Re: [CZT-Devel] Issues Building CZT in Windows

[Jon L. <ja...@bu...>]

Dear Andrius,

Those fixes have seemed to help just fine, and I get well beyond them now
when installing.

Now I get an issue when installing the JFlex package. It says I am out of
memory and I need to increase the heap size. I had my variables set for
Maven to 1024 and 512, just like the INSTALL.md said to do and then I
bumped them up to 2048 and 1024 respectively, and that also did not seem to
help.

Any suggestions on this error? I don't think I want to increase the Java
space too much more.

Thanks,
Jon Lockhart

On Thu, Jul 19, 2012 at 4:18 PM, Andrius Velykis <an...@ve...> wrote:

> Dear Jon Lochart,
>
> I guess we have to congratulate you again - you found another bug
> (filed as #3546060:
>
> https://sourceforge.net/tracker/index.php?func=detail&aid=3546060&group_id=86250&atid=578942
> ).
>
> What is _extremely_ suprising that you are the first one to have
> stumbled on it. The issue is that there were problems with handling
> paths that have spaces in them (e.g. your "Documents and Settings").
> The exceptions appear every time you put the CZT repository on a path
> with spaces. Surprisingly, no-one has ever done it! :)
>
> So thanks for the report - I have fixed it in the Git repository.
> Please update and re-run the Maven build.
>
> ~Andrius
>
> On Thu, Jul 19, 2012 at 7:16 PM, Jon Lockhart <ja...@bu...> wrote:
> > Dear Leo Freitas,
> >
> > I apologize about that. Andrius asked about that before and it looks
> like I
> > forgot to reply to the developer list.
> >
> > I am running Windows XP Professional, Service Pack 3, 32-bit.
> >
> > I am currently not using an IDE with this software but was hoping to get
> it
> > compiled and installed to operate in either Eclipse or jEdit.
> >
> >
> > Dear Andrius Velykis,
> >
> > I reset my variable to be true as you prescribed and then tried the hard
> > reset of CZT folder, but I still ran into the same error as before.
> >
> > I then proceeded to do a fresh checkout of the git repository and that
> > installed just fine for SpecReader.
> >
> > Unfortunately now I run into a new problem. When Typechecker is being
> > tested, the first test, which is TypeCheckerTest, an error occurs in
> > testing, rather than a failure, but of course this causes the build to
> fail.
> >
> > I have included attached to this email a screen shot of the last lines as
> > like before, and I included the xml and txt files from the surefire
> reports.
> >
> >
> > Thanks,
> > Jon Lockhart
> >
> >
> >
> > On Thu, Jul 19, 2012 at 12:31 PM, Andrius Velykis <an...@ve...>
> > wrote:
> >>
> >> Dear Jon Lockhart,
> >>
> >> Thanks for spotting the problem. We were not handling the Windows line
> >> breaks correctly. It seems that the Specreader module was expecting to
> >> be working with Unix-style line breaks (see bug #3545808 for details:
> >>
> >>
> https://sourceforge.net/tracker/?func=detail&aid=3545808&group_id=86250&atid=578942
> ).
> >>
> >> I have committed a workaround which allows tests to go through for
> >> now. As a result of this, I have also committed better handling of
> >> line breaks when checking out/committing to our Git repository. We are
> >> now expecting to have Windows style line breaks on Windows.
> >>
> >> To get the build working, you need to set the conversion to
> >> Windows-style line breaks back to original:
> >>
> >> git config --global core.autocrlf true
> >>
> >> Then you need to reset your Git repository (execute the following
> >> commands in the root of your CZT checkout):
> >>
> >> del .git\index
> >> git reset --hard
> >>
> >> Alternatively, you could re-checkout the CZT repository from Git.
> >>
> >> Now the Maven build should go through. I tested it on my Windows 7
> >> machine.
> >>
> >> Could you report your results?
> >>
> >> Thanks!
> >> ~Andrius
> >>
> >> On Thu, Jul 19, 2012 at 8:28 AM, Leo Freitas
> >> <leo...@ne...> wrote:
> >> > Hi Jon,
> >> >
> >> > This is indeed a puzzling error... in the past I encountered such
> >> > character encoding errors when using variations of Eclipse and
> Netbeans IDEs
> >> > and the
> >> > problem was associated to the way their character encoding was setup
> due
> >> > to, within my Windows environment, me having Portuguese and English as
> >> > languages with input (i.e. Netbeans v5 i think, thought it useful to
> >> > change the character encoding of one test file because it somehow
> figured
> >> > out it was for
> >> > Portuguese encoding, despite the fact I haven't asked for this neither
> >> > used Portuguese there!).
> >> >
> >> > We will try rebuilding it under windows here to see if it happens for
> us
> >> > --- otherwise, we would need to know more about your local
> configuration
> >> > both IDE and OS I guess...
> >> >
> >> > Best,
> >> > Leo
> >> >
> >> > On 18 Jul 2012, at 22:06, Andrius Velykis wrote:
> >> >
> >> >> Dear Jon Lockhart,
> >> >>
> >> >> This looks like a very puzzling error - from the output it seems that
> >> >> some characters are out of place (e.g. shifted in place). Could you
> give a
> >> >> bit more information on your system? E.g. is it 32bit or 64bit
> windows? What
> >> >> is your system character encoding? Which version of Java JDK are you
> using?
> >> >>
> >> >> Thanks!
> >> >>
> >> >> Best regards,
> >> >> ~Andrius Velykis
> >> >>
> >> >> On 18 Jul 2012, at 20:59, Jon Lockhart wrote:
> >> >>
> >> >>> Dear Andrius Velykis,
> >> >>>
> >> >>> Thanks for all the suggestions and help. I used the INSTALL.md file
> >> >>> this time and made some minor adjustments, like to my Maven Java
> variables,
> >> >>> but I still ran into the same test failures under installing
> specreader. I
> >> >>> have attached the surefire txt and xml files to this email along
> with a
> >> >>> screen cap of the final lines of output that is given from the
> Maven build.
> >> >>>
> >> >>> I hope it will help in figuring out how alleviate the problems I am
> >> >>> having with the install. I have tried everything I can think of to
> get past
> >> >>> these errors.
> >> >>>
> >> >>> Thanks
> >> >>> Jon Lockhart
> >> >>>
> >> >>> On Wed, Jul 18, 2012 at 5:34 AM, Andrius Velykis <
> an...@ve...>
> >> >>> wrote:
> >> >>> Dear Jon Lockhart,
> >> >>>
> >> >>> Thanks for reporting your experiences building CZT. Could you send
> >> >>> more details about the error that is occurring for you? The last
> bits
> >> >>> of Maven build output would be good, or if tests are failing, try
> >> >>> attaching surefire test reports with the failures.
> >> >>>
> >> >>> Also, there have been some changes since the last release, so the
> >> >>> installation instructions on the website may not be fully
> up-to-date.
> >> >>>
> >> >>> The SVN repository is no longer updated (currently read-only and
> will
> >> >>> be removed soon). All new code goes to the Git repository. There are
> >> >>> more up-to-date instructions on building CZT available in the Git
> >> >>> repository:
> >> >>>
> http://czt.git.sourceforge.net/git/gitweb.cgi?p=czt/czt;a=blob_plain;f=INSTALL.md
> >> >>>
> >> >>> Finally, we have quite nice Eclipse plug-ins in the latest version
> for
> >> >>> CZT as an alternative to jEdit - the update site is built together
> >> >>> with the whole CZT.
> >> >>>
> >> >>> I am looking into setting up a continuous integration (CI) system
> for
> >> >>> CZT soon. Hopefully then we will have "nightly" downloads and there
> >> >>> will be less need to build everything manually.
> >> >>>
> >> >>> Best regards,
> >> >>> ~Andrius Velykis
> >> >>>
> >> >>>
> >> >>> On Tue, Jul 17, 2012 at 9:00 PM, Jon Lockhart <ja...@bu...>
> >> >>> wrote:
> >> >>>> Dear CZT Developers,
> >> >>>>
> >> >>>> I am having an issue building versions of the CZT tool set in
> >> >>>> Windows, and I
> >> >>>> am wondering if anyone has had a similar issue recently or in the
> >> >>>> past and
> >> >>>> has a suggestion for handling this problems, or a solution, which
> >> >>>> would be
> >> >>>> more beneficial in my case.
> >> >>>>
> >> >>>> I first started with following the installation instructions on the
> >> >>>> site,
> >> >>>> and downloaded an available copy of the svn version of 1.5, git
> bash,
> >> >>>> maven,
> >> >>>> and jedit. While trying to build the czt files, after got through
> all
> >> >>>> the
> >> >>>> installation instructions for the various tool sets, I ran into a
> >> >>>> dependency
> >> >>>> error on typechecker. Now I know that in the install it says that
> >> >>>> dependency
> >> >>>> errors will arise and that I just continue to try reinstalling but
> >> >>>> after
> >> >>>> several attempts all resulting in the same error, I decided that I
> >> >>>> should
> >> >>>> try getting the latest version of CZT from the git repository,
> seeing
> >> >>>> that
> >> >>>> it was a newer version and maybe some of these dependency errors
> >> >>>> would be
> >> >>>> resolved. Unfortunately this was not the case and in fact I also
> ran
> >> >>>> into an
> >> >>>> error in one of the tests for typechecker. So this time around I
> had
> >> >>>> a test
> >> >>>> error occur every time for type checker, and then I am always
> running
> >> >>>> into
> >> >>>> the same dependency error with the rules with the latest version
> from
> >> >>>> git.
> >> >>>>
> >> >>>> I have tried downloading version 1.5 and 1.6 again multiple times
> >> >>>> thinking
> >> >>>> that there was possibly an error in the download I had, I have
> tried
> >> >>>> increasing the java stack in my maven variables to 512 from 256,
> and
> >> >>>> I have
> >> >>>> even tried looking through the mail repository to see if anyone
> else
> >> >>>> has had
> >> >>>> an issue with compiling these more recent versions on Windows, but
> I
> >> >>>> didn't
> >> >>>> see any.
> >> >>>>
> >> >>>> As I said I am very open to fixes, solutions, or a work around for
> >> >>>> getting
> >> >>>> CZT compiled on a Windows box, so that I can import the necessary
> jar
> >> >>>> files
> >> >>>> into jEdit so I can start using that for my writing of Zed
> >> >>>> specifications.
> >> >>>>
> >> >>>> Thanks,
> >> >>>> Jon Lockhart
> >> >>>>
> >> >>>>
> >> >>>>
> ------------------------------------------------------------------------------
> >> >>>> Live Security Virtual Conference
> >> >>>> Exclusive live event will cover all the ways today's security and
> >> >>>> threat landscape has changed and how IT managers can respond.
> >> >>>> Discussions
> >> >>>> will include endpoint security, mobile security and the latest in
> >> >>>> malware
> >> >>>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> >> >>>> _______________________________________________
> >> >>>> CZT-Devel mailing list
> >> >>>> CZT...@li...
> >> >>>> https://lists.sourceforge.net/lists/listinfo/czt-devel
> >> >>>>
> >> >>>
> >> >>>
> >> >>>
> <net.sourceforge.czt.specreader.PermuteMarkupTest.txt><SpecReaderError.jpg><TEST-net.sourceforge.czt.specreader.PreludeTest.xml><net.sourceforge.czt.specreader.PreludeTest.txt><TEST-net.sourceforge.czt.specreader.PermuteMarkupTest.xml>
> >> >>
> >> >>
> >> >>
> >> >>
> ------------------------------------------------------------------------------
> >> >> Live Security Virtual Conference
> >> >> Exclusive live event will cover all the ways today's security and
> >> >> threat landscape has changed and how IT managers can respond.
> >> >> Discussions
> >> >> will include endpoint security, mobile security and the latest in
> >> >> malware
> >> >> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> >> >> _______________________________________________
> >> >> CZT-Devel mailing list
> >> >> CZT...@li...
> >> >> https://lists.sourceforge.net/lists/listinfo/czt-devel
> >> >
> >
> >
>