Re: [CZT-Devel] Issues Building CZT in Windows

[Jon L. <ja...@bu...>]

Dear Andrius,

I will take a look through the test files, and I will run the install again
so I can get the end of the Maven output for you.

Thanks,
Jon Lockhart


On Sun, Jul 22, 2012 at 6:30 PM, Andrius Velykis <an...@ve...> wrote:

> Dear Jon,
>
> Then there should be one of these .txt or .xml files with failure
> information in surefire-tests directory. These should provide information
> about the failure and hopefully help us debug (the ones you sent previously
> did not have the information). Also, could you send a screenshot of the
> Maven failure (end of the build output)?
>
> Thanks,
> ~Andrius
>
> On 22 Jul 2012, at 23:27, Jon Lockhart wrote:
>
> > Dear Andrius,
> >
> > Yes the build fails and exits, with Maven reporting that there were test
> failures. There is only one reported failure.
> >
> > Is there any other data I could collect to send you?
> >
> > Thanks,
> > Jon Lockhart
> >
> > On Jul 22, 2012 6:16 PM, "Andrius Velykis" <an...@ve...> wrote:
> > Dear Jon,
> >
> > It may be the case that this was an exceptional case that was being
> tested (and the exception should have been thrown as part of the test). Did
> the build stop after this exception and Maven reported that there are 'test
> failures'?
> >
> > Best regards,
> > ~Andrius
> >
> > On 22 Jul 2012, at 23:14, Jon Lockhart wrote:
> >
> > > Dear Andrius,
> > >
> > > That is interesting since from the looks of the terminal, which is the
> screen cap I sent, the error appears to be a exception while running this
> table test.
> > >
> > > I can try running install again and see what I get.
> > >
> > > I am assuming reports aren't generated unless a test runs, pass or
> fail.
> > >
> > > Thanks,
> > > Jon Lockhart.
> > >
> > > On Jul 22, 2012 6:07 PM, "Andrius Velykis" <an...@ve...> wrote:
> > > Dear Jon,
> > >
> > > The files you attached (.txt and .xml) do not have any failures in
> them - all went through successfully there.
> > >
> > > ~Andrius
> > >
> > > On 22 Jul 2012, at 23:01, Jon Lockhart wrote:
> > >
> > > > Dear Andrius,
> > > >
> > > > Just tried installing on my desktop. Everything was running great
> and a lot faster on my Win 7 box, but I hit another error while installing,
> this time on VCG. It says that there was an exception thrown when running
> the one of the test that has tables in it.
> > > >
> > > > As always I have included the Surefire reports for you to look at.
> > > >
> > > > Thanks,
> > > > Jon
> > > >
> > > >
> > > > On Fri, Jul 20, 2012 at 1:39 PM, Andrius Velykis <an...@ve...>
> wrote:
> > > > Dear Jon,
> > > >
> > > > It is possible that you just physically run out - the settings
> -Xmx1024m say that you allocate Maven 1 gig of RAM (1024 megabytes). Please
> try it on your desktop - hope the error goes away.
> > > >
> > > > Best regards,
> > > > ~Andrius
> > > >
> > > >
> > > >
> > > > On 20 Jul 2012, at 17:17, Jon Lockhart wrote:
> > > >
> > > > > Dear Andrius,
> > > > >
> > > > > I realize I only have a gig of ram on this really old laptop I am
> using for developments and things of that nature. Its convenient for taking
> to the lab and back, but I realize now it may not be enough and I may have
> to switch to my desktop if that is the case.
> > > > >
> > > > > When the build quits on the error saying Java has run out of
> space, it says that it is the Java Heap, not PermGen or anything else that
> is out of space.
> > > > >
> > > > > Thanks,
> > > > > Jon Lockhart
> > > > >
> > > > > On Fri, Jul 20, 2012 at 2:31 AM, Andrius Velykis <
> an...@ve...> wrote:
> > > > > Dear Jon,
> > > > >
> > > > > Good to hear about the fixes.
> > > > >
> > > > > Interesting out of memory issues - I am pretty sure 1024 and 512
> are
> > > > > enough. Could you show the exact error message? Is it Heap Space or
> > > > > PermGen or other?
> > > > >
> > > > > How much actual memory do you have on your machine?
> > > > >
> > > > > Best regards,
> > > > > ~Andrius
> > > > >
> > > > > On Fri, Jul 20, 2012 at 2:41 AM, Jon Lockhart <ja...@bu...>
> wrote:
> > > > > > Dear Andrius,
> > > > > >
> > > > > > Those fixes have seemed to help just fine, and I get well beyond
> them now
> > > > > > when installing.
> > > > > >
> > > > > > Now I get an issue when installing the JFlex package. It says I
> am out of
> > > > > > memory and I need to increase the heap size. I had my variables
> set for
> > > > > > Maven to 1024 and 512, just like the INSTALL.md said to do and
> then I bumped
> > > > > > them up to 2048 and 1024 respectively, and that also did not
> seem to help.
> > > > > >
> > > > > > Any suggestions on this error? I don't think I want to increase
> the Java
> > > > > > space too much more.
> > > > > >
> > > > > > Thanks,
> > > > > > Jon Lockhart
> > > > > >
> > > > > >
> > > > > > On Thu, Jul 19, 2012 at 4:18 PM, Andrius Velykis <
> an...@ve...> wrote:
> > > > > >>
> > > > > >> Dear Jon Lochart,
> > > > > >>
> > > > > >> I guess we have to congratulate you again - you found another
> bug
> > > > > >> (filed as #3546060:
> > > > > >>
> > > > > >>
> https://sourceforge.net/tracker/index.php?func=detail&aid=3546060&group_id=86250&atid=578942
> ).
> > > > > >>
> > > > > >> What is _extremely_ suprising that you are the first one to have
> > > > > >> stumbled on it. The issue is that there were problems with
> handling
> > > > > >> paths that have spaces in them (e.g. your "Documents and
> Settings").
> > > > > >> The exceptions appear every time you put the CZT repository on
> a path
> > > > > >> with spaces. Surprisingly, no-one has ever done it! :)
> > > > > >>
> > > > > >> So thanks for the report - I have fixed it in the Git
> repository.
> > > > > >> Please update and re-run the Maven build.
> > > > > >>
> > > > > >> ~Andrius
> > > > > >>
> > > > > >> On Thu, Jul 19, 2012 at 7:16 PM, Jon Lockhart <
> ja...@bu...> wrote:
> > > > > >> > Dear Leo Freitas,
> > > > > >> >
> > > > > >> > I apologize about that. Andrius asked about that before and
> it looks
> > > > > >> > like I
> > > > > >> > forgot to reply to the developer list.
> > > > > >> >
> > > > > >> > I am running Windows XP Professional, Service Pack 3, 32-bit.
> > > > > >> >
> > > > > >> > I am currently not using an IDE with this software but was
> hoping to get
> > > > > >> > it
> > > > > >> > compiled and installed to operate in either Eclipse or jEdit.
> > > > > >> >
> > > > > >> >
> > > > > >> > Dear Andrius Velykis,
> > > > > >> >
> > > > > >> > I reset my variable to be true as you prescribed and then
> tried the hard
> > > > > >> > reset of CZT folder, but I still ran into the same error as
> before.
> > > > > >> >
> > > > > >> > I then proceeded to do a fresh checkout of the git repository
> and that
> > > > > >> > installed just fine for SpecReader.
> > > > > >> >
> > > > > >> > Unfortunately now I run into a new problem. When Typechecker
> is being
> > > > > >> > tested, the first test, which is TypeCheckerTest, an error
> occurs in
> > > > > >> > testing, rather than a failure, but of course this causes the
> build to
> > > > > >> > fail.
> > > > > >> >
> > > > > >> > I have included attached to this email a screen shot of the
> last lines
> > > > > >> > as
> > > > > >> > like before, and I included the xml and txt files from the
> surefire
> > > > > >> > reports.
> > > > > >> >
> > > > > >> >
> > > > > >> > Thanks,
> > > > > >> > Jon Lockhart
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > On Thu, Jul 19, 2012 at 12:31 PM, Andrius Velykis <
> an...@ve...>
> > > > > >> > wrote:
> > > > > >> >>
> > > > > >> >> Dear Jon Lockhart,
> > > > > >> >>
> > > > > >> >> Thanks for spotting the problem. We were not handling the
> Windows line
> > > > > >> >> breaks correctly. It seems that the Specreader module was
> expecting to
> > > > > >> >> be working with Unix-style line breaks (see bug #3545808 for
> details:
> > > > > >> >>
> > > > > >> >>
> > > > > >> >>
> https://sourceforge.net/tracker/?func=detail&aid=3545808&group_id=86250&atid=578942
> ).
> > > > > >> >>
> > > > > >> >> I have committed a workaround which allows tests to go
> through for
> > > > > >> >> now. As a result of this, I have also committed better
> handling of
> > > > > >> >> line breaks when checking out/committing to our Git
> repository. We are
> > > > > >> >> now expecting to have Windows style line breaks on Windows.
> > > > > >> >>
> > > > > >> >> To get the build working, you need to set the conversion to
> > > > > >> >> Windows-style line breaks back to original:
> > > > > >> >>
> > > > > >> >> git config --global core.autocrlf true
> > > > > >> >>
> > > > > >> >> Then you need to reset your Git repository (execute the
> following
> > > > > >> >> commands in the root of your CZT checkout):
> > > > > >> >>
> > > > > >> >> del .git\index
> > > > > >> >> git reset --hard
> > > > > >> >>
> > > > > >> >> Alternatively, you could re-checkout the CZT repository from
> Git.
> > > > > >> >>
> > > > > >> >> Now the Maven build should go through. I tested it on my
> Windows 7
> > > > > >> >> machine.
> > > > > >> >>
> > > > > >> >> Could you report your results?
> > > > > >> >>
> > > > > >> >> Thanks!
> > > > > >> >> ~Andrius
> > > > > >> >>
> > > > > >> >> On Thu, Jul 19, 2012 at 8:28 AM, Leo Freitas
> > > > > >> >> <leo...@ne...> wrote:
> > > > > >> >> > Hi Jon,
> > > > > >> >> >
> > > > > >> >> > This is indeed a puzzling error... in the past I
> encountered such
> > > > > >> >> > character encoding errors when using variations of Eclipse
> and
> > > > > >> >> > Netbeans IDEs
> > > > > >> >> > and the
> > > > > >> >> > problem was associated to the way their character encoding
> was setup
> > > > > >> >> > due
> > > > > >> >> > to, within my Windows environment, me having Portuguese
> and English
> > > > > >> >> > as
> > > > > >> >> > languages with input (i.e. Netbeans v5 i think, thought it
> useful to
> > > > > >> >> > change the character encoding of one test file because it
> somehow
> > > > > >> >> > figured
> > > > > >> >> > out it was for
> > > > > >> >> > Portuguese encoding, despite the fact I haven't asked for
> this
> > > > > >> >> > neither
> > > > > >> >> > used Portuguese there!).
> > > > > >> >> >
> > > > > >> >> > We will try rebuilding it under windows here to see if it
> happens for
> > > > > >> >> > us
> > > > > >> >> > --- otherwise, we would need to know more about your local
> > > > > >> >> > configuration
> > > > > >> >> > both IDE and OS I guess...
> > > > > >> >> >
> > > > > >> >> > Best,
> > > > > >> >> > Leo
> > > > > >> >> >
> > > > > >> >> > On 18 Jul 2012, at 22:06, Andrius Velykis wrote:
> > > > > >> >> >
> > > > > >> >> >> Dear Jon Lockhart,
> > > > > >> >> >>
> > > > > >> >> >> This looks like a very puzzling error - from the output
> it seems
> > > > > >> >> >> that
> > > > > >> >> >> some characters are out of place (e.g. shifted in place).
> Could you
> > > > > >> >> >> give a
> > > > > >> >> >> bit more information on your system? E.g. is it 32bit or
> 64bit
> > > > > >> >> >> windows? What
> > > > > >> >> >> is your system character encoding? Which version of Java
> JDK are you
> > > > > >> >> >> using?
> > > > > >> >> >>
> > > > > >> >> >> Thanks!
> > > > > >> >> >>
> > > > > >> >> >> Best regards,
> > > > > >> >> >> ~Andrius Velykis
> > > > > >> >> >>
> > > > > >> >> >> On 18 Jul 2012, at 20:59, Jon Lockhart wrote:
> > > > > >> >> >>
> > > > > >> >> >>> Dear Andrius Velykis,
> > > > > >> >> >>>
> > > > > >> >> >>> Thanks for all the suggestions and help. I used the
> INSTALL.md file
> > > > > >> >> >>> this time and made some minor adjustments, like to my
> Maven Java
> > > > > >> >> >>> variables,
> > > > > >> >> >>> but I still ran into the same test failures under
> installing
> > > > > >> >> >>> specreader. I
> > > > > >> >> >>> have attached the surefire txt and xml files to this
> email along
> > > > > >> >> >>> with a
> > > > > >> >> >>> screen cap of the final lines of output that is given
> from the
> > > > > >> >> >>> Maven build.
> > > > > >> >> >>>
> > > > > >> >> >>> I hope it will help in figuring out how alleviate the
> problems I am
> > > > > >> >> >>> having with the install. I have tried everything I can
> think of to
> > > > > >> >> >>> get past
> > > > > >> >> >>> these errors.
> > > > > >> >> >>>
> > > > > >> >> >>> Thanks
> > > > > >> >> >>> Jon Lockhart
> > > > > >> >> >>>
> > > > > >> >> >>> On Wed, Jul 18, 2012 at 5:34 AM, Andrius Velykis
> > > > > >> >> >>> <an...@ve...>
> > > > > >> >> >>> wrote:
> > > > > >> >> >>> Dear Jon Lockhart,
> > > > > >> >> >>>
> > > > > >> >> >>> Thanks for reporting your experiences building CZT.
> Could you send
> > > > > >> >> >>> more details about the error that is occurring for you?
> The last
> > > > > >> >> >>> bits
> > > > > >> >> >>> of Maven build output would be good, or if tests are
> failing, try
> > > > > >> >> >>> attaching surefire test reports with the failures.
> > > > > >> >> >>>
> > > > > >> >> >>> Also, there have been some changes since the last
> release, so the
> > > > > >> >> >>> installation instructions on the website may not be fully
> > > > > >> >> >>> up-to-date.
> > > > > >> >> >>>
> > > > > >> >> >>> The SVN repository is no longer updated (currently
> read-only and
> > > > > >> >> >>> will
> > > > > >> >> >>> be removed soon). All new code goes to the Git
> repository. There
> > > > > >> >> >>> are
> > > > > >> >> >>> more up-to-date instructions on building CZT available
> in the Git
> > > > > >> >> >>> repository:
> > > > > >> >> >>>
> > > > > >> >> >>>
> http://czt.git.sourceforge.net/git/gitweb.cgi?p=czt/czt;a=blob_plain;f=INSTALL.md
> > > > > >> >> >>>
> > > > > >> >> >>> Finally, we have quite nice Eclipse plug-ins in the
> latest version
> > > > > >> >> >>> for
> > > > > >> >> >>> CZT as an alternative to jEdit - the update site is
> built together
> > > > > >> >> >>> with the whole CZT.
> > > > > >> >> >>>
> > > > > >> >> >>> I am looking into setting up a continuous integration
> (CI) system
> > > > > >> >> >>> for
> > > > > >> >> >>> CZT soon. Hopefully then we will have "nightly"
> downloads and there
> > > > > >> >> >>> will be less need to build everything manually.
> > > > > >> >> >>>
> > > > > >> >> >>> Best regards,
> > > > > >> >> >>> ~Andrius Velykis
> > > > > >> >> >>>
> > > > > >> >> >>>
> > > > > >> >> >>> On Tue, Jul 17, 2012 at 9:00 PM, Jon Lockhart <
> ja...@bu...>
> > > > > >> >> >>> wrote:
> > > > > >> >> >>>> Dear CZT Developers,
> > > > > >> >> >>>>
> > > > > >> >> >>>> I am having an issue building versions of the CZT tool
> set in
> > > > > >> >> >>>> Windows, and I
> > > > > >> >> >>>> am wondering if anyone has had a similar issue recently
> or in the
> > > > > >> >> >>>> past and
> > > > > >> >> >>>> has a suggestion for handling this problems, or a
> solution, which
> > > > > >> >> >>>> would be
> > > > > >> >> >>>> more beneficial in my case.
> > > > > >> >> >>>>
> > > > > >> >> >>>> I first started with following the installation
> instructions on
> > > > > >> >> >>>> the
> > > > > >> >> >>>> site,
> > > > > >> >> >>>> and downloaded an available copy of the svn version of
> 1.5, git
> > > > > >> >> >>>> bash,
> > > > > >> >> >>>> maven,
> > > > > >> >> >>>> and jedit. While trying to build the czt files, after
> got through
> > > > > >> >> >>>> all
> > > > > >> >> >>>> the
> > > > > >> >> >>>> installation instructions for the various tool sets, I
> ran into a
> > > > > >> >> >>>> dependency
> > > > > >> >> >>>> error on typechecker. Now I know that in the install it
> says that
> > > > > >> >> >>>> dependency
> > > > > >> >> >>>> errors will arise and that I just continue to try
> reinstalling but
> > > > > >> >> >>>> after
> > > > > >> >> >>>> several attempts all resulting in the same error, I
> decided that I
> > > > > >> >> >>>> should
> > > > > >> >> >>>> try getting the latest version of CZT from the git
> repository,
> > > > > >> >> >>>> seeing
> > > > > >> >> >>>> that
> > > > > >> >> >>>> it was a newer version and maybe some of these
> dependency errors
> > > > > >> >> >>>> would be
> > > > > >> >> >>>> resolved. Unfortunately this was not the case and in
> fact I also
> > > > > >> >> >>>> ran
> > > > > >> >> >>>> into an
> > > > > >> >> >>>> error in one of the tests for typechecker. So this time
> around I
> > > > > >> >> >>>> had
> > > > > >> >> >>>> a test
> > > > > >> >> >>>> error occur every time for type checker, and then I am
> always
> > > > > >> >> >>>> running
> > > > > >> >> >>>> into
> > > > > >> >> >>>> the same dependency error with the rules with the
> latest version
> > > > > >> >> >>>> from
> > > > > >> >> >>>> git.
> > > > > >> >> >>>>
> > > > > >> >> >>>> I have tried downloading version 1.5 and 1.6 again
> multiple times
> > > > > >> >> >>>> thinking
> > > > > >> >> >>>> that there was possibly an error in the download I had,
> I have
> > > > > >> >> >>>> tried
> > > > > >> >> >>>> increasing the java stack in my maven variables to 512
> from 256,
> > > > > >> >> >>>> and
> > > > > >> >> >>>> I have
> > > > > >> >> >>>> even tried looking through the mail repository to see
> if anyone
> > > > > >> >> >>>> else
> > > > > >> >> >>>> has had
> > > > > >> >> >>>> an issue with compiling these more recent versions on
> Windows, but
> > > > > >> >> >>>> I
> > > > > >> >> >>>> didn't
> > > > > >> >> >>>> see any.
> > > > > >> >> >>>>
> > > > > >> >> >>>> As I said I am very open to fixes, solutions, or a work
> around for
> > > > > >> >> >>>> getting
> > > > > >> >> >>>> CZT compiled on a Windows box, so that I can import the
> necessary
> > > > > >> >> >>>> jar
> > > > > >> >> >>>> files
> > > > > >> >> >>>> into jEdit so I can start using that for my writing of
> Zed
> > > > > >> >> >>>> specifications.
> > > > > >> >> >>>>
> > > > > >> >> >>>> Thanks,
> > > > > >> >> >>>> Jon Lockhart
> > > > > >> >> >>>>
> > > > > >> >> >>>>
> > > > > >> >> >>>>
> > > > > >> >> >>>>
> ------------------------------------------------------------------------------
> > > > > >> >> >>>> Live Security Virtual Conference
> > > > > >> >> >>>> Exclusive live event will cover all the ways today's
> security and
> > > > > >> >> >>>> threat landscape has changed and how IT managers can
> respond.
> > > > > >> >> >>>> Discussions
> > > > > >> >> >>>> will include endpoint security, mobile security and the
> latest in
> > > > > >> >> >>>> malware
> > > > > >> >> >>>> threats.
> http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> > > > > >> >> >>>> _______________________________________________
> > > > > >> >> >>>> CZT-Devel mailing list
> > > > > >> >> >>>> CZT...@li...
> > > > > >> >> >>>> https://lists.sourceforge.net/lists/listinfo/czt-devel
> > > > > >> >> >>>>
> > > > > >> >> >>>
> > > > > >> >> >>>
> > > > > >> >> >>>
> > > > > >> >> >>>
> <net.sourceforge.czt.specreader.PermuteMarkupTest.txt><SpecReaderError.jpg><TEST-net.sourceforge.czt.specreader.PreludeTest.xml><net.sourceforge.czt.specreader.PreludeTest.txt><TEST-net.sourceforge.czt.specreader.PermuteMarkupTest.xml>
> > > > > >> >> >>
> > > > > >> >> >>
> > > > > >> >> >>
> > > > > >> >> >>
> > > > > >> >> >>
> ------------------------------------------------------------------------------
> > > > > >> >> >> Live Security Virtual Conference
> > > > > >> >> >> Exclusive live event will cover all the ways today's
> security and
> > > > > >> >> >> threat landscape has changed and how IT managers can
> respond.
> > > > > >> >> >> Discussions
> > > > > >> >> >> will include endpoint security, mobile security and the
> latest in
> > > > > >> >> >> malware
> > > > > >> >> >> threats.
> http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> > > > > >> >> >> _______________________________________________
> > > > > >> >> >> CZT-Devel mailing list
> > > > > >> >> >> CZT...@li...
> > > > > >> >> >> https://lists.sourceforge.net/lists/listinfo/czt-devel
> > > > > >> >> >
> > > > > >> >
> > > > > >> >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> <net.sourceforge.czt.vcg.util.DefinitionTableTest.txt><TEST-net.sourceforge.czt.vcg.util.DefinitionTableTest.xml><CZT
> - VCG - Error.jpg>
> > >
> >
>
>