Convert-Screenshot-To-Text-1.0.0

安裝方法:

1.安裝 (First)Tesseract-ocr-w64-setup-5.3.0.20221222.exe (https://github.com/UB-Mannheim/tesseract/wiki)
-安裝時,記得安裝所有語言包(不是指介面語言)

2.安裝 (After Tesseract)Create Environment Variables.exe 或選擇手動添加環境變數，在「環境變數」的「Path」添加路徑 C:\Program Files\Tesseract-OCR\
-添加環境變數後,可能需要重新開機

作者: A_A
Email:A_A_kent_leung@hotmail.com
Paypal(捐款):A_A_kent_leung@hotmail.com

使用說明:

*此程式暫只支持繁、簡、英、法、日 (此引擎識別英文的效果最好，中文就較差(特別是小範圍的中文字); 法文、日文未經測試)

1.打開(Standalone) Convert Screenshot To Text 1.0.0.exe

2.按「Screen Capture」截圖後，程式會被最小化

3.調整「Scale」值(0.5-2)按「Update」可讓截圖完整顯示出來 (注意利用此值放大/縮小截圖不會影響識字品質)
-例如3840 X 2160 下且縮放比為:150%,「Scale」值可設為1.6

4..按左鍵拖動以框選所需文字

5.等待一會兒,結果就會顥示出來

Installation:

1. Install (First) Tesseract-ocr-w64-setup-5.3.0.20221222.exe (https://github.com/UB-Mannheim/tesseract/wiki)

2. During the installation process, please make sure to install all language packs (not the interface language).

3. Install (After Tesseract) Create Environment Variables.exe,
   or choose to manually add environment variables: Add the path "C:\Program Files\Tesseract-OCR" to the "Path" variable under "Environment Variables".

4. After adding the environment variable, you may need to restart your computer.

Author: A_A
Email: A_A_kent_leung@hotmail.com
Paypal (Donation): A_A_kent_leung@hotmail.com

Instructions for use:

*This program currently only supports Traditional Chinese, Simplified Chinese, English, French, and Japanese. (The engine's English recognition is the most accurate, while Chinese recognition is relatively poor, especially for small area; French and Japanese have not been tested.)

1. Open (Standalone) Convert Screenshot To Text 1.0.0.exe.

2. Click "Screen Capture" to take a screenshot, and the program will be minimized.

3. Adjust the "Scale" value (0.5-2) and click "Update" to display the entire screenshot. (Note that using this value to zoom in or out of the screenshot will not affect the character recognition quality.)

4. For example, when using a resolution of 3840 X 2160 and a dpi level of 150%, the "Scale" value can be set to 1.6.

5. Use the left mouse button to drag and select the desired text.

6. Wait a moment, and the result will be displayed.

安装方法:

1.安装 (First)Tesseract-ocr-w64-setup-5.3.0.20221222.exe (https://github.com/UB-Mannheim/tesseract/wiki)
-安装时,记得安装所有语言包(不是指接口语言)

2.安装 (After Tesseract)Create Environment Variables.exe 或选择手动添加环境变量，在「环境变量」的「Path」添加路径 C:\Program Files\Tesseract-OCR\
-添加环境变量后,可能需要重新启动

作者: A_A
Email:A_A_kent_leung@hotmail.com
Paypal(捐款):A_A_kent_leung@hotmail.com

使用说明:

*此程序暂只支持繁、简、英、法、日 (此引擎识别英文的效果最好，中文就较差(特别是小范围的中文字); 法文、日文未经测试)

1.打开(Standalone) Convert Screenshot To Text 1.0.0.exe

2.按「Screen Capture」截图后，程序会被最小化

3.调整「Scale」值(0.5-2)按「Update」可让截图完整显示出来 (注意利用此值放大/缩小截图不会影响识字质量)
-例如3840 X 2160 下且缩放比为:150%,「Scale」值可设为1.6

4..按左键拖动以框选所需文字

5.等待一会儿,结果就会颢示出来