Paul Haines
> 
> LANG= LC_ALL=
> ddccontrol -p -c -d
> 
> ddccontrol version
> 0.4.2
> 
> Copyright 2004-2005
> Oleg I. Vdovikin (ol...@cs...)
> 
> Copyright 2004-2006
> Nicolas Boichat (ni...@bo...)
> 
> This program comes with
> ABSOLUTELY NO WARRANTY.
> 
> You may redistribute
> copies of this program under the terms of the GNU General Public
> License.
> 
> 
> 
> Probing for available
> monitorsRequest IO Perm: Operation not permitted
> 
You need to run the command either as root or with sudo.

Regards,

-Roberto

-- 
Roberto C. Sánchez
http://people.connexer.com/~roberto
http://www.connexer.com

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Rèn <el...@he...>]

LANG= LC_ALL= ddccontrol -p -c -d

Re: [ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Roberto C. S. <ro...@co...>]

On Thu, Oct 30, 2008 at 02:35:56AM +0100, Rèn wrote:
> LANG= LC_ALL= ddccontrol -p -c -d

For this to be useful, you need to include the output of the command
(when run as root) and also the model and other relevant info about the
monitor.

Regards,

-Roberto

-- 
Roberto C. Sánchez
http://people.connexer.com/~roberto
http://www.connexer.com

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[victor v. <ver...@ya...>]

LANG= LC_ALL= ddccontrol -p -c -


      

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Mariano R. <so...@tu...>]

ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors.I/O warning : failed to load external
entity "/usr/share/ddccontrol-db/monitor/SAM01B7.xml"
Document not parsed successfully.
..
Detected monitors :
 - Device: pci:00:0d.0-1
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:00:0d.0-1...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/SAM01B7.xml"
Document not parsed successfully.

EDID readings:
	Plug and Play ID: SAM01B7 [VESA standard monitor]
	Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (type(LCD)vcp(04 05 06 08 0E 10 12 16 18 1A 1E 20 30 3E 87
B0(1 2) B6 C6 C8 C9 D6(1 4) DC(1 2 3 4 5 6) DF F0(0 1 2 3 4) F2 FA FB F9
FC FD FE E0(0 1 2 3)))
Parsed output: 
	VCP: 04 05 06 08 0e 10 12 16 18 1a 1e 20 30 3e 87 b0 b6 c6 c8 c9 d6 dc
df e0 f0 f2 f9 fa fb fc fd fe 
	Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1 C [Restore Factory Default Geometry]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0e: +/80/160 C [Image Lock Coarse (Clock)]
Control 0x10: +/14/100 C [Brightness]
Control 0x12: +/70/100 C [Contrast]
Control 0x16: +/32/64 C [Red maximum level]
Control 0x18: +/32/64 C [Green maximum level]
Control 0x1a: +/32/64 C [Blue maximum level]
Control 0x1e: +/0/2 C [Automatically adjust]
Control 0x20: +/74/160 C [Horizontal Position]
Control 0x30: +/25/50 C [Vertical Position]
Control 0x3e: +/2/31 C [Image Lock Fine (Clock Phase)]
Control 0x60: +/1/3   [???]
Control 0x62: +/50/100   [???]
Control 0x6c: +/128/255   [???]
Control 0x6e: +/128/255   [???]
Control 0x70: +/128/255   [???]
Control 0x87: +/14/25 C [???]
Control 0x9b: +/119/0   [???]
Control 0x9c: +/183/0   [???]
Control 0x9d: +/161/0   [???]
Control 0x9e: +/166/1   [???]
Control 0x9f: +/67/64   [???]
Control 0xa0: +/24/240   [???]
Control 0xb0: +/0/2 C [Settings]
Control 0xb6: +/3/8 C [???]
Control 0xc6: +/1/1 C [???]
Control 0xc8: +/5/16 C [???]
Control 0xc9: +/1/0 C [???]
Control 0xca: +/2/2   [???]
Control 0xcc: +/10/11   [???]
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdc: +/6/5 C [???]
Control 0xdf: +/512/0 C [???]
Control 0xe0: +/0/3 C [???]
Control 0xe1: +/1/1   [???]
Control 0xe2: +/0/1   [???]
Control 0xed: +/98/255   [???]
Control 0xee: +/100/255   [???]
Control 0xef: +/100/255   [???]
Control 0xf0: +/0/4 C [???]
Control 0xf2: +/0/2 C [???]
Control 0xf5: +/0/2   [???]
Control 0xf9: +/50/100 C [???]
Control 0xfa: +/50/100 C [???]
Control 0xfb: +/50/100 C [???]
Control 0xfc: +/11/20 C [???]

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[daniele <ba...@in...>]

LANG= LC_ALL= ddccontrol -p -c -d

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[fred68c <fr...@fr...>]

Hello,

Here is output of LANG= LC_ALL= ddccontrol -p -c -d

ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors.I/O warning : failed to load external
entity "/usr/share/ddccontrol-db/monitor/IVM5600.xml"
Document not parsed successfully.
..
Detected monitors :
- Device: pci:01:00.0-1
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:01:00.0-1...
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/IVM5600.xml"
Document not parsed successfully.

EDID readings:
Plug and Play ID: IVM5600 [VESA standard monitor]
Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
Invalid sequence in caps.
Capabilities read fail.

Controls (valid/current/max) [Description - Value name]:

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[<ni...@sp...>]

LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU 
General Public License.

Probing for available monitors.......I/O warning : failed to load 
external entity "/usr/share/ddccontrol-db/monitor/DELA027.xml"
Document not parsed successfully.
.I/O warning : failed to load external entity 
"/usr/share/ddccontrol-db/monitor/SAM01E1.xml"
Document not parsed successfully.
...
Detected monitors :
  - Device: dev:/dev/i2c-3
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Analog
   (Automatically selected)
  - Device: dev:/dev/i2c-2
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Analog
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-3...
I/O warning : failed to load external entity 
"/usr/share/ddccontrol-db/monitor/DELA027.xml"
Document not parsed successfully.

EDID readings:
     Plug and Play ID: DELA027 [VESA standard monitor]
     Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: vcp(02 04 05 06 08 0E 0B 0C 10 12 14(05 06 08 0B) 16 18 1A 
1E 20 30 3E 52 60 6C 6E 70 AC AE B2 B6 C0 C6 C8 C9 CA D6 DF) 
mswhql(1)type(LCD) mccs_ver(2.0) asset_eep(64) mpu(0.04)
Parsed output:
     VCP:
     Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/1/255   [???]
Control 0x04: +/0/255   [???]
Control 0x05: +/0/1   [???]
Control 0x06: +/0/255   [???]
Control 0x08: +/0/255   [???]
Control 0x0b: +/0/24028   [???]
Control 0x0c: +/0/0   [???]
Control 0x0e: +/50/100   [???]
Control 0x10: +/75/100   [???]
Control 0x12: +/75/100   [???]
Control 0x14: +/11/11   [???]
Control 0x16: +/100/100   [???]
Control 0x18: +/100/100   [???]
Control 0x1a: +/100/100   [???]
Control 0x1e: +/0/2   [???]
Control 0x20: +/50/100   [???]
Control 0x30: +/37/74   [???]
Control 0x3e: +/40/63   [???]
Control 0x60: +/1/14   [???]
Control 0x68: +/0/5   [???]
Control 0x6c: +/128/255   [???]
Control 0x6e: +/128/255   [???]
Control 0x70: +/128/255   [???]
Control 0xa8: +/0/3   [???]
Control 0xac: +/64/65535   [???]
Control 0xae: +/961/65535   [???]
Control 0xb2: +/1/8   [???]
Control 0xb4: +/1/2   [???]
Control 0xb6: +/3/5   [???]
Control 0xc0: +/0/65535   [???]
Control 0xc8: +/5/65535   [???]
Control 0xc9: +/1/65535   [???]
Control 0xca: +/2/2   [???]
Control 0xdf: +/513/0   [???]
Control 0xe3: +/0/1   [???]
Control 0xfa: +/0/65535   [???]
Control 0xff: +/0/65535   [???]

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Ivan G. <gon...@gm...>]

ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU General Public License.

Probing for available monitors.....I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/SAM041F.xml"
Document not parsed successfully.
.I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/SAM041F.xml"
Document not parsed successfully.

Detected monitors :
 - Device: dev:/dev/i2c-0
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Digital
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-0...

EDID readings:
	Plug and Play ID: SAM041F [VESA standard monitor]
	Input type: Digital
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (prot(monitor)type(LCD)model(McKinley)mccs_ver(2.0)vcp(04 05 08 10 12 14(02 03 0A 0B) 16 18 1A 60(01 03) 87 B0(01 02) B6 C6 C8 C9 D6(01 04) DC(01 02 03 04 05 06 F0 F2) DB(00 04 FE) DF E8(00 01 06 07 FE) E9 EA(00 01 02 03 04) F0(00 01 02 03) F2 F6 ))mswhql(1))
Parsed output: 
	VCP: 04 05 08 10 12 14 16 18 1a 60 87 b0 b6 c6 c8 c9 d6 db dc df e8 e9 ea f0 f2 f6 
	Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/2/255   [???]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1   [???]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0e: +/80/160   [???]
Control 0x10: +/18/100 C [Brightness]
Control 0x12: +/80/100 C [Contrast]
Control 0x14: +/2/11 C [???]
Control 0x16: +/32/64 C [Red maximum level]
Control 0x18: +/32/64 C [Green maximum level]
Control 0x1a: +/32/64 C [Blue maximum level]
Control 0x1e: +/0/2   [???]
Control 0x20: +/55/100   [???]
Control 0x30: +/29/60   [???]
Control 0x3e: +/10/31   [???]
Control 0x54: +/0/2   [???]
Control 0x60: +/3/3 C [Input Source Select - Digital]
Control 0x62: +/50/100   [???]
Control 0x6c: +/128/255   [???]
Control 0x6e: +/128/255   [???]
Control 0x70: +/128/255   [???]
Control 0x87: +/25/25 C [???]
Control 0xaa: +/0/3   [???]
Control 0xb6: +/3/9 C [???]
Control 0xc6: +/1/1 C [???]
Control 0xc8: +/5/16 C [???]
Control 0xc9: +/1/0 C [???]
Control 0xca: +/2/2   [???]
Control 0xcc: +/9/11   [???]
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdb: +/0/2 C [???]
Control 0xdc: +/6/7 C [???]
Control 0xdf: +/512/514 C [???]
Control 0xe0: +/3/515   [???]
Control 0xe1: +/1/1   [???]
Control 0xe2: +/0/1   [???]
Control 0xe4: +/0/2   [???]
Control 0xe8: +/0/7 C [???]
Control 0xe9: +/0/1 C [???]
Control 0xea: +/0/4 C [???]
Control 0xed: +/106/255   [???]
Control 0xee: +/106/255   [???]
Control 0xef: +/106/255   [???]
Control 0xf0: +/0/3 C [???]
Control 0xf2: +/0/2 C [???]
Control 0xf3: +/1/2   [???]
Control 0xf5: +/0/2   [???]
Control 0xf6: +/1/2 C [???]

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[philippe l. <pl...@no...>]

root@NOCOUTNG2:/home/philippe# LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU 
General Public License.

Probing for available monitorsI/O warning : failed to load external 
entity "/usr/share/ddccontrol-db/monitor/GSM446F.xml"
Document not parsed successfully.
.
Detected monitors :
  - Device: pci:01:00.0-0
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Analog
   (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:01:00.0-0...
I/O warning : failed to load external entity 
"/usr/share/ddccontrol-db/monitor/GSM446F.xml"
Document not parsed successfully.

EDID readings:
     Plug and Play ID: GSM446F [VESA standard monitor]
     Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: prot(monitor)type(lcd)model(L1x52)vcp(02 04 05 06 08 0B 0C 
0E 10 12 14(01 05 06 07 08 0B) 16 18 1A 1E 20 30 3E 60 6C 6E 70 87 AC AE 
B6 C0 C6 C8 C9 D6(01 04) DF F1 F2(00 01 02) F3(00 01 02 03) FC(00 01 02 
03) FD(00 01) FE(00 01 02) )mswhql(1)mccs_ver(2.0)
Parsed output:
     VCP:
     Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/1/65535   [???]
Control 0x03: +/0/0   [???]
Control 0x04: +/0/65535   [???]
Control 0x05: +/0/65535   [???]
Control 0x06: +/0/65535   [???]
Control 0x08: +/0/65535   [???]
Control 0x0b: +/100/5000   [???]
Control 0x0c: +/35/100   [???]
Control 0x0e: +/115/230   [???]
Control 0x10: +/98/100   [???]
Control 0x12: +/70/100   [???]
Control 0x14: +/5/11   [???]
Control 0x16: +/50/100   [???]
Control 0x18: +/50/100   [???]
Control 0x1a: +/50/100   [???]
Control 0x1e: +/0/65535   [???]
Control 0x20: +/80/172   [???]
Control 0x30: +/24/48   [???]
Control 0x3e: +/41/63   [???]
Control 0x60: +/1/3   [???]
Control 0x6c: +/50/100   [???]
Control 0x6e: +/50/100   [???]
Control 0x70: +/50/100   [???]
Control 0x87: +/10/10   [???]
Control 0xac: +/60000/0   [???]
Control 0xae: +/7510/0   [???]
Control 0xb6: +/3/8   [???]
Control 0xc0: +/4270/65535   [???]
Control 0xc6: +/104/65535   [???]
Control 0xc8: +/5/65535   [???]
Control 0xc9: +/1/65535   [???]
Control 0xcc: +/2/65535   [???]
Control 0xd6: +/1/4   [???]
Control 0xdf: +/512/65535   [???]
Control 0xf1: +/100/100   [???]
Control 0xf2: +/0/2   [???]
Control 0xf3: +/0/3   [???]
Control 0xfc: +/0/3   [???]
Control 0xfd: +/1/1   [???]
Control 0xfe: +/1/2   [???]
root@NOCOUTNG2:/home/philippe#

-- 
Philippe Leroux    NOC OUT
21, rue de Fécamp
75012 Paris
Tel/fax: 01 48 73 54 53
mobile: 06 07 86 25 22
pl...@no...
www.nocout.net
                        ______________

Ce message et ses eventuelles pieces jointes sont adresses exclusivement
a l usage de leur(s) destinataire(s), et leur contenu est strictement confidentiel.
Toute copie, retransmission, diffusion ou autre usage en tout ou partie,
ainsi que toute utilisation par toute personne ou entite legale sont
formellement interdits.
Si vous recevez ce message par erreur, nous vous remercions de le
detruire et d en aviser immediatement l expediteur.

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Duarte N. G. <dnu...@gm...>]

debian:/usr/local/bin# LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitorsradeon_open: mmap failed: Invalid argument
....I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/ACI26A4.xml"
Document not parsed successfully.
...
Detected monitors :
 - Device: dev:/dev/i2c-2
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Digital
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-2...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/ACI26A4.xml"
Document not parsed successfully.

EDID readings:
	Plug and Play ID: ACI26A4 [VESA standard monitor]
	Input type: Digital
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (vcp(02 04 05 06 08 10 12 14(01 05 06 08 0B) 16 18 1A 1E
6C 6E 70 AC AE B6 C0 C6 C8 C9 CA(01 02) D6(01 04)
DF)type(LCD)mccs_ver(2.0)asset_eep(32)mswhql(1))
Parsed output:
	VCP: 02 04 05 06 08 10 12 14 16 18 1a 1e 6c 6e 70 ac ae b6 c0 c6 c8
c9 ca d6 df
	Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/2/2 C [???]
Control 0x04: +/0/65535 C [Restore Factory Defaults]
Control 0x05: +/0/65535 C [Restore Brightness and Contrast]
Control 0x06: +/0/65535 C [Restore Factory Default Geometry]
Control 0x08: +/0/65535 C [Restore Factory Default Color]
Control 0x0e: +/2130/100   [???]
Control 0x10: +/90/100 C [Brightness]
Control 0x12: +/80/100 C [Contrast]
Control 0x14: +/11/11 C [???]
Control 0x16: +/100/100 C [Red maximum level]
Control 0x18: +/100/100 C [Green maximum level]
Control 0x1a: +/100/100 C [Blue maximum level]
Control 0x1e: +/0/1 C [Automatically adjust]
Control 0x20: +/0/100   [???]
Control 0x30: +/65531/54   [???]
Control 0x3e: +/0/63   [???]
Control 0x60: +/768/65535   [???]
Control 0x68: +/256/65535   [???]
Control 0x6c: +/128/255 C [Red minimum level]
Control 0x6e: +/128/255 C [Green minimum level]
Control 0x70: +/128/255 C [Blue minimum level]
Control 0x95: +/0/2047   [???]
Control 0x96: +/0/2047   [???]
Control 0x97: +/1920/2047   [???]
Control 0x98: +/1200/2047   [???]
Control 0x9b: +/50/100   [???]
Control 0x9c: +/50/100   [???]
Control 0x9d: +/50/100   [???]
Control 0x9e: +/50/100   [???]
Control 0x9f: +/50/100   [???]
Control 0xa0: +/50/100   [???]
Control 0xac: +/58114/65535 C [???]
Control 0xae: +/22018/65535 C [???]
Control 0xb6: +/3/65535 C [???]
Control 0xc0: +/0/65535 C [???]
Control 0xc6: +/65535/65535 C [???]
Control 0xc8: +/18946/65535 C [???]
Control 0xc9: +/256/65535 C [???]
Control 0xca: +/1/2 C [???]
Control 0xd6: +/256/65535 C [DPMS Control]
Control 0xdf: +/512/65535 C [???]
Control 0xfe: +/0/65535   [???]
debian:/usr/local/bin#

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Marc A. <mar...@ya...>]

ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU General Public License.

ddcpci initing...
Starting /usr/bin/ddcpci 1 1644379303 &...
Probing for available monitors...
Invalid response, length is 127, should be 64 at most
I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/ACR06BB.xml"
Document not parsed successfully.
Error while reading write message answer: Bad message
Error while reading write message answer: Bad message
Error while reading write message answer: Bad message
I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/ACRAD04.xml"
Document not parsed successfully.
Found PCI device (pci:01:00.0-0)
Found PCI device (pci:01:00.0-1)
Found PCI device (pci:01:00.0-2)
Found PCI device (pci:01:00.0-3)
Device: pci:01:00.0-0
Control brightness has been discarded by the caps string.
Control contrast has been discarded by the caps string.
Control red has been discarded by the caps string.
Control green has been discarded by the caps string.
Control blue has been discarded by the caps string.
Control redblack has been discarded by the caps string.
Control greenblack has been discarded by the caps string.
Control blueblack has been discarded by the caps string.
Control colortemp has been discarded by the caps string.
Control hpos has been discarded by the caps string.
Control vpos has been discarded by the caps string.
Control hsize has been discarded by the caps string.
Control vsize has been discarded by the caps string.
Control auto has been discarded by the caps string.
Control hpincushion has been discarded by the caps string.
Control hpincushionbalance has been discarded by the caps string.
Control vlinearity has been discarded by the caps string.
Control vlinearitybalance has been discarded by the caps string.
Control hmisconvergence has been discarded by the caps string.
Control vmisconvergence has been discarded by the caps string.
Control keybalance has been discarded by the caps string.
Control key has been discarded by the caps string.
Control tdistortionctrl has been discarded by the caps string.
Control tdistortionbalance has been discarded by the caps string.
Control bdistortionctrl has been discarded by the caps string.
Control bdistortionbalance has been discarded by the caps string.
Control tilt has been discarded by the caps string.
Control hmoire has been discarded by the caps string.
Control vmoire has been discarded by the caps string.
Control focus has been discarded by the caps string.
Control coarse has been discarded by the caps string.
Control fine has been discarded by the caps string.
Control defaults has been discarded by the caps string.
Control defaultluma has been discarded by the caps string.
Control defaultgeom has been discarded by the caps string.
Control defaultcolor has been discarded by the caps string.
Control settings has been discarded by the caps string.
Control audiospeakervolume has been discarded by the caps string.
Control degauss has been discarded by the caps string.
Control osdorientation has been discarded by the caps string.
Control inputsource has been discarded by the caps string.
Control dpms has been discarded by the caps string.
Control power has been discarded by the caps string.
ddcci_open returned 0
Device: pci:01:00.0-1
Control brightness has been discarded by the caps string.
Control contrast has been discarded by the caps string.
Control red has been discarded by the caps string.
Control green has been discarded by the caps string.
Control blue has been discarded by the caps string.
Control redblack has been discarded by the caps string.
Control greenblack has been discarded by the caps string.
Control blueblack has been discarded by the caps string.
Control colortemp has been discarded by the caps string.
Control hpos has been discarded by the caps string.
Control vpos has been discarded by the caps string.
Control hsize has been discarded by the caps string.
Control vsize has been discarded by the caps string.
Control auto has been discarded by the caps string.
Control hpincushion has been discarded by the caps string.
Control hpincushionbalance has been discarded by the caps string.
Control vlinearity has been discarded by the caps string.
Control vlinearitybalance has been discarded by the caps string.
Control hmisconvergence has been discarded by the caps string.
Control vmisconvergence has been discarded by the caps string.
Control keybalance has been discarded by the caps string.
Control key has been discarded by the caps string.
Control tdistortionctrl has been discarded by the caps string.
Control tdistortionbalance has been discarded by the caps string.
Control bdistortionctrl has been discarded by the caps string.
ControError while reading write message answer: Bad message
Error while reading write message answer: Bad message
Reading EDID 0x50 failed.
Error while reading write message answer: Bad message
Reading EDID 0x50 failed.
ioctl(): Input/output error
ioctl returned -1
I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/ACR06BB.xml"
Document not parsed successfully.
ioctl(): No such device or address
ioctl returned -1
Reading EDID 0x50 failed.
ioctl(): No such device or address
ioctl returned -1
ioctl(): No such device or address
ioctl returned -1
ioctl(): No such device or address
ioctl returned -1
I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/ACRAD04.xml"
Document not parsed successfully.
l bdistortionbalance has been discarded by the caps string.
Control tilt has been discarded by the caps string.
Control hmoire has been discarded by the caps string.
Control vmoire has been discarded by the caps string.
Control focus has been discarded by the caps string.
Control coarse has been discarded by the caps string.
Control fine has been discarded by the caps string.
Control defaults has been discarded by the caps string.
Control defaultluma has been discarded by the caps string.
Control defaultgeom has been discarded by the caps string.
Control defaultcolor has been discarded by the caps string.
Control settings has been discarded by the caps string.
Control audiospeakervolume has been discarded by the caps string.
Control degauss has been discarded by the caps string.
Control osdorientation has been discarded by the caps string.
Control inputsource has been discarded by the caps string.
Control dpms has been discarded by the caps string.
Control power has been discarded by the caps string.
ddcci_open returned -1
Device: pci:01:00.0-2
ddcci_open returned -2
Device: pci:01:00.0-3
ddcci_open returned -2
Found I2C device (dev:/dev/i2c-3)
Control brightness has been discarded by the caps string.
Control contrast has been discarded by the caps string.
Control red has been discarded by the caps string.
Control green has been discarded by the caps string.
Control blue has been discarded by the caps string.
Control redblack has been discarded by the caps string.
Control greenblack has been discarded by the caps string.
Control blueblack has been discarded by the caps string.
Control colortemp has been discarded by the caps string.
Control hpos has been discarded by the caps string.
Control vpos has been discarded by the caps string.
Control hsize has been discarded by the caps string.
Control vsize has been discarded by the caps string.
Control auto has been discarded by the caps string.
Control hpincushion has been discarded by the caps string.
Control hpincushionbalance has been discarded by the caps string.
Control vlinearity has been discarded by the caps string.
Control vlinearitybalance has been discarded by the caps string.
Control hmisconvergence has been discarded by the caps string.
Control vmisconvergence has been discarded by the caps string.
Control keybalance has been discarded by the caps string.
Control key has been discarded by the caps string.
Control tdistortionctrl has been discarded by the caps string.
Control tdistortionbalance has been discarded by the caps string.
Control bdistortionctrl has been discarded by the caps string.
Control bdistortionbalance has been discarded by the caps string.
Control tilt has been discarded by the caps string.
Control hmoire has been discarded by the caps string.
Control vmoire has been discarded by the caps string.
Control focus has been discarded by the caps string.
Control coarse has been discarded by the caps string.
Control fine has been discarded by the caps string.
Control defaults has been discarded by the caps string.
Control defaultluma has been discarded by the caps string.
Control defaultgeom has been discarded by the caps string.
Control defaultcolor has been discarded by the caps string.
Control settings has been discarded by the caps string.
Control audiospeakervolume has been discarded by the caps string.
Control degauss has been discarded by the caps string.
Control osdorientation has been discarded by the caps string.
Control inputsource has been discarded by the caps string.
Control dpms has been discarded by the caps string.
Control power has been discarded by the caps string.
ddcci_open returned 0
Found I2C device (dev:/dev/i2c-4)
ddcci_open returned -2
Found I2C device (dev:/dev/i2c-2)
Control brightness has been discarded by the caps string.
Control contrast has been discarded by the caps string.
Control red has been discarded by the caps string.
Control green has been discarded by the caps string.
Control blue has been discarded by the caps string.
Control redblack has been discarded by the caps string.
Control greenblack has been discardedioctl(): No such device or address
ioctl returned -1
ioctl(): Operation not supported
ioctl returned -1
Reading EDID 0x50 failed.
ioctl(): No such device or address
ioctl returned -1
Reading EDID 0x50 failed.
I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/ACR06BB.xml"
Document not parsed successfully.
 by the caps string.
Control blueblack has been discarded by the caps string.
Control colortemp has been discarded by the caps string.
Control hpos has been discarded by the caps string.
Control vpos has been discarded by the caps string.
Control hsize has been discarded by the caps string.
Control vsize has been discarded by the caps string.
Control auto has been discarded by the caps string.
Control hpincushion has been discarded by the caps string.
Control hpincushionbalance has been discarded by the caps string.
Control vlinearity has been discarded by the caps string.
Control vlinearitybalance has been discarded by the caps string.
Control hmisconvergence has been discarded by the caps string.
Control vmisconvergence has been discarded by the caps string.
Control keybalance has been discarded by the caps string.
Control key has been discarded by the caps string.
Control tdistortionctrl has been discarded by the caps string.
Control tdistortionbalance has been discarded by the caps string.
Control bdistortionctrl has been discarded by the caps string.
Control bdistortionbalance has been discarded by the caps string.
Control tilt has been discarded by the caps string.
Control hmoire has been discarded by the caps string.
Control vmoire has been discarded by the caps string.
Control focus has been discarded by the caps string.
Control coarse has been discarded by the caps string.
Control fine has been discarded by the caps string.
Control defaults has been discarded by the caps string.
Control defaultluma has been discarded by the caps string.
Control defaultgeom has been discarded by the caps string.
Control defaultcolor has been discarded by the caps string.
Control settings has been discarded by the caps string.
Control audiospeakervolume has been discarded by the caps string.
Control degauss has been discarded by the caps string.
Control osdorientation has been discarded by the caps string.
Control inputsource has been discarded by the caps string.
Control dpms has been discarded by the caps string.
Control power has been discarded by the caps string.
ddcci_open returned -1
Found I2C device (dev:/dev/i2c-0)
ddcci_open returned -2
Found I2C device (dev:/dev/i2c-1)
ddcci_open returned -2
Detected monitors :
 - Device: pci:01:00.0-0
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
 - Device: pci:01:00.0-1
   DDC/CI supported: No
   Monitor Name: VESA standard monitor
   Input type: Digital
 - Device: dev:/dev/i2c-3
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
 - Device: dev:/dev/i2c-2
   DDC/CI supported: No
   Monitor Name: VESA standard monitor
   Input type: Digital
Reading EDID and initializing DDC/CI at bus pci:01:00.0-0...
Device: pci:01:00.0-0
Serial number: 1687164281
Manufactured: Week 49, 2006
EDID version: 1.3
Maximum size: 34 x 27 (cm)
Control brightness has been discarded by the caps string.
Control contrast has been discarded by the caps string.
Control red has been discarded by the caps string.
Control green has been discarded by the caps string.
Control blue has been discarded by the caps string.
Control redblack has been discarded by the caps string.
Control greenblack has been discarded by the caps string.
Control blueblack has been discarded by the caps string.
Control colortemp has been discarded by the caps string.
Control hpos has been discarded by the caps string.
Control vpos has been discarded by the caps string.
Control hsize has been discarded by the caps string.
Control vsize has been discarded by the caps string.
Control auto has been discarded by the caps string.
Control hpincushion has been discarded by the caps string.
Control hpincushionbalance has been discarded by the caps string.
Control vlinearity has been discarded by the caps string.
Control vlinearitybalance has been discarded by the caps string.
Control hmisconvergence has been discarded by the caps string.
Control vmisconvergence has been discarded by the caps string.
Control keybalance has been discarded by the caps stringInvalid response, length is 127, should be 8 at most
Invalid response, corrupted data - xor is 0x9a, length 0x08
6e 88 02 01 2e 01 ff ff 00 ff ff                | n..........     
Invalid response, length is 127, should be 8 at most
Invalid response, length is 127, should be 8 at most
Invalid response, length is 127, should be 8 at most
Invalid response, length is 127, should be 8 at most
Invalid response, corrupted data - xor is 0x17, length 0x08
6e 88 02 01 a3 01 ff ff 00 ff ff                | n..........     
Non-fatal error: Invalid response, magic is 0x7f
Invalid response, length is 127, should be 8 at most
Invalid response, corrupted data - xor is 0x7e, length 0x08
6e 88 02 00 ca 01 ff ff 01 ff ff                | n..........     
==>ddcpci is quitting.
.
Control key has been discarded by the caps string.
Control tdistortionctrl has been discarded by the caps string.
Control tdistortionbalance has been discarded by the caps string.
Control bdistortionctrl has been discarded by the caps string.
Control bdistortionbalance has been discarded by the caps string.
Control tilt has been discarded by the caps string.
Control hmoire has been discarded by the caps string.
Control vmoire has been discarded by the caps string.
Control focus has been discarded by the caps string.
Control coarse has been discarded by the caps string.
Control fine has been discarded by the caps string.
Control defaults has been discarded by the caps string.
Control defaultluma has been discarded by the caps string.
Control defaultgeom has been discarded by the caps string.
Control defaultcolor has been discarded by the caps string.
Control settings has been discarded by the caps string.
Control audiospeakervolume has been discarded by the caps string.
Control degauss has been discarded by the caps string.
Control osdorientation has been discarded by the caps string.
Control inputsource has been discarded by the caps string.
Control dpms has been discarded by the caps string.
Control power has been discarded by the caps string.

EDID readings:
	Plug and Play ID: ACR06BB [VESA standard monitor]
	Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: type(LCD)vcp(page0(04 08 0E 10 12 14(05 08 0B) 16 18 1A 1E 20 30 3E 62)
Parsed output: 
	VCP: 
	Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x04: +/0/1   [???]
Control 0x05: +/0/65535   [???]
Control 0x06: +/0/1   [???]
Control 0x08: +/0/1   [???]
Control 0x0e: +/50/110   [???]
Control 0x10: +/100/100   [???]
Control 0x12: +/100/100   [???]
Control 0x14: +/8/12   [???]
Control 0x16: +/100/100   [???]
Control 0x18: +/100/100   [???]
Control 0x1a: +/100/100   [???]
Control 0x1e: +/0/65535   [???]
Control 0x20: +/50/100   [???]
Control 0x30: +/36/76   [???]
Control 0x37: +/0/1   [???]
Control 0x3e: +/63/63   [???]
Control 0x60: +/256/65535   [???]
Control 0x68: +/1536/65535   [???]
Control 0xac: +/32514/65535   [???]
Control 0xae: +/22274/65535   [???]
Control 0xb6: +/768/65535   [???]
Control 0xc0: +/27976/65535   [???]
Control 0xc6: +/65535/65535   [???]
Control 0xc8: +/8450/65535   [???]
Control 0xc9: +/258/65535   [???]
Control 0xca: +/256/65535   [???]
Control 0xd6: +/256/65535   [???]
ddcpci being released...

Re: [ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[William O. <gun...@gm...>]

Hi Marc,

I'll try to reply to your message as well as I can.

But first of all, I'd like to ask you this: How did you manage to use
the i2c port of your graphics card? Are you using the proprietary
driver of the open source one? I've been trying for moths now, and
haven't been able to do it.

I imagine that you have so many devices because other peripherals you
use are i2c compliant. Or maybe it is just like many devices in linux,
some of them are just there, and not used. I honestly don't have a
better explanation, and anyways, this is not related to ddccontrol.

I have never seen any of the messages that appear in the files you sent.

It seems to me that, because your monitors are not in the database,
they use the very basic VESA configuration, and therefore you lose the
ability to control some of the features of your monitor, but is should
still be usable, at least for brightness and color.
And the output you get from DVI of VGA is definitely different, as the
parameters you can modify are indeed not the same.

To clarify the situation, could you run, for each bus separately, the
ddccontrol -pcd command (the c is important for me). I actually don't
really need the stderr.
Once this is done, could you please send the results back onto the mailing list?

I hope that answers some of your questions.

Regards,
Will

2011/5/25 Marc Albero <mar...@ya...>:
> My setup:
>
> - 2 Acer monitors: AL1722 via DVI, AL1723 via vga.
>
> - lscpi says this about my card:
> 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200]
> (rev 01)
> 01:00.1 Display controller: ATI Technologies Inc Device 5942 (rev 01)
>
> - lsmod (selection):
> i2c_dev          14600  0
> i2c_algo_bit   14084  1 radeonfb
> 2c_viapro       15892  0
> radeonfb         106048  1
> fb_ddc            10240  1 radeonfb
> radeon            342816 2
> drm                 96296  3 radeon
>
> - ls -l /dev/i2c*:
> crw-rw---- 1 root root 89, 0 2011-05-25 19:09 /dev/i2c-0
> crw-rw---- 1 root root 89, 1 2011-05-25 19:09 /dev/i2c-1
> crw-rw---- 1 root root 89, 2 2011-05-25 19:09 /dev/i2c-2
> crw-rw---- 1 root root 89, 3 2011-05-25 19:09 /dev/i2c-3
> crw-rw---- 1 root root 89, 4 2011-05-25 19:09 /dev/i2c-4
> Question: why so many i2c devices?
>
> - ddccontrol was executed when I had made /dev/i2c-* files available using
> method described in user guide. Apparently it used both access methods (i2c
> and direct pci). I used Ubuntu, and thus had to use sudo. I also added the
> -v option.
>
> - Apparently, ddccontrol only read control data from one of the monitors,
> the one on analog, ignoring the one on dvi. To get data from that one,
> I have tried things like "sudo ddccontrol -dc dev:/dev/i2c-{2,3}". The
> results are attached. Remarks: because I was dumping to txt en shell with
> &>, stderr messages appear at the beginning, and then all of stdout (I don't
> know why). I have marked the beginning of stdout with "-----HERE!!".
> Besides: information obtained from monitor on dvi is very terse when
> compared to that of the one on analog. Why?
>
> - Executing "sudo gddccontrol" shows similar behaviour to all above, just on
> a GUI.
>
> Please people, help me.
> Greetings,
> Marc Albero
> ------------------------------------------------------------------------------
> Simplify data backup and recovery for your virtual environment with vRanger.
> Installation's a snap, and flexible recovery options mean your data is safe,
> secure and there when you need it. Discover what all the cheering's about.
> Get your free trial download today.
> http://p.sf.net/sfu/quest-dev2dev2
> _______________________________________________
> ddccontrol-users mailing list
> ddc...@li...
> https://lists.sourceforge.net/lists/listinfo/ddccontrol-users
>
>

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[poslat p. <pos...@gm...>]

sudo LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors......I/O warning : failed to load external
entity "/usr/share/ddccontrol-db/monitor/PHLC035.xml"
Document not parsed successfully.
.
Detected monitors :
 - Device: dev:/dev/i2c-0
   DDC/CI supported: Yes
   Monitor Name: Philips standard LCD
   Input type: Digital
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-0...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/PHLC035.xml"
Document not parsed successfully.

EDID readings:
Plug and Play ID: PHLC035 [Philips standard LCD]
Input type: Digital
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a generic profile for your monitor's manufacturer. Some controls
may not be supported, or may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (prot(monitor)type(lcd)model(Philips 241E)cmds(01 02 03 07 0C
4E F3 E3)vcp(02 04 05 08 0B 0C 10 12 14(01 04 05 06 07 08 0A 0B) 16 18 1A
60(01 03) 6C 6E 70 AC AE B6 C0 C6 C8 C9 CA CC( 00 02 03 04 05 08 09 0A 0D)
D6(01 04) DC(00 01 02 03 08) DF E9(00 02) F0(00 01) 86(02
08)FF)mswhql(1)mccs_ver(2.1)asset_eep(32)mpu_ver(01)SmartManage(1.0))
Parsed output:
VCP: 02 04 05 08 0b 0c 10 12 14 16 18 1a 60 6c 6e 70 86 ac ae b6 c0 c6 c8
c9 ca cc d6 dc df e9 f0 ff
Type: LCD

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/2/255 C [???]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x06: +/0/1   [???]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0b: +/50/65535 C [???]
Control 0x0c: +/70/255 C [???]
Control 0x10: +/60/100 C [Brightness]
Control 0x12: +/55/100 C [Contrast]
Control 0x14: +/11/11 C [Color Preset - User 1]
Control 0x16: +/100/100 C [Red maximum level]
Control 0x18: +/100/100 C [Green maximum level]
Control 0x1a: +/100/100 C [Blue maximum level]
Control 0x60: +/3/3 C [Input Source Select - Digital]
Control 0x6c: +/128/255 C [Red minimum level]
Control 0x6e: +/128/255 C [Green minimum level]
Control 0x70: +/128/255 C [Blue minimum level]
Control 0x86: +/8/2 C [???]
Control 0xac: +/33737/65535 C [???]
Control 0xae: +/6000/65535 C [???]
Control 0xb6: +/3/4 C [???]
Control 0xc0: +/4380/65535 C [???]
Control 0xc6: +/111/65535 C [???]
Control 0xc8: +/18/65535 C [???]
Control 0xc9: +/3/65535 C [???]
Control 0xca: +/2/2 C [???]
Control 0xcc: +/9/255 C [???]
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdc: +/0/255 C [???]
Control 0xdf: +/513/65535 C [???]
Control 0xe9: +/0/2 C [???]
Control 0xf0: +/0/1 C [???]
Control 0xf2: +/3/4   [???]
Control 0xff: +/0/1 C [???]

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[Jeff S. <je...@sa...>]

LANG= LC_ALL= ddccontrol -p -c -d
ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitorsradeon_open: mmap failed: Invalid argument
......I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/AOC2219.xml"
Document not parsed successfully.
...
Detected monitors :
 - Device: dev:/dev/i2c-2
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Digital
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-2...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/AOC2219.xml"
Document not parsed successfully.

EDID readings:
Plug and Play ID: AOC2219 [VESA standard monitor]
Input type: Digital
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (vcp(02 04 08 10 12 14(01 05 06 08 0B) 16 18 1A 60(01 03)62 6C
6E 70 C8 C9B0 B6 DF F8)prot(monitor)type(LCD)cmds(01 02 03 07 0C
F3)mccs_ver(2.1)asset_eep(64)mpu_ver(004)model(2219P2)mswhql(1))
Parsed output:
VCP: 02 04 08 10 12 14 16 18 1a 60 62 6c 6e 70 b0 b6 c8 c9 df f8
Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/1/2 C [???]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x10: +/68/100 C [Brightness]
Control 0x12: +/61/100 C [Contrast]
Control 0x14: +/5/13 C [???]
Control 0x16: +/58/100 C [Red maximum level]
Control 0x18: +/58/100 C [Green maximum level]
Control 0x1a: +/52/100 C [Blue maximum level]
Control 0x60: +/1/4 C [Input Source Select - Analog]
Control 0x62: +/50/100 C [Audio Speaker Volume Adjust]
Control 0x6c: +/50/100 C [Red minimum level]
Control 0x6e: +/50/100 C [Green minimum level]
Control 0x70: +/50/100 C [Blue minimum level]
Control 0xac: +/6520/65535   [???]
Control 0xae: +/5987/65535   [???]
Control 0xb2: +/1/8   [???]
Control 0xb6: +/3/8 C [???]
Control 0xc8: +/5/65302 C [???]
Control 0xc9: +/4/65535 C [???]
Control 0xcc: +/32/255   [???]
Control 0xdf: +/513/65535 C [???]
Control 0xfe: +/32/255   [???]

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[lebucur <buc...@gm...>]

Hello,

I have a Dell P2421DC and I would like to not receive the warning every 
time I try to use the app.
Also, selecting between normal and confort mode would be great.

Thanks,

[ddccontrol-users] LANG= LC_ALL= ddccontrol -p -c -d

[gernot <m_g...@gm...>]

ddccontrol version 0.4.4
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors.I/O warning : failed to load external
entity "/usr/share/ddccontrol-db/monitor/M@@0000.xml"
Document not parsed successfully.
...I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/GEC0023.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/GEClcd.xml"
Document not parsed successfully.
.....
Detected monitors :
  - Device: dev:/dev/i2c-7
    DDC/CI supported: No
    Monitor Name: VESA standard monitor
    Input type: Analog
  - Device: dev:/dev/i2c-4
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Digital
   (Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-4...
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/GEC0023.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/GEClcd.xml"
Document not parsed successfully.

EDID readings:
     Plug and Play ID: GEC0023 [VESA standard monitor]
     Input type: Digital
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (prot(monitor)type(lcd)model(FALCON)cmds(01 02 03 07 0C 4E
F3 E3)vcp(02 04 05 08 0B 0C 10 12 14(01 04 05 06 07 08 0A 0B) 16 18 1A
6C 6E 70 AC AE B6 C0 C6 C8 C9 CA CC(00 02 03 04 05 08 09 0A 0D) D6(01
04) DC(00 01 02 03 04) DF 60(01 03) 62 8D
FF)mswhql(1)mccs_ver(2.0)asset_eep(32)mpu_ver(01))
Parsed output:
     VCP: 02 04 05 08 0b 0c 10 12 14 16 18 1a 60 62 6c 6e 70 8d ac ae b6
c0 c6 c8 c9 ca cc d6 dc df ff
     Type: LCD

Controls (valid/current/max) [Description - Value name]:
Control 0x02: +/255/255 C [Secondary Degauss]
Control 0x04: +/0/1 C [Restore Factory Defaults]
Control 0x05: +/0/1 C [Restore Brightness and Contrast]
Control 0x08: +/0/1 C [Restore Factory Default Color]
Control 0x0b: +/50/65535 C [???]
Control 0x0c: +/70/170 C [???]
Control 0x10: +/100/100 C [Brightness]
Control 0x12: +/34/100 C [Contrast]
Control 0x14: +/7/11 C [???]
Control 0x16: +/95/100 C [Red maximum level]
Control 0x18: +/75/100 C [Green maximum level]
Control 0x1a: +/75/100 C [Blue maximum level]
Control 0x52: +/0/255   [???]
Control 0x60: +/3/3 C [Input Source Select (Main) - Digital]
Control 0x62: +/55/100 C [Audio Speaker Volume Adjust]
Control 0x6c: +/50/100 C [Red minimum level]
Control 0x6e: +/50/100 C [Green minimum level]
Control 0x70: +/50/100 C [Blue minimum level]
Control 0x8d: +/2/2 C [???]
Control 0xac: +/1964/65281 C [???]
Control 0xae: +/6000/65535 C [???]
Control 0xb2: +/1/8   [???]
Control 0xb6: +/3/4 C [???]
Control 0xc0: +/299/65535 C [???]
Control 0xc6: +/111/65535 C [???]
Control 0xc8: +/18/65535 C [???]
Control 0xc9: +/256/65535 C [???]
Control 0xca: +/2/2 C [???]
Control 0xcc: +/2/255 C [???]
Control 0xd6: +/1/4 C [DPMS Control - On]
Control 0xdc: +/1/4 C [???]
Control 0xdf: +/513/65535 C [???]
Control 0xff: +/0/1 C [???]