Hello,
I believe you can do that, by calling those methods in the setUp()
method.
Luis Joaquim
Friday, August 9, 2002, 1:53:59 PM, you wrote:
BM> I have made a test fixture and I can call it by using a test runner. That's
BM> ok.
BM> But now my problem is that I need to call some functions on my instance of
BM> my test object before I can really start to use it.
BM> How to do this?
BM> From what I understand this is not possible using the helper macro's. Is
BM> there another way?
BM> ----------------------------------------------------------------------------
BM> Marc Bogaerts - Software Engineer
BM> Phone : +32 (0)2 370.36.37 - e-mail : mb...@fa...
BM> ----------------------------------------------------------------------------
BM> S.A. FABRICOM N.V.
BM> Rue Gatti de Gamond, 254 - B-1180 Bruxelles - Belgium
BM> General Phone : +32 (0)2 370.33.35 - Fax : +32 (0)2 370.32.22
BM> ----------------------------------------------------------------------------
BM> The information contained in this e-mail is intended only for the person or
BM> entity to which it is addressed and may contain confidential and / or
BM> privileged material. If you are not the intended recipient of this e-mail,
BM> the use of this information or any disclosure, copying or distribution is
BM> prohibited and may be unlawful.
BM> If you received this in error, please contact the sender and delete the
BM> material from any computer.
BM> This electronic transmission is intended exclusively for the person to
BM> whom it is addressed and may contain privileged and confidential material.
BM> Any disclosure, copying, distribution or other action based upon
BM> the information by persons other than the intended recipient
BM> is prohibited. If you receive this message in error, please contact the
BM> sender and delete the material.
BM> Our company does not warrant a proper and complete transmission of this
BM> information, nor does it accept liability for any delays.
----------------------------------------------------------------------------
------------
Critical Software has changed address and phones -
please check new contacts below
----------------------------------------------------------------------------
------------
---
Luis Joaquim
Critical Software, SA
EN1/IC2, Km 185,6, Banhos Secos, Santa Clara
3040-032 Coimbra
Tel: +351.239.801300, Fax: +351.239.801319
http://www.criticalsoftware.com
ljo...@cr...
|
