Recent changes to Linux Command Line Tools

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Sun, 23 Dec 2012 20:02:40 -0000

--- v10
+++ v11
@@ -4,7 +4,7 @@

 __ [dahdi_cfg] __ - The userspace tools to control DAHDI spans/channels

-__ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It works well but remember it requires the "-F" option to work with FreePBX.
+__ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf and /etc/asterisk/dahdi_channels.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It works well but remember it requires the "-F" option to work with FreePBX.

 __ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected <= Run this first as it is a great starting place. This tells you if Dahdi sees your devices when all overs fail.

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Sun, 23 Dec 2012 19:36:25 -0000

--- v9
+++ v10
@@ -4,7 +4,7 @@

 __ [dahdi_cfg] __ - The userspace tools to control DAHDI spans/channels

-__ [dahdi-genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
+__ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It works well but remember it requires the "-F" option to work with FreePBX.

 __ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected <= Run this first as it is a great starting place. This tells you if Dahdi sees your devices when all overs fail.

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Fri, 26 Oct 2012 01:41:01 -0000

--- v8
+++ v9
@@ -4,7 +4,7 @@
 
 __ [dahdi_cfg] __ - The userspace tools to control DAHDI spans/channels
 
-__ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
+__ [dahdi-genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
 
 __ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected <= Run this first as it is a great starting place. This tells you if Dahdi sees your devices when all overs fail.

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Fri, 26 Oct 2012 01:40:24 -0000

--- v7
+++ v8
@@ -4,7 +4,7 @@
 
 __ [dahdi_cfg] __ - The userspace tools to control DAHDI spans/channels
 
-__ [dahdi-genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
+__ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
 
 __ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected <= Run this first as it is a great starting place. This tells you if Dahdi sees your devices when all overs fail.

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Fri, 26 Oct 2012 01:39:43 -0000

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Fri, 26 Oct 2012 01:39:05 -0000

--- v5
+++ v6
@@ -4,7 +4,7 @@
 
 __ [dahdi_cfg] __ - The userspace tools to control DAHDI spans/channels
 
-__ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
+__ [dahdi-genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
 
 __ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected <= Run this first as it is a great starting place. This tells you if Dahdi sees your devices when all overs fail.

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Thu, 21 Jun 2012 15:41:38 -0000

--- v4
+++ v5
@@ -12,7 +12,7 @@
 
 __ [dahdi_monitor] __ - Monitors signal level on analog channel so that you can adjust levels using fxtune.
 
-__ [dahdi_registration] __ - Check if the Astribank spans are registered with DAHDI
+__ [dahdi_registration] __ - Check if the __ Astribank __ spans are registered with DAHDI
 
 __ [dahdi_scan] __ - Generates a list of things DAHDI channels, with some details

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Thu, 21 Jun 2012 15:39:00 -0000

--- v3
+++ v4
@@ -12,6 +12,8 @@
 
 __ [dahdi_monitor] __ - Monitors signal level on analog channel so that you can adjust levels using fxtune.
 
+__ [dahdi_registration] __ - Check if the Astribank spans are registered with DAHDI
+
 __ [dahdi_scan] __ - Generates a list of things DAHDI channels, with some details
 
 __ [dahdi_test] __ - Measures accuracy of the FXO/FXS board software digital signal processing

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Fri, 15 Jun 2012 20:18:44 -0000

--- v2
+++ v3
@@ -6,7 +6,7 @@
 
 __ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.
 
-__ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected
+__ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected <= Run this first as it is a great starting place. This tells you if Dahdi sees your devices when all overs fail.
 
 __ [dahdi_maint] __ - Sets Dahdi spans into maintenance mode, e.g.: loopback

WikiPage Linux Command Line Tools modified by Eugene Blanchard

Eugene Blanchard — Mon, 30 Apr 2012 16:38:50 -0000

--- v1 
+++ v2 
@@ -1,3 +1,7 @@
+__ SUMMARY: __
+
+Click on each to find out options, usage and examples.
+
 __ [dahdi_cfg] __ - The userspace tools to control DAHDI spans/channels
 
 __ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf.  Generates /etc/dahdi/system.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It almost works well but conflicts with FreePBX settings.