How to find requests per second?

[G, J. <Jen...@es...>]

Given below is my configuration

########### GENERAL SECTION ################################

BATCH_NAME= fetch-prob
CLIENTS_NUM_MAX=500
CLIENTS_NUM_START=100
CLIENTS_RAMPUP_INC=100
INTERFACE   =eth0
NETMASK = 2
IP_ADDR_MIN= 80.168.92.248
IP_ADDR_MAX= 80.168.92.248
CYCLES_NUM= 1
URLS_NUM= 2
########### URL SECTION ####################################

URL=http://www.xxxxxxx.com
URL_SHORT_NAME="Home"
REQUEST_TYPE=GET
TIMER_URL_COMPLETION = 0

URL=http://www.xxxxx.com/live.html
URL_SHORT_NAME="live"
REQUEST_TYPE=GET
TIMER_URL_COMPLETION = 0




And my results are ,


Summary stats (runs:15 secs, CAPS-average:34):
H/F   Req:938,1xx:0,2xx:928,3xx:0,4xx:0,5xx:0,Err:21,T-Err:0,D:574ms,D-2xx:574ms,Ti:9731503B/s,To:8915B/s
H/F/S Req:0,1xx:0,2xx:0,3xx:0,4xx:0,5xx:0,Err:0,T-Err:0,D:0ms,D-2xx:0ms,Ti:0B/s,To:0B/s
=================================================================================
Manual: clients:max[500],curr[21]. Inc num: [+|*].
=================================================================================
H/F   Req:20,1xx:0,2xx:30,3xx:0,4xx:0,5xx:0,Err:0,T-Err:0,D:4408ms,D-2xx:4408ms,Ti:1840185B/s,To:1086B/s
H/F/S Req:0,1xx:0,2xx:0,3xx:0,4xx:0,5xx:0,Err:0,T-Err:0,D:0ms,D-2xx:0ms,Ti:0B/s,To:0B/s

=======================================================================================
End of the test for batch: fetch-prob
=======================================================================================


Test total duration was 18 seconds and CAPS average 28:
H/F   Req:958,1xx:0,2xx:958,3xx:0,4xx:0,5xx:0,Err:21,T-Err:0,D:694ms,D-2xx:694ms,Ti:8416283B/s,To:7610B/s
H/F/S Req:0,1xx:0,2xx:0,3xx:0,4xx:0,5xx:0,Err:0,T-Err:0,D:0ms,D-2xx:0ms,Ti:0B/s,To:0B/s



My Question is


1)      How do I find requests per second for each url?