Menu
▾
▴
corelinux-develop
|
From: Christophe Prud'h. <pru...@MI...> - 2000-09-03 02:47:04
|
ok everything is fine for me so far dvi ps and pdf are working fine argh I don't like this when the behavior is not uniform could you send me the log file compressed ? what you can do also is remod the \batchmode at the beginning of the tex file and rerun interactively you should see where it fails C. -- Christophe Prud'homme | MIT, 77, Mass Ave, Rm 3-243 | Do nothing unless you must, Cambridge MA 02139 | and when you must act Tel (Office) : (00 1) (617) 253 0229 | -- hesitate. Fax (Office) : (00 1) (617) 258 8559 | http://augustine.mit.edu/~prudhomm | Following the hacker spirit |
|
From: Frank V. C. <fr...@co...> - 2000-09-03 03:07:15
|
Christophe Prud'homme wrote: > > ok > everything is fine for me so far > dvi ps and pdf are working fine > argh I don't like this when the behavior is not uniform > > could you send me the log file compressed ? > what you can do also is remod the \batchmode at the beginning of the tex file > and rerun interactively > you should see where it fails > Where do I remod the batch file? Let me ask you this first, if I restore the earlier version of corelinux.cfg.in and re-run, do you think that would matter as, again, I am running 1.2.0 of doxygen. It was working prior to this change. -- Frank V. Castellucci http://corelinux.sourceforge.net OOA/OOD/C++ Standards and Guidelines for Linux http://PythPat.sourceforge.net Pythons Pattern Package |
|
From: Christophe Prud'h. <pru...@MI...> - 2000-09-03 03:19:13
|
> Where do I remod the batch file? what is remod ? you go in latex/ edit refman.tex remove the \batchmode (first line) and try again > > Let me ask you this first, if I restore the earlier version of > corelinux.cfg.in and re-run, do you think that would matter as, again, I > am running 1.2.0 of doxygen. It was working prior to this change. I don't think it is version related but well may be could you try to update? I just changed a few options in doxygen.cfg.in if you restore the file that should work for you but we lose the examples and the macros expansion C. -- Christophe Prud'homme | MIT, 77, Mass Ave, Rm 3-243 | A wise person makes his own Cambridge MA 02139 | decisions, Tel (Office) : (00 1) (617) 253 0229 | a weak one obeys public opinion. Fax (Office) : (00 1) (617) 258 8559 | -- Chinese proverb http://augustine.mit.edu/~prudhomm | Following the hacker spirit |
|
From: Frank V. C. <fr...@co...> - 2000-09-03 03:23:21
|
Christophe Prud'homme wrote: > > > Where do I remod the batch file? > what is remod ? I don't know, that was your original note "remod the \batchmode" > you go in latex/ > edit refman.tex > remove the \batchmode (first line) > and try again But all the files are removed as the *.rpms are written, everything is cleaned up. > > > > > Let me ask you this first, if I restore the earlier version of > > corelinux.cfg.in and re-run, do you think that would matter as, again, I > > am running 1.2.0 of doxygen. It was working prior to this change. > I don't think it is version related but well may be > could you try to update? I just changed a few options in doxygen.cfg.in Ok, I have 1.2.1 tar.gz, you want me to make doxygen, install, and try building rpm again? > > if you restore the file that should work for you > but we lose the examples and the macros expansion > > C. > -- > Christophe Prud'homme | > MIT, 77, Mass Ave, Rm 3-243 | A wise person makes his own > Cambridge MA 02139 | decisions, > Tel (Office) : (00 1) (617) 253 0229 | a weak one obeys public opinion. > Fax (Office) : (00 1) (617) 258 8559 | -- Chinese proverb > http://augustine.mit.edu/~prudhomm | > Following the hacker spirit > _______________________________________________ > Corelinux-develop mailing list > Cor...@li... > http://lists.sourceforge.net/mailman/listinfo/corelinux-develop -- Frank V. Castellucci http://corelinux.sourceforge.net OOA/OOD/C++ Standards and Guidelines for Linux http://PythPat.sourceforge.net Pythons Pattern Package |
|
From: Christophe Prud'h. <pru...@MI...> - 2000-09-03 03:31:30
|
On Sat, 02 Sep 2000, you wrote: > Christophe Prud'homme wrote: > > > Where do I remod the batch file? > > > > what is remod ? > > I don't know, that was your original note "remod the \batchmode" :) remod=remove > But all the files are removed as the *.rpms are written, everything is > cleaned up. and if you just do a configure and go in doc/ and try the doxygen command does it work correctly or does it fail as well as the rpm ? -- Christophe Prud'homme | MIT, 77, Mass Ave, Rm 3-243 | C'est de la buche? Cambridge MA 02139 | Non c'est kloug! Tel (Office) : (00 1) (617) 253 0229 | C'est colmatté avec du schpountz... Fax (Office) : (00 1) (617) 258 8559 | -- Le Pere Noel est une ordure http://augustine.mit.edu/~prudhomm | Following the hacker spirit |
|
From: Frank V. C. <fr...@co...> - 2000-09-03 03:35:44
|
Christophe Prud'homme wrote: > > On Sat, 02 Sep 2000, you wrote: > > Christophe Prud'homme wrote: > > > > Where do I remod the batch file? > > > > > > what is remod ? > > > > I don't know, that was your original note "remod the \batchmode" > :) > remod=remove > > > But all the files are removed as the *.rpms are written, everything is > > cleaned up. > > and if you just do a configure and go in doc/ and try the doxygen command > does it work correctly or does it fail as well as the rpm ? Ah, ok, forgive my ignorance, I will try that. -- Frank V. Castellucci |
|
From: Frank V. C. <fr...@co...> - 2000-09-03 03:47:29
Attachments:
fcout.log.gz
|
Christophe Prud'homme wrote: > > On Sat, 02 Sep 2000, you wrote: > > Christophe Prud'homme wrote: > > > > Where do I remod the batch file? > > > > > > what is remod ? > > > > I don't know, that was your original note "remod the \batchmode" > :) > remod=remove > > > But all the files are removed as the *.rpms are written, everything is > > cleaned up. > > and if you just do a configure and go in doc/ and try the doxygen command > does it work correctly or does it fail as well as the rpm ? > Yes it fails, I have attached the log (I removed \batchmode as you suggested). There seems to be a large number of errors which I can't discern due to my incompetence with tex stuff. -- Frank V. Castellucci http://corelinux.sourceforge.net OOA/OOD/C++ Standards and Guidelines for Linux http://PythPat.sourceforge.net Pythons Pattern Package |
|
From: Hans - D. <dul...@eg...> - 2000-09-04 19:58:10
|
On Sat, 2 Sep 2000, Frank V. Castellucci wrote: > Date: Sat, 02 Sep 2000 23:50:02 -0400 > From: Frank V. Castellucci <fr...@co...> > Reply-To: cor...@li... > To: cor...@li... > Subject: Re: [Corelinux-develop] don't find the problem with pdf or ps > > Christophe Prud'homme wrote: > > > > On Sat, 02 Sep 2000, you wrote: > > > Christophe Prud'homme wrote: > > > > > Where do I remod the batch file? > > > > > > > > what is remod ? > > > > > > I don't know, that was your original note "remod the \batchmode" > > :) > > remod=remove > > > > > But all the files are removed as the *.rpms are written, everything is > > > cleaned up. > > > > and if you just do a configure and go in doc/ and try the doxygen command > > does it work correctly or does it fail as well as the rpm ? > > > > Yes it fails, I have attached the log (I removed \batchmode as you > suggested). There seems to be a large number of errors which I can't > discern due to my incompetence with tex stuff. > > Everything seems ok on my machine. This is what I did: cd corelinux/doc doxygen corelinux.cfg cd latex [remove \batchmode from refman.tex] make -- Hans Dulimarta, Ph.D. dul...@co... P: 517-432-7589 http://www.egr.msu.edu/~dulimart F: 760-281-7691 http://corelinux.sourceforge.net Elec. & Comp. Engg., Mich. State Univ., E. Lansing, MI 48824 |
|
From: Frank V. C. <fr...@co...> - 2000-09-04 20:15:11
|
Hans, please hold back any check-ins until I have a chance to tag the current tree with rel-0-4-27. I won't do this until I have a release up on SourceForge. I really wish SourceForge provided a more robust configuration management system, but it didn't. Oh well. Thanks PS: I was able to do the same, although the pdf and ps are (by C. definition) handled differently. Hans - Dulimarta wrote: > > On Sat, 2 Sep 2000, Frank V. Castellucci wrote: > > > Date: Sat, 02 Sep 2000 23:50:02 -0400 > > From: Frank V. Castellucci <fr...@co...> > > Reply-To: cor...@li... > > To: cor...@li... > > Subject: Re: [Corelinux-develop] don't find the problem with pdf or ps > > > > Christophe Prud'homme wrote: > > > > > > On Sat, 02 Sep 2000, you wrote: > > > > Christophe Prud'homme wrote: > > > > > > Where do I remod the batch file? > > > > > > > > > > what is remod ? > > > > > > > > I don't know, that was your original note "remod the \batchmode" > > > :) > > > remod=remove > > > > > > > But all the files are removed as the *.rpms are written, everything is > > > > cleaned up. > > > > > > and if you just do a configure and go in doc/ and try the doxygen command > > > does it work correctly or does it fail as well as the rpm ? > > > > > > > Yes it fails, I have attached the log (I removed \batchmode as you > > suggested). There seems to be a large number of errors which I can't > > discern due to my incompetence with tex stuff. > > > > > > Everything seems ok on my machine. This is what I did: > > cd corelinux/doc > doxygen corelinux.cfg > cd latex > [remove \batchmode from refman.tex] > make > > -- > Hans Dulimarta, Ph.D. dul...@co... > P: 517-432-7589 http://www.egr.msu.edu/~dulimart > F: 760-281-7691 http://corelinux.sourceforge.net > Elec. & Comp. Engg., Mich. State Univ., E. Lansing, MI 48824 > > _______________________________________________ > Corelinux-develop mailing list > Cor...@li... > http://lists.sourceforge.net/mailman/listinfo/corelinux-develop -- Frank V. Castellucci http://corelinux.sourceforge.net OOA/OOD/C++ Standards and Guidelines for Linux http://PythPat.sourceforge.net Pythons Pattern Package |
|
From: Hans - D. <dul...@eg...> - 2000-09-05 13:52:40
|
On Mon, 4 Sep 2000, Frank V. Castellucci wrote: > Date: Mon, 04 Sep 2000 16:17:46 -0400 > From: Frank V. Castellucci <fr...@co...> > Reply-To: cor...@li... > To: cor...@li... > Subject: Re: [Corelinux-develop] don't find the problem with pdf or ps > > Hans, please hold back any check-ins until I have a chance to tag the > current tree with rel-0-4-27. I won't do this until I have a release up > on SourceForge. > OK, I'll wait for your cue. > I really wish SourceForge provided a more robust configuration > management system, but it didn't. Oh well. > > Thanks > > PS: I was able to do the same, although the pdf and ps are (by C. > definition) handled differently. > -- Hans Dulimarta, Ph.D. dul...@co... P: 517-432-7589 http://www.egr.msu.edu/~dulimart F: 760-281-7691 http://corelinux.sourceforge.net Elec. & Comp. Engg., Mich. State Univ., E. Lansing, MI 48824 |
|
From: Frank V. C. <fr...@co...> - 2000-09-05 19:59:12
|
Hans - Dulimarta wrote: > > On Mon, 4 Sep 2000, Frank V. Castellucci wrote: > > > Date: Mon, 04 Sep 2000 16:17:46 -0400 > > From: Frank V. Castellucci <fr...@co...> > > Reply-To: cor...@li... > > To: cor...@li... > > Subject: Re: [Corelinux-develop] don't find the problem with pdf or ps > > > > Hans, please hold back any check-ins until I have a chance to tag the > > current tree with rel-0-4-27. I won't do this until I have a release up > > on SourceForge. > > > > OK, I'll wait for your cue. Ok, 0.4.27 is tagged, I updated configure.in to hold the 0.4.28 build number so you are free to check-in at any time. > > > I really wish SourceForge provided a more robust configuration > > management system, but it didn't. Oh well. > > > > Thanks > > > > PS: I was able to do the same, although the pdf and ps are (by C. > > definition) handled differently. > > > > -- > Hans Dulimarta, Ph.D. dul...@co... > P: 517-432-7589 http://www.egr.msu.edu/~dulimart > F: 760-281-7691 http://corelinux.sourceforge.net > Elec. & Comp. Engg., Mich. State Univ., E. Lansing, MI 48824 > > _______________________________________________ > Corelinux-develop mailing list > Cor...@li... > http://lists.sourceforge.net/mailman/listinfo/corelinux-develop -- Frank V. Castellucci http://corelinux.sourceforge.net OOA/OOD/C++ Standards and Guidelines for Linux http://PythPat.sourceforge.net Pythons Pattern Package |
