Recent changes to dahdi_maint

WikiPage dahdi_maint modified by Eugene Blanchard

Eugene Blanchard — Fri, 27 Apr 2012 15:52:13 -0000

--- v2 
+++ v3 
@@ -52,11 +52,3 @@
 
          dahdi_maint -s1
 
-
-SEE ALSO
-       dahdi_tool(8), dahdi_cfg(8), asterisk(8).
-
-AUTHOR
-       This manual page was written by Tzafrir Cohen .  Permission is granted to copy,  distribute
-       and/or  modify this document under the terms of the GNU General Public License, Version 2 any later version published
-       by the Free Software Foundation.

WikiPage dahdi_maint modified by Eugene Blanchard

Eugene Blanchard — Fri, 27 Apr 2012 15:51:40 -0000

--- v1 
+++ v2 
@@ -2,47 +2,56 @@
        dahdi_maint - Sets Dahdi spans into maintenance mode, e.g.: loopback
 
 SYNOPSIS
-       dahdi_maint -s num [options] dahdi_maint <-h|--help>
-
+       dahdi_maint -s num \[options\] dahdi_maint <-h|--help>
+
 DESCRIPTION
        dahdi_maint  uses  the DAHDI_MAINT interface to set a Dahdi span (port of a Dahdi adapter card) into loopback mode or
        similar maintenance mode.
 
 OPTIONS
+       -h, --help              display help
+
        -s --span num
               The span number. Required.
 
        -l --loopback 
               Loopback type. One of:
 
               localhost
                   loop back towards host
 
               networkline
                   network line loopback
 
               networkpayload
                   network payload loopback
 
               loopup
                   transmit loopup signal
 
               loopdown
                   transmit loopdown signal
 
               off end loopback mode
 
        -i --insert 
               Insert an error of a specific type
 
+        -r, --reset             reset the error counters
+
 EXAMPLES
        Enable network line loopback on span 1:
 
          dahdi_maint -s 1 --loopback networkline
 
        Disable network line loopback on span 1:
 
          dahdi_maint -s 1 --loopback off
+
+       Display error counters on Span 1
+
+         dahdi_maint -s1
+
 
 SEE ALSO
        dahdi_tool(8), dahdi_cfg(8), asterisk(8).

WikiPage dahdi_maint modified by Eugene Blanchard

Eugene Blanchard — Fri, 27 Apr 2012 15:40:26 -0000

NAME dahdi_maint - Sets Dahdi spans into maintenance mode, e.g.: loopback SYNOPSIS dahdi_maint -s num [options] dahdi_maint <-h|--help> DESCRIPTION dahdi_maint uses the DAHDI_MAINT interface to set a Dahdi span (port of a Dahdi adapter card) into loopback mode or similar maintenance mode. OPTIONS -s --span num The span number. Required. -l --loopback Loopback type. One of: localhost loop back towards host networkline network line loopback networkpayload network payload loopback loopup transmit loopup signal loopdown transmit loopdown signal off end loopback mode -i --insert Insert an error of a specific type EXAMPLES Enable network line loopback on span 1: dahdi_maint -s 1 --loopback networkline Disable network line loopback on span 1: dahdi_maint -s 1 --loopback off SEE ALSO dahdi_tool(8), dahdi_cfg(8), asterisk(8). AUTHOR This manual page was written by Tzafrir Cohen . Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.