Problem with 2D model files

  • llongeri

    llongeri - 2013-09-06

    Hi, I am cloning the frames with a mill and bending procedures. I am cutting the frames to the specifications of the 2D model files with less than a 0.1mm error margin. But after bending, the frames are not even close to the expected size.
    For instance, the FR07_S101 should have a clearance of 30mm between sides, but after a proper bending I get a clearance of about 29mm.

    It seems that the 2D models don't account correctly for the bending.
    I am rebuilding the cutting plans by reverse engineering the 3D models, the FR07_S101 has to by cut about 2mm wider to get a bent frame that matches the 3D model and Robotis's PDF specs.

    I have posted a blog about this at:

  • kdbaumann

    kdbaumann - 2016-04-13

    Has this been fixed in the source files? Also where are the most current set of files kept?

    This is an interesting project for our Maker Lab to try.



Log in to post a comment.

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

No, thanks